http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이해석,정진기,김태영,남기대 ( Hae Suck Lee,Jin Kie Jeong,Tae Young Kim,Kie Dae Nam ) 충북대학교 산업과학기술연구소 1995 산업과학기술연구 논문집 Vol.9 No.2
Abstract_Roman New six aldehyde polyoxyethylene glycol acetals were synthesized through the reaction of aliphatic aldehydes such as dodecyl aldehyde, hexadecyl aldehyde with excess diethylene glycol, triethylene glycol and tetraethyene glycol respectivel
포 발사에 따른 쉘터 구조물의 차음 및 구조안전성 연구
이해석,허동은,박노석,나태흠,장요한,홍준희,Lee, HaeSuk,Heo, DongEun,Park, NoSeok,Na, TaeHeum,Jang, YoHan,Hong, JunHee 한국군사과학기술학회 2017 한국군사과학기술학회지 Vol.20 No.5
This paper describes the sound insulation and structural safety of the shelter which may be used for shooters. The noise level of the shelter should be less than 100 dB on the basis of the Industrial Safety and Act, the World Health Organization and the MIL-STD. The sound insulation design was designed for the shelter structure. The designed shelter performance was verified by the real measurement after completing the construction of the shelter. The system was also designed using the finite element method with data of sound pressure measured in the test. Its response was obtained numerically. It is proved that the shelter structure is sufficiently safe considering the calculated maximum stress level with the allowable stress of structural property.
이해석,박성호,Lee, HaeSuk,Park, SungHo 한국군사과학기술학회 2014 한국군사과학기술학회지 Vol.17 No.6
The silencer for the medium caliber gun was studied to reduce the propagation of gun-generated noise from the firing test range to the community. Three types of silencer were made to compare the reduction of sound pressure level and the effect of chamber volume and the exit angle to the reduction of sound pressure was considered. The structural analysis and measurement of pressure in the silencer showed that the structure is safe in terms of strength. The increase of recoil force to buffer must be considered in the development of silencer. The hypothesis test on the muzzle velocity for the existence of silencer showed that there are no difference at the significance level of 0.05.
이해석,홍준희,Lee, Haesuk,Hong, Junhee 한국군사과학기술학회 2016 한국군사과학기술학회지 Vol.19 No.4
The paper represents the experimental analysis of the shock noise of medium caliber guns when a projectile is passed through the shielding material. In the study, the shielding material was constructed and tested in three separate experiments. The shielding material was not installed for medium caliber gun in Case 1. A medium caliber gun was fully covered with shielding material in Case 2, and another one was put with shielding material near muzzle in Case 3. In each experiment, the experimental data was compared with each other. Results showed the firing shielding material achieved a significant noise reduction in $90^{\circ}$ to the noise source. Case 3 is confirmed to be better effective than Case 2 in the near field. But, the noise reduction in the far field is small in quantity due to the low frequency. The paper is considered that further study is necessary for the shielding material which can absorb a low frequency noise in the future.
레이저 가공에 의한 비정질 실리콘 박막 태양전지 모듈 제조
이해석(Lee, Hae-Seok),어영주(Eo, Young-Joo),이헌민(Lee, Heon-Min),이돈희(Lee, Don-Hee) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.11
Recently, we have developed p-i-n a-Si:H single junction thin film solar cells with RF (13.56MHz) plasma enhanced chemical vapor deposition (PECVD) system, and also successfully fabricated the mini modules (>300cm²), using the laser patterning technique to form an integrated series connection. The efficiency of a mini module was 7.4% (Area=305cm², Isc=0.25A, Voc=14.74V, FF=62%). To fabricate large area modules, it is important to optimise the integrated series connection, without damaging the cell. We have newly installed the laser patterning equipment that consists of two different lasers, SHG-YVO₄ ({lambda}=0.532{mu}m) and YAG ({lambda}=1.064{mu}m). The mini-modules are formed through several scribed lines such as pattern-l (front TCO), pattern-2 (PV layers) and pattern-3 (BR/back contact). However, in the case of pattern-3, a high-energy part of laser shot damaged the textured surface of the front TCO, so that the resistance between the each cells decreases due to an incomplete isolation. In this study, the re-deposition of SnOx from the front TCO, Zn (BR layer) and Al (back contact) on the sidewalls of pattern-3 scribed lines was observed. Moreover, re-crystallization of a-Si:H layers due to thermal damage by laser patterning was evaluated. These cause an increase of a leakage current, result in a low efficiency of module. To optimize a-Si:H single junction thin film modules, a laser beam profile was changed, and its effect on isolation of scribed lines is discussed in this paper.
