http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고속 무선 통신을 위한 비선형 MMSE 검출기를 갖는 터보 처리 다중 입출력 시스템
강병권,조동균,Kang, Byeong-Gwon,Cho, Dong-Kyun 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.12
본 논문에서는 터보 처리 MIMO 시스템에서 시스템의 성능을 향상시키기 위해 기존의 선형 MMSE 검출기를 기반으로 간단한 비선형 MMSE 검출기를 유도하고 가우시안 근사화와 비선형 MMSE 검출기를 갖는 새로운 터보 처리 MIMO 시스템을 제안하였다. 터보 부호를 사용하는 터보 처리 MIMO 시스템에서 기존의 시스템과 제안된 시스템의 프레임 오율 성능을 살펴보면 1 % FER을 기준으로는 송신과 수신안테나 수를 각각 N과 M이라 할 때, M=N=4인 경우 제안된 시스템은 기존의 시스템보다 약 0.5 dB의 성능 향상을 갖고, M=N=8인 경우 제안된 시스템은 기존의 시스템보다 약 0.4 dB의 성능 향상을 갖는다. 또한 평균 외부 반복 횟수를 살펴보면 제안된 시스템이 기존의 시스템보다 낮은 수준을 보여주었다. 제안된 시스템의 비선형 MMSE 검출기가 수신신호의 측정값에 근거하여 부호화된 비트의 연 출력을 결정함으로써 심볼 값을 판정하는데 필요한 영역에서의 불확실한 부분을 줄였기 때문에 성능이 향상될 수 있었다. In this paper, a simple and nonlinear MMSE detector is derived from the conventional linear MMSE detector to improve the system performance in turbo processing MIMO system and a new turbo processing MIMO system with nonlinear MMSE detector and Gaussian approximation is proposed. In turbo coded turbo processing MIMO system, the proposed system of M=N=4 performs about 0.5 dB better than the conventional system and the proposed system of M=N=8 performs about 0.4 dB better than conventional system at 1 % FER. In addition, the average number of outer iterations of proposed system shows lower than that of conventional system. This is caused by the fact that the nonlinear MMSE detector of proposed system decides soft-outputs of coded bits based on the observation of received signals, so that it can reduce the uncertainty region in estimating the coded bits.
안테나 및 레이다 분야 : 보안등의 통합 모니터링을 위한 이동통신용 안테나 설계
유진하 ( Jin Ha Yoo ),조동균 ( Dong Kyun Cho ),이영순 ( Young Soon Lee ) 한국항행학회 2013 韓國航行學會論文誌 Vol.17 No.5
본 논문에서는 보안등의 통합 모니터링과 제어를 위한 3G 이동통신용 RF모듈에 적용 가능한 반파장 폴디드 슬롯 안테나를 제안하였다. 제안된 안테나는 입력임피던스가 50 Ω에 가까운 총 길이가 λg인 전형적인 폴디드 슬롯 안테나의 장점을 유지하면서 절반의 크기를 가지고 PCB의 가장자리에 위치할 수 있도록 변형된 폴디드 슬롯 구조이다. 제안된 안테나는 국내 3G 이동통신 대역용으로, 40.5 × 62 mm2의 기판 중 상단 40.5 × 10 mm2의 공간을 이용하여 설계 및 제작하였다. 제작된 안테나를 측정한 결과, 390 MHz의 대역폭, 2 dBi의 이득을 얻을 수 있었다. In this paper, a half-wavelength folded-slot antenna, which can be applied to RF module for 3G mobile communications by which security lights are monitored and controlled, is proposed. The proposed antenna can be regarded as modified folded-slot structure which has the size reduced to a half of conventional λg folded-slot antenna and can be placed at the ground plane edge. In spite of that, the proposed antenna still maintain the advantage of conventional folded-slot antenna that input impedance is close to 50 Ω. The antenna is designed and fabricated within the upper space of 40.5 × 10 mm2 on 40.5 × 62 mm2 substrate for 3G mobile communication frequency band. The measured impedance bandwidth and antenna gain are 390 MHz and 2 dBi respectively.
