RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        표적 특성에 따른 모노펄스 레이더 불확도 연구

        장용식,류충호,김환우,Jang, Yong-sik,Ryu, Chung-ho,Kim, Whan-woo 한국정보통신학회 2017 한국정보통신학회논문지 Vol.21 No.1

        일반적으로 모노펄스 레이더의 오차 수준은 다중경로 간섭, 글린트, 동적 지연오차 등의 환경적 오차 요인이 제거된 이상적인 경우를 가정하고 있다. 따라서 지금까지는 외부 환경적 오차 요인이 포함된 모노펄스 레이더의 계측 불확도를 추정하여 왔다. 본 연구에서는 각기 다른 특성의 표적에 대해서 어떤 종류의 오차 요인이 모노펄스 레이더 계측 불확도 에 영향을 미치는지 살펴보았다. 이를 실험적으로 증명하기 위해서 먼저 환경적 오차 요인이 완벽히 제거된 이상적인 환경에서의 모의 실험 결과를 기술하였다. 이 결과와 함께 지상에 고정된 교정장치, 저속으로 기동하는 교정구, 고속으로 기동하는 비행표적에 대한 불확도를 추정함으로써 오차 요인이 포함된 각기 다른 특성의 표적에 대한 모노펄스 레이더 계측 불확도를 정량적으로 비교 고찰하였다. In general, an error budget of monopulse radar is proposed by manufacturer who assuming that all of external enviromental error resources such as multipath, glint, dynamic lag variation are removed. So until now, a measurement uncertainty of monopulse radar can be discussed including external enviromental error resources. In this paper, it is described that which kinds of error resource can effect on monopulse radar measurement uncertainty for different target property. To prove it experimentally, at first a simulation result is described assuming that all of external enviromental error resources are removed. It only includes receiver thermal noise. And then, monopulse radar measurement uncertainty estimation results tracking on calibration target which is fixed on specific position, calibration sphere which is moving slowly, weapon systems firing test which is moving fast are described quantitativly. All of these targets have different dynamic property.

      • KCI등재

        시선속도 변환과 불확도 전파에 관한 연구

        류충호,황규환,장용식,김문기,최익환,Ryu, Chung-Ho,Hwang, Gyu-Hwan,Jang, Yong-Sik,Kim, Moon-Ki,Choi, Ik-Hwan 한국군사과학기술학회 2013 한국군사과학기술학회지 Vol.16 No.2

        In general, radial velocity of a target can be obtained by acquiring doppler frequency shift in case of a doppler radar, or can be obtained by acquiring range rate in case of a pulse radar. Then radial velocity can be converted to tangential velocity using aspect angle or position variation per unit time. These two ways have the same meaning in physically, but result in different uncertainty finally. In this paper, it is described not only the two transformation procedures to calculate tangential velocity from radar measurement data, but also the result of combined uncertainty comparison between these two procedures.

      • KCI등재

        CW 도플러 레이더의 시각 분해능과 시선 속도 정확도의 관계

        류충호(Chung-Ho Ryu),장용식(Yong-Sik Jang),최익환(Ik-Hwan Choi) 한국전자파학회 2012 한국전자파학회논문지 Vol.23 No.7

        CW 도플러 레이더는 움직이는 물체의 속도에 비례하는 도플러 주파수 편이를 검출함으로써 속도를 계측한다. 도플러 주파수 편이를 검출하기 위해서 시간영역에서 획득한 수신 신호를 주파수 영역으로 변환하기 위한 FFT(Fast Fourier Transform)를 수행한다. 이때 FFT 개수에 의해 도플러 레이더의 시각 분해능이 달라진다. 또한, FFT 개수는 수신 신호의 신호 대 잡음비에도 영향을 미치므로, 결국 시선 속도의 정확도와도 관련 있다. 따라서 본 논문에서는 FFT 개수에 따라 달라지는 시각 분해능과 시선 속도 정확도의 관계를 제시하였다. A CW Doppler radar can measure radial velocity of an object. It detects a Doppler frequency shift that is proportioned to radial velocity of a moving object. To detect a Doppler frequency shift, FFT(Fast Fourier Transform) is conducted. In this process, the time domain received signal is transformed to a frequency domain. A number of FFT affects not only the time resolution but also signal to noise ratio of received signal. So finally it is related with a radial velocity accuracy. Therefore in this paper, it is described the relation of time resolution and the radial velocity accuracy.

      • KCI등재

        포구 속도 측정을 위한 X-band CW 도플러 레이더 개발

        김재헌(Jae-Heon Kim),고영목(Yeong-Mok Koh),남궁성원(Sung-Won Namgung),장용식(Yong-Sik Jang),박용석(Yong-Seok Park),나극환(Keuk-Hwan Ra),최익권(Ik-Kwon Choi) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.5

        본 논문에서는 포구 속도 측정을 위한 X-band CW(Continuous-Wave) 도플러 레이더 구현에 관해 기술하였다. 본 논문에서의 레이더 구성품은 마이크로웨이브 송수신부, 신호 처리부, 전원부이며, 레이더의 운용 및 시험을 위하여 운용/분석 프로그램을 제작하였다. 레이더 송신 주파수는 중심 주파수 f ?에서 ±3 ㎒ step의 5개 채널로 가변되며, 송신 출력은 25 ㏈m이다. 레이더의 최소 유효 수신 전력은 -117 ㏈m이다. 이러한 레이더의 기능은 비행 중인 탄자의 도플러 주파수를 획득하고 정밀 속도 점을 계산하여 최초 포구 이탈 순간의 속도를 추정한다. 레이더의 성능 평가는 현재 화포 시험에 적용되는 기준 장비를 사용하여 155 ㎜ 화포 사격 시험을 통해 삼각대 장착, 포신 장착의 두 가지 방법으로 비교 실시하였다. 기준 장비와의 비교 결과, 동등 성능임을 확인할 수 있었다. In this paper, we described the implementation of the X-Band continuous-wave doppler radar for muzzle velocity measurement. The radar is consisted of microwave transceiver, signal processor, power board, and the measuring program was developed for the operating and field test. The operating frequency of doppler radar is able to set ±3 ㎒ with 5 channel from the center frequency, and the output power is 25 ㏈m. The minimum receiving power is -117 ㏈m. The radar would obtain the doppler frequency from the artillery, and calculate accurate velocity point and then estimate muzzle velocity. The performance test for this radar was done with 155 ㎜ at barrel and tripod mounted, and also compared the performance with the reference radar. As a result, the performance of the our new radar is equal with the reference one.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