http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
구제수술에서 일측 복장뼈자루 절제를 통한 전종격동 기관절개술의 1례
전석원(Seok Won Jeon),김창회(Chang Hoi Kim),이해영(Hae Young Lee),김성원(Sung Won Kim) 대한두경부종양학회 2016 대한두경부 종양학회지 Vol.32 No.2
A 65-year-old male visited hospital in the state of tracheostomal recurrence 1 year after total pharyngolaryngectomy. Extensive recurrence around stoma or paratracheal, superior mediastinal area is challenging in treatment, especially in securing airway. We performed mediastinal tracheotomy through resection of unilateral manubrium, some part of sternal side of clavicle and 1st rib as the salvage operation for recurrent laryngeal cancer. This procedure could be risky, thus very careful patient selection is required because of a tortuous postoperative course. We would like to present the case that anterior mediastinal tracheostomy could be needed as appropriate palliative means of airway construction in the patients with recurrent laryngeal cancer with lower neck extension with literature review.
서울 중심부 편마암 분포지역 저심도 구간의 암반 초기응력 분포특성 연구
배성호,전석원,최용근,김재민,Bae, Seong-ho,Jeon, Seok-won,Choi, Yong-Kun,Kim, Jae-min 한국터널지하공간학회 2003 터널기술 Vol.5 No.2
90년대 이후 지하 암반 구조물의 수요가 증가함에 따라 시공 전 설계 단계에서 요구되는 암반내 초기응력에 대한 정량적 정보를 얻기 위해 현장 초기 응력 측정이 광범위하게 수행되고 있다. 제안된 여러 측정법들 중 현장 적용성 면에서 큰 장점을 가진 수압파쇄법이 국내에서는 대표적으로 적용되고 있다. 본 논문에서는 평탄한 지형조건으로 이루어진 서울 중심부 편마암 지역내 저심도 구간의 11개 시추공을 대상으로 수압파쇄법에 의해 구해진 초기응력 측정자료와 수평응력의 크기, 방향성과 심도별 변화 그리고 측압계수 분포 등 과업구간 암반 내 초기응력장의 제반 분포 특성에 대해 논의하고자 한다. Since early in the 90's, as the need for construction of underground rock structures has been largely increased, the in-situ rock stress measurement has been widely carried out to provide the quantitative information on the initial stress state of test site at the design stage of underground rock structures. Among the diverse method developed for measuring rock stress, hydraulic fracturing method is most popularly used because it is applicable at pre-construction stage and has no limit in testing depth. In this paper a study on initial rock stress state at shallow depth of the plain gneiss region in the central part of Seoul was performed on the basis of the in-situ hydraulic fracturing stress measurement results from the 11 test boreholes. And overall characteristics of the initial stress field of the study area are discussed.
박도현,전석원,Park, Do-hyun,Jeon, Seok-won 한국터널지하공간학회 2000 터널기술 Vol.2 No.2
암석은 지질학적 생성과정으로 인해 잠재적으로 많은 구조적 결함을 내포하고 있는 재료이다. 이러한 구조적 결함으로 인해 압축하중을 받고 있는 암석의 변형거동 및 파괴는 비선형적이다. 지금까지의 연구들에서는 암석의 비선형 거동을 모사하기 위해 균열모형, 즉 활주균열모형 (Sliding crack model) 과 전단균열모형 (Shear crack model) 을 사용하였다. 이 연구들에서는 암석의 비선형 응력-변형률 곡선과 균열성장으로 인해 발생되는 유효탄성정수들 ($E_1$, $E_2$, ${\nu}_1$, ${\nu}_2$, $G_2$) 의 변화와 같은 여러 가지 암석 거동을 모사하였다 (Kemeny, 1993; Jeon, 1996, 1998). 대부분의 이러한 연구들은 주로 균열모형의 암석거동의 적용에 대한 타당성을 검증하는데 그쳤으며 지하공간이나 사면설계 등의 실제적인 수치해석을 목적으로 균열모형을 적용한 연구는 그다지 많지 않다. 본 연구에서는 암석의 비선형 응력 변형률 곡선을 모사함으로써 균열모형의 암석에의 적용에 대한 타당성을 검증하며 실제적인 수치해석, 즉 상용되고 있는 유한요소해석 프로그램에 균열모형을 적용하였다. Rock is a very complex and heterogeneous material, containing structural flaws due to geologic generation process. Because of those structural flaws, deformation and failure of rock when subjected to differential compressive stresses is non-linear. To simulate the non-linear behavior of rock, mechanical crack models, that is, sliding and shear crack models have been used in several studies. In those studies, non-linear stress-strain curves and various behaviors of rock including the changes of effective elastic moduli ($E_1$, $E_2$, ${\nu}_1$, ${\nu}_2$, $G_2$) due to crack growth were simulated (Kemeny, 1993; Jeon, 1996, 1998). Most of the studies have mainly focused on the verification of the mechanical crack model with relatively less attempt to apply it to practical purposes such as numerical analysis for underground and/or slope design. In this study, the validity of mechanical crack model was checked out by simulating the non-linear behavior of rock and consequently it was applied to a practical numerical analysis, finite element analysis commonly used.
박배한,전석원,김양균,Park, Pae-Han,Jeon, Seok-Won,Kim, Yang-Kyun 한국터널지하공간학회 2001 터널기술 Vol.3 No.1
AE와 DRA를 이용한 초기응력 측정법은 실험실 시험을 통해 초기응력을 측정하는 방법 중의 하나이다. 이 방법은 시추와 실험실 시험간에 지연시간이 발생하며 시료에 축방향 반복하중을 가하여 초기응력을 결정하기 때문에 지하 암반의 응력 상태와는 다른 결과를 얻을 수도 있다. 이 연구에서는 지연시간을 다르게 하여 지연시간이 선행응력 결정에 미치는 영향을 살펴보았다. 그리고 축방향 선행응력만을 가한 시료와 축방향 선행응력과 봉압을 모두 가한 시료에 대해 AE와 DRA를 이용하여 선행응력을 결정하여 봉압이 축방향 선행응력 결정에 미치는 영향을 살펴보았다. 지연시간이 길어질수록 오차가 약간씩 증가하는 경향이 나타났으나 지연시간이 1개월인 시료라 할지라도 AE와 DRA를 이용한 경우 각각 16%와 12%의 오차범위 내에서 선행응력을 결정할 수 있었다. 축방향 선행응력만을 가한 경우 AE를 이용하면 9%, DRA를 이용하면 4%의 오차범위 내에서 축방향 선행응력을 결정할 수 있었으나 축방향 선행응력과 봉압을 모두 가한 경우는 각각 17%와 14%의 오차범위 내에서 축방향 선행응력을 결정할 수 있었다. 터널현장에서 시추한 코어를 이용하여 초기응력을 측정한 결과 AE와 DRA는 유사한 결과를 나타내었으나 수압파쇄법에 의한 결과보다는 작은 값을 갖는 것으로 나타났다. In-situ stress measurement using AE (Acoustic Emission) and DRA (Deformation Rate Analysis) is usually carried out under uniaxial loading in the laboratory and it consumes delay time from drilling to testing. Therefore, it should be considered how the lateral stress and delay time influence on the test results for the in-situ stress determination. As the delay time increased, the accuracy of estimating the pre-stress decreased. The pre-stress of the specimen loaded only axially was determined within an error of less than 9% (using AE) and 4% (using DRA). And the specimen on which axial pre-stress and the confining pressure were loaded had an error of less than 17% (using AE) and 14% (using DRA). The results of AE and DRA for field specimens were very similar with each other but smaller than those of hydraulic fracturing method.