http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
75톤급 액체로켓엔진 연소기 저압시험을 통한 연소성능 예측
한영민(Yeoung-Min Han),김종규(Jong-Gyu Kim),이광진(Kwang-Jin Lee),임병직(Byoung-Jik Lim),서성현(Seonghyeon Seo),최환석(Hwan-Seok Choi) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.5
우주발사체용 75톤급 액체로켓엔진 연소기의 저압연소시험에서 얻은 데이터를 기본으로 75톤급 연소기의 연소특성속도 및 비추력을 예측하였다. 75톤급 연소기 저압연소시험에서 연소특성속도는 약 1750 m/sec, 비추력은 240 sec로 30톤급 연소기의 저압 성능보다 높은 값을 보여주었다. 30톤급 연소기의 연소시험에서 얻은 저압/고압 관계식을 통해 75톤급 연소기의 설계점에서 연소특성속도는 약 1770 m/sec, 비추력은 약 278 sec로 목표치를 상회하는 값을 예측하였다. The performance of 75 ton liquid rocket engine combustion chamber for a space launch vehicle was predicted through firing tests at low pressure. In low pressure tests of 75 ton LRE combustor chamber, the combustion characteristic velocity of 1750 m/sec and the specific impulse of 240 sec were obtained which are higher than the low pressure performance of 30ton combustion chamber. The combustion characteristic velocity of 1770 m/sec and the specific impulse of 278 sec at design point for 75 ton LRE combustion chamber were predicted by using the low/high pressure performance correlation of 30ton LRE combustion chamber.
이금오(Keum-Oh Lee),유철성(Chul-Sung Ryu),임병직(Byoung-Jik Lim),최환석(Hwan-Seok Choi) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.5
액체로켓 연소기에 사용되는 열차폐코팅(TBC)의 내구성 시험 기술동향을 조사하였다. 표면 접합력 측정을 위한 기계적 시험, 레이저나 가열로, 버너나 플라즈마 등을 이용한 열피로 시험, 분사기를 이용한 소형 연소시험, 열적 기계적 피로시험 등의 많은 내구성 시험들이 있었다. 연소기에 사용하기 위해 이러한 시편 수준의 시험을 통해 내구성이 확보된 TBC를 결정할 수 있으며, 실제 연소시험을 통해 내구성을 검증할 수 있다. Durability testing method trends of the thermal barrier coating(TBC) for the combustion chamber of the liquid-propellant rocket engine has been investigated. Many types of the durability testing method such as the mechanical tests to measure surface cohesion force, the thermal fatigue tests with laser, furnace, burner or plasma, the small scale combustion tests using injectors, and the thermo-mechanical fatigue tests were observed. The TBC with sufficient durability can be selected for the use of combustion chamber through such specimen-level tests and the durability can be verified by the tests using the real scale combustion chambers.
이광진(Kwang-Jin Lee),김종규(Jong-Gyu Kim),임병직(Byoung-Jik Lim),김홍집(Hong-Jip Kim),서성현(Seong-hyeon Seo),한영민(Yeoung-Min Han),최환석(Hwan-Seok Choi) 한국항공우주연구원 2007 항공우주기술 Vol.6 No.2
재생냉각과 막냉각 그리고 열차폐 코팅이 적용된 재생냉각 축소형 연소기를 이용하여 연소시험을 수행하였다. 시험결과 적용된 냉각 방식은 설계 조건에서 그 역할을 충실히 수행하였으나 연료 매니폴드 내에 삽입된 구조 보강용 링에 의한 연료 유동의 불안정성으로 인해 고주파 연소불안정이 발생하였다. 연료 유동의 불안정성은 삽입 링을 제거함으로써 개선되었고 추가 연소시험을 통해 수정된 연소기의 연소안정성을 검증할 예정이다. It was carried out hot-firing test with a regenerative-cooled sub-scale combustor which was applied regenerative-cooling, film cooling and thermal barrier coating. Test results showed that cooling methods used in the combustor play an full role in the operation of the combustor under the design condition but it is occurred high frequency combustion instability due to unsteady flow of fuel by structural support ring inserted in fuel manifold. The flow pattern of fuel was improved by excluding the ring and it will be carried out additional hot-firing test to verify the combustion stability of modified combustor.
정기훈 ( Ki Hoon Jung ),길태옥 ( Tea Ock Khil ),임병직 ( Byoung Jik Lim ),윤영빈 ( Young Bin Yoon ) 한국분무공학회 2004 한국액체미립화학회지 Vol.9 No.4
N/A Breakup characteristics of liquid sheets formed by the impingement of two water jets, such as a breakup length and a breakup wavelength of sheet, were investigated as increasing the injection velocity up to 30m/s and the ambient gas pressure up to 4.0㎫. While round edged orifices formed a laminar sheet which has no waves on the sheet when the injection velocity is low, sharp edged orifices formed a turbulent sheet which has impact waves irrespective of the injection velocity. Thus we compared the differences of breakup characteristics between them. The results showed that the aerodynamic force significantly affects the breakup of laminar sheet when the gas based Weber number is higher than unity. It was also found that the turbulent sheets have three breakup regimes, i.e. expansion regime, wave breakup regime and catastrophic breakup regime according to the gas based Weber number.