http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고출력 LED 패키지의 열 전달 개선을 위한 금속-실리콘 병렬 접합 구조의 특성 분석
임해동,최봉만,이동진,이승걸,박세근,오범환,Yim, Hae-Dong,Choi, Bong-Man,Lee, Dong-Jin,Lee, Seung-Gol,Park, Se-Geun,O, Beom-Hoan 한국광학회 2013 한국광학회지 Vol.24 No.6
고출력 LED 패키지의 방열 특성 향상을 위하여, 다이 접합부에 실리콘 접착제와 금속 패턴의 병렬 접합 구조를 적용하여 열 유동 해석을 수행하였다. 그 결과, LED 칩에서 발생한 열은 주로 금속 패턴 구조물을 통해 기판으로 효과적으로 전달되고 있으나, 패턴 구조물의 크기에 따라 효율의 차이가 있음을 확인하였고, 그 효과를 정량화하기 위해 정규화 길이를 도입하여 칩과 금속 패턴 구조물의 면적에 따른 열 저항을 비교하였다. 정규화 길이가 길어지면 금속 패턴 구조물에 의한 열 우회 경로가 칩에 고르게 분포하여 열 저항이 감소하였으며, 그 값은 단순 병렬 열 저항 이론 값보다 다소 큰 수치로 수렴하지만, 충분한 열 저항 개선 효과를 얻을 수 있었다. We present the thermal analysis result of die bonding for a high power LED package using a metal hybrid silicone adhesive structure. The simulation structure consists of an LED chip, silicone die adhesive, package substrate, silicone-phosphor encapsulation, Al PCB and a heat-sink. As a result, we demonstrate that the heat generated from the chip is easily dissipated through the metal structure. The thermal resistance of the metal hybrid structure was 1.662 K/W. And the thermal resistance of the total package was 5.91 K/W. This result is comparable to the thermal resistance of a eutectic bonded LED package.
LED 칩 표면 광량 분포 변화에 따른 2단 반사컵의 최적 설계
임해동,이동진,김양겸,정장희,이승걸,오범환,Yim, Hae-Dong,Lee, Dong-Jin,Kim, Yang Gyeom,Jeong, Jang Hee,Lee, Seung-Gol,O, Beom-Hoan 한국광학회 2012 한국광학회지 Vol.23 No.6
배광 분포 제어가 용이한 높이 분할방식 반사컵 설계를 수행함에 있어서, 배광 설계시 배광 분포의 설계오차를 줄이기 위하여, LED 칩 표면상의 광량 분포 변화에 따른 반사컵의 배광 특성 변화 경향성을 파악하여 최적 설계에 적용하였다. LED 패키지의 반사컵을 높이에 따라 2단 분할하여 최적 설계한 결과, 교차형과 비교차형의 조합 설계를 통해서 최대 광도와 균일도를 조절하거나 암흑 영역을 없애는 등 다양한 기능성 설계가 가능했다. It is important to control the beam pattern of an LED by the design of a reflector. The optimum conditions of the structure parameters for the 2 segment LED reflector are analyzed and compared as they vary depending on the various intensity distributions of light output on the LED chip surface. It is also interesting that combining various types of reflectors is possible to give several efficient beam patterns, such as the maximum intensity profile or relatively wide controllability of beam angle.
조명용 LED 반사컵의 설계변수 의존도 분석 및 기능성 설계의 단순화 기법
임해동,이동진,김양겸,오범환,Yim, Hae-Dong,Lee, Dong-Jin,Kim, Yang Gyeom,O, Beom-Hoan 한국광학회 2012 한국광학회지 Vol.23 No.5
본 논문에서는, LED 조명의 배광 특성의 조절이 용이한 반사컵 설계 방법을 제안하였다. 먼저 개별 반사컵의 구조와 높이에 대한 방사각의 변화 경향성을 파악하여, 높이에 따른 반사 특성을 확인하였다. 그 결과, 높이에 따라 반사 각도를 조절하여 설계함으로써 배광 분포의 세밀한 조절이 가능했다. 가장 간단한 2단 분할 방식의 경우 방사각의 제어나 균일도 개선을 할 수 있었다. The design methods of the reflecting cup employed in an LED lamp are presented. The beam patterns of an LED lamp can be adjusted by functional segmentation of the reflector height. Thus, the reflecting angle of slope was designed according to the height. The analysis of the designed reflecting cup shows that precise adjustable beam patterns can be achieved.
