http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
화염분무열분해법에 의한 SrTiO3:Al, Pr 형광입자의 직접 합성 및 형광강도 최적화에 관한 연구
장한권,장희동 한국화학공학회 2007 화학공학의이론과응용 Vol.10 No.2
형광체 입자는 정보표시를 위한 디스플레이의 성능에 있어서 직접적으로 관련되는 중요한 재료이다. 이 중 SrTiO3:Al, Pr(STO:Al, Pr)는 적색 발광 형광체로서 FED(Field Emission Display)용으로 주목 받고 있다. 본 연구에서는 화염분무열분해법을 이용하여 형광입자의 제조공정에서 발광특성 향상을 위한 열처리 후공정이 필요없는 구형 STO:Al, Pr 형광체 입자를 직접 합성하고 형광체 입자의 고휘도를 위한 최적 화염조건 및 최적 dopant 농도에 관한 연구를 수행하였다. 합성된 STO:Al, Pr 형광체 입자는 고상법으로 합성된 입자에 비해 비응집체의 구형 형상을 지니며 균일한 입도분포를 보였으며 XRD 패턴은 화염조건에 상관없이 입방형의 perovskite구조를 나타내었다. 메탄 1.0 l/min와 산소 2.11 l/min (등가비 0.95)에서 가장 좋은 결정성을 보였으며 Scherrer식에 의해 결정된 평균 결정크기는 43 ~ 57 nm로서, 비록 화염내에서의 체류시간이 짧을지라도 결정성장에 충분함을 보였다. Dopant농도에 따른 형광강도 최적화에 관한 연구를 위해 Pr/Sr 및 Al/Sr 비를 각각 0.0005 ~ 0.004, 0.01 ~ 0.3 범위에서 변화시켰을 때 최대 형강강도는 Pr/Sr 및 Al/Sr비가 각각 0.001과 0.03에서 관측되었다. 이 조건에서 LiNO3를 30 ~ 60 mol% 첨가하여 Li flux의 영향을 관측한 결과, LiNO3를40 mol% 첨가시 최대 형광강도를 나타내었다. 이는 고상법으로 합성된 STO:Al, Pr 형강강도의 약 110% 정도에 해당한다.
이산화티타늄 나노분말의 화염합성 및 메틸렌블루 분해 특성
장한권,장희동,길대섭,조국,박진호 한국자원공학회 2007 한국자원공학회지 Vol.44 No.6
Titanium dioxide (TiO2) nanoparticles consisted of spherical primary nanoparticles were synthesized from titanium tetraisopropoxide (TTIP) by flame spray pyrolysis. The effect of precursor molar concentration on the powder properties such as morphology, specific surface area, crystal structure, and absorption of ultraviolet-visible rays was investigated. As the precursor concentration increased from 0.1 M to 1.0 M, the specific surface area decreased from 126 m2/g to 25 m2/g, corresponding average particle diameter increased 12 nm to 60 nm, and the mass fraction of rutile in the TiO2 particles increased from 0% to 33%. Photocatalytic property of as-prepared TiO2 nanoparticles was also investigated by measuring the degree of color-removal of methylene blue under the irradiation of ultraviolet ray. By the photocatalysis of TiO2 nanoparticles prepared at 1.0 M of TTIP concentration, 96% of the methylene blue was degraded during 1 hr. 화염분무열분해법을 이용하여 titanium tetraisopropoxide(TTIP) 용액으로부터 구형의 기본입자로 구성된 이산화티타늄 나노분말을 합성하였다. 전구체 몰농도가 분말의 형상, 비표면적, 결정구조 및 자외선 흡수와 같은 분말특성에 미치는 영향을 고찰하였다. 전구체 몰농도가 0.1 M에서 1.0 M로 증가함에 따라, 비표면적은 126 m2/g에서 25 m2/g으로 감소하였고 이에 해당하는 평균입경은 12 nm에서 60 nm로 증가하였다. 그리고 TiO2 분말 중 rutile 결정상의 함량은 0%에서 33%로 증가하였다. 자외선 조사 하에서 메틸렌 블루의 색 제거율을 측정함으로써 합성된 TiO2 나노분말의 광촉매 특성을 조사하였다. 1.0 M의 TTIP 농도에서 합성된 TiO2 나노분말의 경우 광촉매 반응을 통하여 1시간 동안에 96%의 메틸렌 블루를 분해하였다.
화염분무열분해법을 이용한 TiO<sub>2</sub>:Fe,V 나노분말의 제조 및 VOCs 분해 특성
장한권,장희동,김태오,김선경,최진훈,Chang, Han Kwon,Jang, Hee Dong,Kim, Tae-Oh,Kim, Sun Kyung,Choi, Jin Hoon 한국입자에어로졸학회 2009 Particle and Aerosol Research Vol.5 No.1
Fe- and V-doped titanium dioxide nanoparticles consisting of spherical primary nanoparticles were synthesized from a mixed liquid precursor by using the flame spray pyrolysis. The effects of dopant concentration on the powder properties such as morphology, crystal structure, and light adsorption were analyzed by TEM, XRD, and UV-Vis spectrophotometer, respectively. As the V/Ti molar ratio increased, pure anatase particles were synthesized. On the contrary, rutile phase particles were synthesized as the Fe/Ti ratio increased. Photocatalytic property of as-prepared $TiO_2:Fe,V$ nanoparticles was investigated by measuring the removal efficiency for volatile organic compounds (VOCs) under the irradiation of visible light. After 2 hrs under visible light, the removal efficiencies of benzene, p-xylene, ethylbenzene, and toluene were reached to 21.9%, 21.4%, 19.8% and 17.6% respectively.
규산 수용액으로부터 분무열분해법에 의한 기공 특성이 제어된 메조기공의 다공성 실리카 분말 합성
장한권,장희동,이진우,오경준,길대섭,최정우 한국입자에어로졸학회 2012 Particle and Aerosol Research Vol.8 No.2
Spherical mesoporous silica particles, of which main pore diameter was 3.8 ㎚, were successfully prepared by spray pyrolysis from aqueous silicic acid. The effect of precursor concentration, reaction temperature, and the addition of urea and PEG on the particle diameter and pore properties such as pore diameter, total pore volume, and specific surface area were investigated by using FE-SEM, particle size analyzer, and nitrogen absorption-desorption analysis. With an increase of the precursor concentration from 0.2 M to 0.7 M, the average particle diameter, total pore volume, and specific surface area of the porous silica particles increased from 0.56 to 0.96 ㎛, 0.434 to 0.486 ㎤/g,467.8 to 610.4 ㎡/g, respectively. Within the temperature range (600 ℃ ~ 800 ℃), there was no significant difference in the pore diameter, total pore volume, and specific surface area. In addition, the addition of urea as an expansion aid led to slight increases in particle diameter, pore diameter, and specific surface area. However, when the polyethylene glycol (PEG) as an organic template was used, the total pore volume of porous particles increased dramatically.