http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
제주 신양섭지해수욕장 주변 방두만 거머리말 군락 복원을 위한 실험적 이식
이형우,강정찬,박정임,김명숙,LEE, HYUNG WOO,KANG, JEONG CHAN,PARK, JUNG-IM,KIM, MYUNG SOOK 한국해양학회 2021 바다 Vol.26 No.4
제주도 동쪽에 위치한 신양섭지해수욕장 주변 방두만에는 과거 거머리말이 넓게 서식하였으나, 1990년대 방파제 공사 이후 모두 소실되었다. 본 연구는 방두만의 거머리말 서식지 복원을 위한 이식 적지 선정을 위해 2019년 1월과 2020년 1월에 방두만의 6개소에 거머리말을 이식한 후 생육 환경과 이식된 거머리말을 10개월간 월별 조사하였다. 거머리말 이식은 철사고정법을 이용하여 각 장소 당 500개체를 이식하였다. 이식된 거머리말은 모든 장소에서 대부분 생존하여 영양 번식으로 인한 밀도증가가 나타났다. 각 장소의 환경 즉, 수중광량, 수온과 염분농도는 유의한 차이가 나타났지만 모두 거머리말 생육에 적합하였다. 모든 장소에서 봄부터 파래가 출현하여 여름 동안 누적되었으나, 거머리말의 생존과 생장에는 유의한 영향을 미치지 않았다. 이식된 거머리말은 이식 3개월 후 112.5~300%의 밀도증가율이 나타났으며, 모든 장소에서 봄과 초여름 동안 높은 밀도 증가율을 보였다. 거머리말의 형태는 이식 충격으로 인하여 모든 장소에서 1~2 개월간 감소하였다가 이후 다시 증가하여 새로운 환경에 잘 적응한 것으로 확인되었다. 그러나 이식 후 8~9개월이 경과하는 늦여름부터 초가을 동안 2019년 2회, 2020년 3회의 강력한 태풍이 조사 지역을 관통하였다. 이로 인해 이식 10개월 후 방두만의 중심부에 위치한 2개소의 거머리말은 모두 소실되었으나, 방두만의 서쪽에 위치한 3개소 거머리말의 밀도증가율은 192~312%로 높게 유지되었다. 이로써 방두만의 잘피서식지 조성이 가능함을 알 수 있었고, 이식 거머리말의 밀도 증가율이 높고 태풍에도 안전한 방두만의 서쪽 연안이 생육 적지임을 확인할 수 있었다. Eelgrass, Zostera marina L., was widely distributed around Sinyangseopji Beach in Bangdu Bay, on the eastern coast of Jeju Island, until breakwater construction in the late 1990s resulted in its complete loss. Six experimental sites were identified for restoration of the Z. marina bed in Bangdu Bay. Using the staple method, 500 Z. marina shoots were transplanted at each site in January 2019 and 2020. The transplants, along with environmental parameters, were monitored for 10 months following transplantation. There were significant differences in underwater irradiance, water temperature, and salinity among the sites, but all were suitable for Z. marina growth. The Ulva species, an opportunistic alga, appeared in spring and accumulated during summer at all sites; however, there was no significant effect of Ulva species on the survival and growth of the eelgrass transplants. Most of the transplanted Z. marina survived, and after 3 months, the density increased by 112.5-300% due to vegetative propagation, with a rapid rate of increase observed during spring and early summer at all sites. For 1-2 months after transplanting, the Z. marina shoots showed signs of transplant shock, after which the shoot density increased at all sites, confirming that all transplants adapted well to the new environment. However, in both 2019 and 2020, during late summer to early fall, the sites experienced heavy damage from typoons (twice in 2019 and three times in 2020) that hit Bangdu Bay. The transplants at two sites located in the center of Bangdu Bay were completely destroyed, but those at three sites located to the west of the bay showed a 192-312% increase in density. Thus, we confirmed that the Bangdu Bay Z. marina bed can be restored, with the highest probability of success for Z. marina restoration on the western side of Bangdu Bay, which is protected from typhoons.
다중 직교 특성을 갖는 FH-MFSK 방식의 수중음향통신
이형우,김기만,손윤준,김우식,천승용,이상국,Lee, Hyeung-Woo,Kim, Ki-Man,Son, Yun-Joon,Kim, Woo-Sik,Chun, Seung-Yong,Lee, Sang-Kook 한국음향학회 2014 韓國音響學會誌 Vol.33 No.6
In this paper, we propose an underwater acoustic communication of FH-MFSK(Frequency-Hopped Multiple Frequency Shift Keying) system with multiple orthogonal property. Generally, the processing of FSK(Frequency Shift Keying) method is simple, but it is vulnerable to ISI (Inter-Symbol Interference) caused by multipath transmission. In this paper, the orthogonal codes are generated with the same number of transmitting symbols, and these codes are corresponding to multiple frequencies. We used m-sequence to generate multiple orthogonal codes. We compared the performance of proposed method with conventional MFSK method via the experiment. As a result, we confirmed that the proposed method shows 6~10 % lower error rate at 100 bps than conventional method. 본 논문에서는 다중 직교 특성을 갖는 FH-MFSK(Frequency-Hopped Multiple Frequency Shift Keying) 방식의 수중음향통신을 제안한다. 일반적으로 FSK(Frequency Shift Keying) 방식은 처리 과정이 단순하지만 다중 경로 전달로 인해 발생하는 인접 심볼간 간섭에 취약하다. 본 논문에서는 전송하고자 하는 심볼 수와 동일한 서로 직교 성질을 갖는 코드들을 생성한다. 이 코드 값들은 각각 다수의 주파수들에 대응된다. 이러한 다중 직교 코드를 생성하기 위해 m-sequence를 이용하였다. 실험을 통해 제안된 방법의 성능을 기존의 MFSK 방식과 비교하였다. 100 bps 전송율에서 제안한 방법은 기존의 방법보다 오차율이 6 ~ 10 % 낮게 나타났다.