http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박상근(Sangkun Park) (사)한국CDE학회 2021 한국CDE학회 논문집 Vol.26 No.2
This paper proposes a 3D image augmentation method for improving the generalization performance of deep neural networks. It allows us to enrich the diversity of training data samples that is essential in medical image segmentation tasks, thus reducing the data overfitting problem caused by the fact the scale of medical image dataset is typically smaller. It also enables us to predict medical segmentation surfaces in Euclidean space without additional labeled datasets. This method includes image transformation functions, which are comprised of a spatial deformation and image intensity change, enabling the synthesis of complex effects such as variations in anatomy and image acquisition procedures. Our numerical experiments demonstrate that the proposed approach provides significant improvements over state-of-the-art methods for 3D medical image segmentation.
이호상(H. S. Lee),배형섭(H. S. Bae),박동현(D. H. Park),이세호(S. H. Lee),박두용(D. Y. Park) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
사출성형 공정에서 냉각 시간은 총 사이클 시간의 약 70%를 차지하기 때문에 금형의 냉각 시간 단축은 생산성을 높이기 위해 대단히 중요하다. 또한 냉각공정에서 성형품 위치에 따라 발생하는 온도편차는 냉각 시간을 지연시킬 뿐만 아니라 휨 변형을 일으키는 주요인이 된다. 본 연구에서는 CO₂ 가스를 사용하여 금형을 급속하게 냉각시킬 수 있는 CO₂ 냉각 모듈을 개발하고, 이를 사출성형 실험에 적용하였다. CO₂ 냉각 모듈은 12 개의 육각블록, 8 개의 곡면블록, 7 개의 공급파이프, 베이스블록 등으로 구성되어 있으며, 각각의 육각블록 안에 직경 0.9 mm의 노즐을 7개씩 설치하여 균일한 면상냉각이 가능하도록 하였다. 각각의 공급파이프에는 2-4 개의 육각블록 또는 곡면블록을 설치하였으며, 유동해석을 적용하여 균일한 토출유량을 구현할 수 있는 각각의 토출부 직경을 도출하였다. 또한 CO₂ 냉각모듈에 대한 구조해석을 적용하여 사출압력에 의한 변형과 응력을 분석하고 구조설계에 반영하였다. CO₂ 가스 토출위치가 금형냉각에 미치는 영향을 고찰하기 위해 핫플레이트를 제작하고, 미세한 모세관을 통해 이산화탄소를 토출하기 위한 주입 시스템을 구축하였다. 온도센서를 활용한 실험을 통해 가열판과 모세관 튜브 사이의 최적 간격을 도출하고, 금형 냉각 효과를 극대화 시킬 수 있도록 하였다. 개발한 CO₂ 냉각 모듈을 크기 300*100 mm, 두께 1.5 mm, R50 mm인 곡면 형상의 성형품 사출성형에 적용하고, 냉각 효과를 분석하였다.
이호생(H.S Lee),차상원(S.W Cha),문덕수,오위영(O.W. Young),김현주(H.J Kim) 한국해양환경·에너지학회 2014 한국해양환경공학회 학술대회논문집 Vol.2014 No.11
극지방과 같은 극한지의 저온 해수열에너지를 이용한 복합해수플랜트 개념설계를 수행하였다. 복합해수플랜트는 해수난방시스템과 온도차발전플랜트로 구성된다. 즉, 저온 해수를 해수난방시스템의 증발기 열원으로 사용하여 난방열을 공급하고, 해수난방시스템에서 배출되는 해수를 온도차발전으로 공급하여 전기를 생산하게 된다. 온도차발전의 경우 배출 해수를 증발기 열원으로 이용하고, 극한지 대기를 응축기 열침으로 이용하게 된다. 해수난방시스템과 온도차발전플랜트를 연계하여 극한지에 적용 가능한 복합해수플랜트를 제안하기 위한 개념설계를 수행하였고, 플랜트 모듈 용량별 필요 해수, 난방 용량 및 생산 전력량에 대한 기초 해석을 수행하였다. 추후 극한지 지역별 해수 온도, 작동유체 및 사이클별 적용 가능한 복합해수플랜트에 대한 열설계도를 제시하고자 한다. Ocean Thermal Energy Conversion(OTEC) is a method that utilizes the natural temperature gradient that exists in tropical ocean between warm surface water and the deep sea water to generate electricity. When the temperature difference between surface seawater and deep seawater is over 20℃, the system can be run with much better efficiency. Researches for the cases of low temperature differences are also ongoing. In this paper, to perform an experiment on the 20kW OTEC, a closed OTEC cycle was designed and fabricated. R32 was used as the working fluid, and the temperature of the heat source and heat sink were 26℃ and 5℃ respectively. A semi-welded-type heat exchanger was used as the evaporator and condenser, and the OTEC cycle was designed for a gross power of 20kW. R32-OTEC was installed in Seawater Utilization Plant Research Center in Gosung-gun, Gangwon-do. In order to analyze performance of the R32-OTEC pilot plant, the simulation results were compared to the experiment results.