http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전병희(Byoung-Hee Jeon),양명석(Myoung-Seog Yang),이현승(Hyun-SeungLee),이영신(Young-Shin Lee) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
This paper describes the static test results of SmartUAV's Rear-Spar structures. Test sequences are design limit load test, design ultimate load test and design fracture load test. Test results are verified to static strength of SmartUAV's Rear-spar. Rear-spar structures are fractured on 158% design load during design fracture load test.
전병희(Byoung-Hee Jeon),강휘원(Hui-Won Kang),이정진(Jung-Jin Lee),이영신(Young-Shin Lee) 한국항공우주학회 2010 韓國航空宇宙學會誌 Vol.38 No.5
본 논문에서는 스마트 무인기의 자유 진동 특성 및 로터의 회전으로 인한 기체 구조물의 진동특성 즉 강제진동 특성을 실험적으로 규명하기 위해 수행한 시험방법, 센서 및 장비 설치, 시험 결과 검증 방법 및 시험결과를 수록하였다. 스마트 무인기의 지지 조건은 번지코드를 이용하여 자유-자유 경계조건을 구현하였고, 시험은 3개의 가진기를 사용하여 다점 랜덤 가진법으로 구조물을 가진하였으며 약 100여개의 가속도계로부터 기체 구조물의 응답특성을 측정하였다. 주파수 응답함수를 통하여 다기준 최소 자승 복소지수법을 적용하여 고유 진동수, 감쇠율, 모드 형상등의 모달 매개변수를 산출하였다. 또한 강제 진동시험은 스마트 무인기의 양쪽 로터가 장착되는 나셀 부위에 x,y,z 각 방향으로 가진기를 장착하여 로터 회전 주파수를 가진함으로써 구조물과 각종 장비의 진동응답 특성을 측정하였다. This paper describes the test procedure, instrumentation, verification methodology and the results of the ground vibration test(GVT) and force vibration test(FVT) of the SmartUAV aircraft to estimate experimentally dynamic characteristics of the aircraft. Bungee cords are used to emulate free-free boundary conditions of the test aircraft. The SmartUAV is excited by three shakers and one-hundred frequency response functions(FRF's) is measured. The FRF's are reduced and analyzed to identify the dynamics parameters of the SmartUAV. To extract modal parameters of the SmartUAV such as, natural frequencies and damping ratios, the poly-reference least square complex exponential method is used in the time domain. The mode shape coefficients are estimated with the least squares frequency domain method to identify the vibration modes. The FVT was performed by fixed sine frequency with three shakers on the x, y and z direction and vibration characteristics of structures and detail equipments are measured.
균일 열부가 하중을 받는 사각판의 자유 진동특성 연구 : Part Ⅱ. 고유진동 실험
전병희(Byoung-Hee Jeon),강휘원(Hui-Won Kang),이영신(Young-Shin Lee) 한국항공우주학회 2011 韓國航空宇宙學會誌 Vol.39 No.2
본 논문에서는 균일 열부가 하중을 받는 사각판의 자유 진동특성을 실험을 통하여 연구하였다. 사각판의 재질은 알루미늄, 강재 및 스테인레스 강이고 사각판의 재원은 0.1 × 0.1 × 0.002 m 이다. 열부가 하중을 위해 적외선 석영 램프를 사용하였고, 전력조절을 위해 PCS(Power Control System)을 사용하였으며, 주파수 함수를 얻기 위해 비접촉식 진동 측정 장비를 사용하였다. 부가한 온도 조건은 상온에서부터 300 ℃까지 50 ℃간격으로 부가하였다. 경계조건은 번지코드를 사용하여 자유-자유 조건을 구현하였다. 사각판의 전면 전체를 균일하게 가열하였다. This paper was conducted on experimental analysis in the free vibration analysis of rectangular plates under uniform thermal loading. Materials of three rectangular plates were aluminum, steel and stainless-steel respectively. The dimension of rectangular plates was 0.1 × 0.1 × 0.002 m. Infrared quartz lamps were used for thermal loading. The PCS(Power Control System) electric control system was applied for control and scanning vibrometer (Poly Tech) was used for acquisition of frequency response function. Applied temperature was increased from room temperature to 300 ℃ by 50 ℃. Boundary condition was free-free condition using bungee cord. Front face of rectangular plate was heated uniformly.