높이영상에 산포되어 있는 점 노이즈 처리를 통한 백색광 간섭계의 영상 복원력 향상
임해동,이민우,이승걸,박세근,이일항,오범환,Yim, Hae-Dong,Lee, Min-Woo,Lee, Seung-Gol,Park, Se-Geun,Lee, El-Hang,O, Beom-Hoan 한국광학회 2010 한국광학회지 Vol.21 No.1
본 논문에서는 백색광 주사 간섭계의 측정시 외부 잡음이나 진동에 의한 간섭무늬 신호 왜곡으로 인하여 높이 영상에 발생하는 점 노이즈 제거를 위해, 데이터 처리 과정에서 높이 영상에 잡음 제거 필터를 적용하여 백색광 간섭계의 잡음 제거 성능을 향상시켰다. 백색광 간섭계의 높이 영상에 산포되어 있는 점 노이즈의 제거 방법으로 주로 사용되는 미디안(median) 필터는 점 노이즈 제거에 좋은 성능을 보이지만, 특정 경우 노이즈 제거 성능이 좋지 못하여 본 논문에서는 비교 평균 필터(Comparative Mean filter)를 제안하였다. 비교 평균 필터는 중심 화소 수치와 주변의 화소 수치를 비교하여 노이즈를 판별하고, 노이즈를 참조구간 화소 수치의 평균값으로 대체하는 필터이다. 비교평균 필터는 높이영상에서 노이즈 판별을 통한 보정과정으로 인하여 복원 영상의 선명도를 유지하면서 점 노이즈 제거에 좋은 성능을 보인다. 표면이 거칠고 굴곡이 심한 시료를 측정한 결과 후처리 하지 않은 경우와 비교하여 잡음성 화소를 약 1/3로 감소시키는 성능 향상이 있었다. In this paper, in order to enhance the image reconstruction performance of white light scanning interferometry(WLI), we demonstrate the scattered point noise filtering performance of post-processing methods. Median filtering is similar to using an averaging filter. Because the median value is less sensitive than the mean to extreme values, the median filter can remove the scattered point noise from a height-map without significantly reducing the sharpness of the image. In several specific cases, however, the median filter can't remove the scattered point noise. Therefore, we propose a comparative mean filter that uses order-statistic filtering and the mean of the neighborhood pixels. The performance is demonstrated by measuring an array of metal solder balls fabricated on PCB. The proposed method reduced the noise pixels by 4.4 percent.
가간섭 영역 외의 배경 잡음성 간섭무늬 신호 필터링을 통한 백색광 주사간섭계의 성능 향상
임해동,이민우,이승걸,박세근,이일항,오범환,Yim, Hae-Dong,Lee, Min-Woo,Lee, Seung-Gol,Park, Se-Geun,Lee, El-Hang,O, Beom-Hoan 한국광학회 2009 한국광학회지 Vol.20 No.5
본 논문에서는 백색광 간섭계(White Light Interferometry, WLI)의 데이터 처리 과정에서 가간섭 영역 외의 배경 잡음성 신호 필터링을 통하여 백색광 주사 간섭계의 성능을 향상시켰다. 광학계의 개구수(Numerical Aperture, NA)가 유한한 백색광 간섭계의 경우, 단차가 크고 표면 굴곡이 심한 시료를 측정하게 되면 유한한 초점심도(Depth Of Focus, DOF)에 의하여 배경 잡음이 발생하며, 반사가 심한 경면의 경우에는 간섭무늬 신호보다 배경 잡음의 영향을 많이 받게 된다. 따라서 배경 잡음을 제거하기 위하여 간섭무늬 신호 자체 형상에 영향을 주지 않으면서 효율적으로 배경 잡음 필터링이 가능한 전후 구간 평균법을 제시하였다. 전후구간 평균법은 원 데이터와 그 이동평균과의 차이를 이용하는 방법으로, 고속으로 대략적인 정점의 위치를 파악한 후 정밀도가 높은 가시도 정점 검출 알고리즘으로 처리하여 측정 속도와 정밀도를 높였다. 전후구간 평균법을 이용하여 배경 잡음을 제거한 경우, 제거하지 않은 경우와 비교하여 잡음 화소가 약 1/4로 감소되었다. In order to enhance the background noise filtering performance of the white light interferometry(WLI), we demonstrate the noise filtering performance of preprocessing of the measured fringe signals. The WLI was realized through a mirau interferometer which was equipped with a green LED. When measuring large-height and rough surface objects, the illumination optics are considered the numerical aperture(NA) and the depth of focus(DOF). In this case, the limited NA of the illumination optics has a considerable impact on the interference fringe. Therefore, we propose a preprocessing method that uses the intensity difference between the measured intensity and the moving average intensity. The performance is demonstrated by measuring an array of metal solder balls fabricated on printed circuit board(PCB). The proposed method reduces the noise pixels by 15 percent.