http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
향운(香雲) 정태혁 박사의 학문과 실천 -배우며 생각하며 수행하며 전념한 후학 양성-
정승석 ( Seung Suk Jung ) 인도철학회 2014 印度哲學 Vol.0 No.42
향운 정태혁 박사가 후학을 위해 개척하거나 개발한 학문적 업적의 특색을 세 방면으로 개괄할 수 있다. 첫째, 불교 연구에서 범어와 서장어를 통해 원전에 의거한 해석을 시도했다. 이것은 한문으로 번역된 2차 자료에만 의지하여 불교를 연구하던 종래의 풍토를 일신한 계기가 되었으며, 이로써 국내 불교학의 신기원을 이루었다. 둘째, 국내의 인도철학 분야를 개척하면서 특히 불교와 인도철학의 비교 연구에 주력하여, 이 같은 학풍을 실질적으로 주도했다. 셋째, 요가를 비롯한 인도 문화에 대한 이해를 토대로 밀교 연구의 새로운 지평을 열었다. 향운은 국내의 불교학계에서는 밀교를 학문적연구 대상으로 심도 있게 고찰한 최초의 학자로 인정된다. 향운의 학문과 삶을 일괄하자면, 그는 중관학을 기점으로 밀교를 섭렵하면서 불교의 이념을 수행으로 실천하는 학문과 삶을 견지해 왔다고 말할 수 있다. 이 과정에서 그는 중도를 요가와 밀교의 수행법으로 실천함으로써 불교의 이상을 실현하고자 노력하였다. The characteristics of Dr. Jung Tae-Hyuk`s scholastic achievements for the future use can be divided into three categories. First, Dr. Jung (whose literary name is Hyangwoon) attempted to translate into Korean primary materials in Buddhist Studies such as Sanskrit and Tibetan texts, which he believed to be the right way to study Buddhism. He opened the door to the new way of Buddhist Studies by publishing the first Buddhist grammar books in Korea such as Standard Sanskrit and Basic Tibetan. His new way of study Buddhism as a momentum made lots of Korean scholars leave the conventional way of studying Buddhism that depended only on Chinese texts and begin to read texts in Sanskrit and Tibetan. It is the impact of Hyangwoon`s pioneering work that young scholars these days consider learning Sanskrit and Tibetan as a necessary and basic step of Buddhist Studies. Secondly, Hyangwoon pioneered the field of Indian philosophy in Korea, especially when he focused on comparative studies between Buddhism and Indian philosophy. Under his substantial leadership, Dongguk University formed the department of Indian Philosophy in order to pro mote Buddhist Studies with better understanding of Buddhism in relation to Indian Philosophy that provided cultural soil for Buddhism. Through his comparative studies Hyangwoon gave a lead in attaining the purpose of the department. Lastly, Hyangwoon opened up new horizons in studying Tantric Buddhism (Vajrayana) with his full understanding of Indian cultures. Because Tantric Buddhism is integrated with the elements of Hindu culture, it is a prerequisite for Tantric studies to fully understand Hinduism. Due to their lack of sufficient understanding of Hinduism, few scholars in Korea had been exploring Tantric Buddhism until Hyangwoon discovered the core of Mahayana Buddhism in Tantric Buddhism and applied his energy to reveal the original significance of Tantric Buddhism in both theory and practice. Therefore, we can call him the founding father of Tantric studies in Korea. To sum up Hyangwoon`s life and work, it can be said that his scholastic projects started from studying the Madhyamika and ranged over an extensive literature of Tantric Buddhism, so as to carry the principles of Buddhism into practice. In his lifetime, he endeavored to realize the ideal of Buddhism by following the Middle Way with his practice of Yoga and Tantric practices. The Middle Way that Hyangwoon incessantly drew attention to means the way of life to actually practice one`s recognition of the Sunyata(Emptiness) in order to achieve realization. He believed Yoga and Tantric practices to provide dynamics for one`s practice of the Middle Way. In Hyangwoon`s philosophy, therefore, Yoga and Tantric practices were the most affirmative methods for the path of the Middle Way.
차량동역학 해석을 통한 무인차량의 DR항법에 관한 연구
정승권(Seungkwon Jung),박명욱(Myungwook Park),장재훈(Jaehoon Jang),김정하(Jungha Kim) 한국자동차공학회 2009 한국자동차공학회 학술대회 및 전시회 Vol.2009 No.11
This research proposes a navigation algorithm with DR through vehicle’s dynamic analysis. GPS system sometimes lose their signals and receive inaccurate position data due to many factors, such as obstructions. This paper shows that GPS failure can be solved by using a DR navigation method with encoders and that position errors can be decreased by using RTK_GPS units. In addition to this method, steer angle can be calculated by single track model.
