http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Basalt 섬유와 상용 코팅제(ONESHOT-TAN)로 보강된 콘크리트 휨 부재의 구조성능 평가
조돈우 ( Cho Don-woo ),김가람 ( Kim Ga-ram ),이경복 ( Lee Gyeong-bok ),촌분텡 ( Chhorn Buntheng ),정우영 ( Jung Woo-young ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.2
콘크리트 구조물은 시간이 지남에 따라 다양한 원인에 의해 성능이 저하된다. 국내 수많은 구조물들은 1970년대에 급속히 건설되어 현재 노후구조물로서 성능이 저하되어 이에 따른 안정성 문제에 관심과 우려가 발생하고 있다. 이에 따른 성능이 저하된 구조물에 대하여 FRP를 활용한 보강 공법은 구조적인 단점과 경제적인 단점 등 부정적인 요인이 존재하여 현재 새로운 건설소재 및 보강공법 개발의 필요성이 증가하고 있다. 본 연구에서는 우레탄계 코팅제를 적용하여 2mm이하 현무암 단섬유를 함침, 새로운 보강방법을 연구하였으며 이들 보강공법의 휨 성능개선에 대하여 실험을 통해 평가하였다.
균열보수 주입재 적용에 따른 BFRP-콘크리트 계면의 인발 부착강도 성능 평가
조돈우 ( Cho Don Woo ),김가람 ( Kim Ga Ram ),정우영 ( Jung Woo Young ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.1
In this study, an experimental evaluation was made on the change of the pull - out performance of BFRP concrete interface after repairing cracks on the lower surface of reinforced concrete by using basalt fiber which is environment friendly and heat - resistant compared to glass fiber. The test standard was ASTM D7522 / D7522M, and the influence factor was considered as the crack thickness. Test results showed that the fracture pattern was the same regardless of the crack thickness and the bond stress was measured similarly.
곽용주 ( Kwak Yong Ju ),조돈우 ( Cho Don Woo ),이상문 ( Lee Sang Moon ),심비리야붓 ( Sim Viriyavudh ),정우영 ( Jung Woo Young ) 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.22 No.1
In this paper, laboratory tensile tests were performed for the basalt, glass and carbon fiber reinforced polymer. Epoxy resin was used as the polymer for this composite material. The procedure of the experiment was based on the criteria specified in ASTM D3039 / 3039M. Moreover, a Universal Testing Machine (UTM) with 100 kN capacity was used in this experiment. Results of the performance of each composite material were analyzed. In case of fiber type, carbon fiber reinforced polymer showed the best performance; followed by basalt fiber and glass fiber reinforced polymer with the elastic modulus of 37.03 MPa and 33.10 MPa, respectively.