Smart GPS 모듈용 슬롯과 결합된 패치안테나 설계
장민규 ( Min Gyu Jang ),이영순 ( Young Soon Lee ),조동균 ( Dong Kyun Cho ) 한국항행학회 2013 韓國航行學會論文誌 Vol.17 No.2
본 논문에서는 L1주파수대역(1.575GHz)을 사용하는 보안등제어기 내장형 무선 모듈에 적용 가능한 PCB(Printed Circuit Board) 인쇄형 GPS안테나를 제안하였다. 제안된 안테나는 삽입형 급전(insertion feeding)을 가지는 마이크로스트립 패치안테나를 기본구조로 하였다. 특히 임피던스 매칭을 위해 윗면에 좌/우 2개의 비대 칭형 슬롯을 삽입하였으며, 아랫면에는 대역폭 증가와 주파수설정을 위하여 한 쪽 끝이 개방된 슬롯과 단락점(shorting point)을 적용하였다. 측정 결과 설계 목표로 한 GPS주파수 L1대역에서 90%의 방사효율과 4.8dBi 이상의 이득을 얻을 수 있었다. In this paper, printed antenna which can be applied to a built-in wireless module of the security controller operating at global positioning system(GPS) L1 frequency band(1.575GHz) is proposed. The proposed antenna is basically composed of a microstrip patch antenna with inserting feed. In particular left and right slots which are respectively asymmetric are used for impedance matching, whereas slot with one open-end and shorting point are used on the bottom plane to set operating frequency and enhance bandwidth. It is observed at the desired GPS L1 frequency band that the radiation efficiency and gain of the proposed antenna are 90% and more than 4.8dBi respectively.
이상현,조동균,유재훈,김남수 청주대학교 산업과학연구소 2002 産業科學硏究 Vol.19 No.2
To design the CDMA2000 receiver, it is one of the difficult products for the receiver system designer to decide various RF parameters because these parameters are directly related to the receiver performance. In this paper, we analyze the relationship between receiver selectivity and sensitivity, which is one of the parameters to decide receiver performance, and FER(Frame Error Rate). Therefore the theoretical backgrounds are established. And as a practical example, the CDMA2000 mobile receiver selectivity was designed to satisfy the CDMA2000 which is specified the minimum recommendation for CDMA2000 mobile station.
다중사용자 환경에서 셀 로딩이 고려된 소프트 핸드오프 분석
김경민,조동균,김남수 청주대학교 산업과학연구소 2000 産業科學硏究 Vol.17 No.2
In this paper, we proposed a handoff decision method based on signal-to-interference ratio of the pilot channel in order to perform a handoff more effectively and to complement disadvantages-deterioration quality of a call, decreasing capacity of the system, and wasting power of the mobile station - which is caused when handoff is performed by the classical method that execute a handoff based on received signal strength. Moreover, when we change that the minimum threshold, the cell loading which is defined active traffic channels to total traffic channels ratio, and the fraction of the transmit power from base station allocated to the pilot channel on the forward link of a DS-CDMA system, we analyzed mean numbers of handoff depending on hysteresis level during the mobile station moving from one base station to another base station.
이민주,조동균,김남수 청주대학교 산업과학연구소 2000 産業科學硏究 Vol.17 No.2
Phase noise in RF Local Oscillator is very important. This increases bit error rate and the bit SNR requied at the receiver of DS-CDMA system. Therefore, the increase directly results in an increase in the transmit power required of the mobiles which in turn degrades the overall network capacity. This paper analyzed DS-CDMA system with phase noise, for the exact analysis, used Lesson'model and non-linear method. We determined the upper bound of RF Local Oscillator with phase noise for DS-CDMA system. Also phase noise reduced the advantage of diversity for overcoming the multi path fading.