정승권(Seungkwon Jung) 한국자동차공학회 2011 한국자동차공학회 학술대회 및 전시회 Vol.2011 No.11
Recently driver assist system has a tendency to use the technology of sensors for pre-safety. Blind Spot Detection(BSD) system is one of that. BSD system uses two radar sensors installed in rear bumper. It warns a driver when a vehicle is closing to blind spot zone. But it has the performance limitation in some cases such as close overtaking with lane change the ego lane of subject vehicle to the next lane. A vehicle collision can happen because of the warning delay time in BSD system. The performance limitation in BSD system is found out by vehicle test in this paper and the way to improvement is presented.
LED 조명에 의한 색채 및 실내 조명환경 평가 실험실 구축
정승균(Seung-Gyun Jung),김현지(Hyun-Ji Kim),김훈(Hoon Kim) 한국조명·전기설비학회 2009 한국조명·전기설비학회 학술대회논문집 Vol.2009 No.5월
LED 광원의 광학적 성능이 발전함에 따라 광원으로서의 광학효율이 기존 광원을 대체할 정도의 수준을 만족하고 있으며, 이에 의해 실내 조명광원으로서 활용도가 점차 증가하고 있다. 하지만, LED 광원의 경우 기존 광원과는 판이한 분광분포를 가지고 있으며, 소형 광원의 군집체로서 조명기구를 형성하기 때문에 이를 이용하는 사용자들에게 이전의 조명기구와는 크게 다른 느낌, 분위기 등을 가질 수가 있다. 본 연구에서는 기존광원과 LED 광원과의 차이점을 분석하고 이러한 차이점 즉, 분광분포 및 조명 기구의 구성 형태 등에 따른 피험자들이 느끼는 색 편차, 조명 분위기의 변화 등을 평가 시험할 수 있는 실험실의 구성안을 제시하였다.
정승광(Seung-Kwang Jung),전혜인(Hye-In Jeon),신병철(Byung-Chul Shin) 대한CT영상기술학회 2020 대한CT영상기술학회지 Vol.22 No.2
목적: 본 연구는 두 개 내 동맥의 CT(Brain CT Angiography) 검사 후 감산 기법과 자동 뼈 제거 기법을 비교하여 영상의 진단적 차이에 대해 알아보고자 한다. 대상 및 방법: 3D 영상처리를 하기 위한 영상을 얻기 위해 256-slice CT를 사용하여 Brain CT Angiography를 검사한 30명의 영상을 이용하였다. 조영제 주입 전 영상과 조영제 주입 후 영상을 3D 영상 처리 장비 SyngoVia와 ISP에 전송하고, 각각 자체기능인 감산기법과 자동 뼈 제거기법을 이용하여 뼈를 제거하여 두 영상을 리커트 척도로 평가 하였다. 결과: SingoVia의 감산 기법을 이용한 영상이 총 평균 2.94점, ISP의 자동 뼈 제거 기법을 이용한 영상이 총 평균 2.57점으로 평가되었고, 최대강도투사에서 SyngoVia는 총 평균 2.93점, ISP는 총 평균 2.56점으로 평가되었다. 결론: CT검사 후 데이터를 이용하여 3D 영상 처리를 함에 있어 CT number값을 이용하여 조영 전 영상과 조영 후 영상을 적용하는 감산 기능을 이용하는 SyngoVia의 사용이 보다 유용한 영상을 표현해내는 것으로 나타났다. Purpose: The purpose of this study is to conduct CT scanning for intracranial artery and compare between subtraction technique and automatic bone removal technique to find out their diagnostic differences. Materials and Method: In order to acquire images for 3D processing, 256-slice brilliance iCT elite was used to generate brain CT angiography images from 30 patients.Pr e-images and post-images were sent to SyngoVia and ISP for 3D visualization, and each system used both subtraction and automatic bone removal techniques to remove the bones from the images.W e compared to image quality by Likert scale. Result: The total average scores of the created images were: 2.94 for the image from SingoVia’s subtraction technique, and 2.574 for the image from ISP’s automatic bone removal technique.T he total average scores from the maximum intensity projection were 2.93 for SyngoVia and 2.56 for ISP. This implies that 3D visualization of a source image which uses images with same parameters may result in imaging variations depending on what kind of 3D workstation is used.I t was not easy to remove the bones that are located close to blood vessels using ISP’s automatic bone removal technique and vessel loss was observed from some of the images. On the other hand, bones were easily removed with little vessel loss using SyngoVia’s subtraction technique. Conclusion: For 3D visualization of post-CT data, it was demonstrated that image expressions were more useful when created by SyngoVia’s subtraction technique using the CT number value to apply pre/post-images.