http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김성수 ( Kim Seongsoo ),조태준 ( Cho Taejun ),이정배 ( Lee Jeongbae ),박광필 ( Park Kwangpil ),조남영 ( Cho Namyoung ) 한국구조물진단유지관리공학회 2009 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.13 No.2
This study measured compressive strength, Setting Time and fluidity up to 364 days to compare the physical performance of Fine Fly Ash(FFA), Mortar mixed with 15% Fly Ash(FA) and Original Potland Cement. From the result, FFA showed a high compressive strength After 3 days, and FA showed a high compressive strength After 28 days than Original Potland Cement. Fly-Ash have characters about the micro-charging effects by powder and promote long term strength by the Pozzolan reaction. So It means that The more Fly-Ash become fine, the more reaction is promoted.
김성수(Kim, Seongsoo),조태준(Cho, Taejun),이정배(Lee, Jeongbae),박광필(Park, Kwangpil),조남영(Cho, Namyoung) 한국구조물진단유지관리학회 2009 한국구조물진단학회 학술발표회논문집 Vol.2009 No.2
This study measured compressive strength, Setting Time and fluidity up to 364 days to compare the physical performance of Fine Fly Ash(FFA), Mortar mixed with 15% Fly Ash(FA) and Original Potland Cement. From the result, FFA showed a high compressive strength After 3 days, and FA showed a high compressive strength After 28 days than Original Potland Cement. Fly-Ash have characters about the micro-charging effects by powder and promote long term strength by the Pozzolan reaction. So It means that The more Fly-Ash become fine, the more reaction is promoted
황세준(Sejoon Hwang),박원규(Warngyu Park),김철(Chul Kim),오세욱(Sewook Oh),조남영(Namyoung Cho) 한국유체기계학회 2006 유체기계 연구개발 발표회 논문집 Vol.- No.-
In sheet metal forming process using press and draw die some defect can be made because of the high pressure of air pocket between draw die and the product. The purpose of this study is to develop a program to decide an optimal combination of air vent hole size and number to prevent those defect on product. The air inside air pocket is considered as ideal gas and the compression and expansion is assumed as isentropic process. The mass flow is computed in two flow condition: unchocked and chocked condition. The present computation obtains required cross-sectional area of air vent hole for not exceeding the user specified pressure such as the pressure for yielding strength of the product or the pressure for unchocked flow. To validate the program the present results are compared with the results of other researchers and commercial CFD code.