http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유한요소법에 의한 직교이방성 Box 형 박판기둥의 국부좌굴
정상균(Sang Kyoon Jeong),채수하(Soo Ha Chae),윤순종(Soon Jong Yoon) 한국강구조학회 1997 韓國鋼構造學會誌 Vol.9 No.3
Local buckling analysis of orthotropic thin-walled box section columns is performed by the finite element method (FEM). In the FEM analysis GTSTRUDL SBHQ6 element is utilized. The SBHQ6 element can account for the membrance force and plate bending effects. FEM results were compared with derived closed-form solution and the difference between the results were in the range of 4.2∼12.8%
유리섬유 보강 플래스틱 Re-Bar 다발로 보강된 1방향 콘크리트 슬래브의 휨거동에 관한 실험적 연구
윤순종 ( Soon Jong Yoon ),김병석 ( Byung Suk Kim ),유성근 ( Sung Kun You ),정재호 ( Jae Ho Jung ),정상균 ( Sang Kyoon Jeong ) 한국복합재료학회 2003 Composites research Vol.16 No.3
최근 철근의 부식과 관련된 철근콘크리트 바닥판의 내구성에 대한 문제점이 증가되면서 부식에 대한 저항성이 크며, 기존 구조용 재료에 비해 여러 가지 물리적, 역학적 장점을 가진 섬유보강플래스틱을 사용한 보강재의 사용성이 증가되고 있다. 본 연구는 GFRP Re-Bar 다발로 1방향 슬래브의 휩거동에 관한 실험적 연구로서, 국내에서 개발된 GFRP Re-bar의 인장시험을 수행하였으며, GFRP Re-Bar의 보강량을 증가시켜가며 단위 폭을 갖는 1방향 슬래브 실험제를 제작하고 3등분점 재하실험을 수행하였다. 각 실험체에 대한 이론적인 해식은 철근콘크리트 휨부재의 해석 및 설계 방법을 수정, 보완하여 개발된 ACI Committee 440에 따라 수행하였으며, 실험결과와 비교적 잘 일치함을 알 수 있었으며, FRP Re-Bar로 보강된 콘크리트 바닥판의 설계규준을 확립하기 위해서는 강도에 대한 한계상태뿐만 아니라 처짐 등 사용성에 대한 한계상태가 결정되어야 할 것이라 생각된다. In recent years, the investigation on the development of fiber reinforced plastic(FRP) Re-Bar has been greatly increased due to the attractive physical and mechanical properties of FRP. The primary reason of such a tendency is in the fact that it does not ordinarily cause durability problems such as those associated with steel reinforcement corrosion. This study is an experimental investigation on the flexural behavior of one-way concrete slabs, which can be used to construct bridge deck, reinforced with GFRP Re-Bar bundle. The tensile tests of GFRP Re-Bar produced by domestic industry and third point bending tests of one-way slab specimens reinforced with GFRP Re-Bar bundle are performed. For all slab specimens, load-deflection relations are predicted by using the ACI committee 440 and the results are compared with experimental ones. In order to establish the design criteria or guidelines of concrete flexural member reinforced with FRP Re-Bar, it is needed to evaluate the serviceability limit state as well as the strength limit state.
직교이방성 판이론에 의한 FRP 보강 콘크리트 슬래브의 휨해석
손경욱 ( Kyong Wook Son ),정재호 ( Jae Ho Jung ),정상균 ( Sang Kyoon Jeong ),윤순종 ( Soon Jong Yoon ),이승식 ( Seung Sik Lee ) 한국복합재료학회 2004 Composites research Vol.17 No.2
본 연구는 FRP 보강 콘크리트 슬래브의 휨거동에 관한 이론적 연구로서 FRP 보강 콘크리트 슬래브를 구조적 직교 이방성판으로 간주하고 고전적 직교이방성판이론에 따른 휨해석 및 유한요소해석을 수행하였다. FRP 보강 콘크리트 슬래브를 직교이방성판으로 모델링하기 위해서는 각 하중단계별로 실제 구조물의 거동에 부합하는 직교이방성판의 휨강성을 결정하는 것이 중요하다. 본 연구에서는 탄성등가법을 적용하여 FRP 보강 콘크리트 슬래브와 등가인 직교이방성판의 휨강성을 결정하였으며, 탄성등가법에 의해 결정된 휨강성을 사용하여 유한요소해석 수행을 위한 강성행렬의 결정방법을 제안하였다. 또한, 이론식에 의한 해석결과와 제안된 강성행렬을 사용하여 해석한 유한요소해석 결과를 실험 결과와 비교하였다. In this study, analytical investigations on the flexural behavior of FRP reinforced concrete slab were discussed. In the derivation of analytic solution, the FRP reinforced concrete slab was modeled as a structural orthotropic plate. To determine the flexural rigidities of an orthotropic plate model, the elastic equivalence method was employed. In the finite element analysis, the approximate method to determine the rigidity matrix of orthotropic plate element was also suggested using the elastic equivalence method. The results obtained by the analytical solution and the finite element analysis were compared with that of experiment.