박막형 Si태양전지를 위한 후면반사층 ZnO:Al 최적화
이승윤(Lee, Seung-Yoon),지광선(Ji, Kwang-Sun),어영주(Eo, Young-Joo),이해석(Lee, Hae-Suk),이헌민(Lee, Heon-Min),이돈희(Lee, Don-Hee) 한국신재생에너지학회 2008 한국신재생에너지학회 학술대회논문집 Vol.2008 No.05
비정질 Si박막 태양전지의 후면 반사층을 위한 ZnO:Al TCO박막을 RF Magnetron Sputtering 방법으로 증착하였으며 이의 전기적, 광학적 특성 및 구조를 최적화하였다. Sputtering의 공정변수인 증착 RF 파워, 기판온도, 타겟-기판 거리, 증착압력을 변화시켜 ZnO:Al 단일막의 전기적, 광학적 특성을 최적화 하였고,이를 소면적 태양전지 셀 및 모듈에 적용하였다.그 중 증착 RF파워 및 압력이 단일막의 전기적,광학적 특성에 타겟-기판거리는 박막의 균일도에 큰 영향을 주었다. 압력에 따른 박막의 치밀도를 SE EMA방법으로 정량화하였고, 광학적, 전기적 특성과 연관하여 해석하였다. ZnO:Al 박막의 물성을 최적화하여 태양전지 셀에 적용한 결과 두께 80nm에서 가장 큰 Jsc의 증가를 보였고, 적용 전에 비해 약 18%의 광변환효율의 증가를 얻었다. 최적화된 태양전지 셀의 광변환효율은 9.9%, 모듈 효율은 7.4%였다.
시장지향성과 기업가적 지향성이 전시주최자의 경영성과와 신규 전시회 개발역량에 미치는 영향에 관한 연구
이해석 ( Hae Seok Lee ),김봉석 ( Bong-seok Kim ) 한독경상학회 2020 經商論叢 Vol.38 No.4
최근 아시아 지역을 중심으로 글로벌 전시주최자의 진출이 활발해지고 있으며, 특히 우리나라 시장에 대한 이들의 관심 증대는 인적ㆍ물적ㆍ네트워크 자원에 있어 비교 열위에 있는 국내 전시주최자에 위협요인으로 작용할 것으로 전망된다. 따라서 본 연구는 국내 전시주최자의 경영성과와 이에 대한 중요한 영향요인인 시장지향성, 기업가적 지향성, 신규 전시회 개발역량 간 영향관계를 분석하는 것을 목적으로 한다. 요인간 영향관계에 대한 실증분석을 수행하기 위해 한국전시주최자협회 회원사 임직원을 모집단으로 설정하고, 이메일 및 회원사를 직접 방문하여 조사를 수행하였으며, 총 320명을 대상으로 표본을 설계하고 설문조사를 실시하였으며, 최종적으로 총 170개의 설문지를 회수하고, 데이터 클리닝을 통해 최종 163개의 유효표본을 구조 방정식 모형을 활용하여 분석하였다. 분석결과, 시장지향성은 전시주최자의 경영성과와 신규 전시회 개발역량에 유의한 영향을 미치지 않는 것으로 분석되었다. 반면, 기업가적 지향성은 전시주최자의 경영성과와 신규 전시회 개발역량에 모두 유의한 영향을 미치는 것으로 분석되었으며, 아울러 신규 전시회 개발역량은 전시주최자의 경영성과에 유의한 영향요인으로 규명되었다. 이에 본 연구는 향후 국내 전시주최자들이 미래의 잠재 경쟁자인 글로벌 주최자와의 경쟁에서 살아남기 위해 과감한 투자활동, 제도개선, 제안 및 보상활동을 강화하여야 하며, 이를 통해 신규 전시회 개발역량을 강화할 수 있다는 시사점을 제시하였다. Increasing business opportunities are turning the attention of global leading trade show organizers toward the Korean exhibition market as well as those of other Asian countries. It is prospected that recent market movements will negatively affect domestic trade show organizers competing against global tycoons that have comparatively more advanced human, capital and networking resources. The purpose of this study is to analyze the influential relations between the business performances of domestic small-to-medium trade show organizers and factors such as market orientation and entrepreneurial orientation. In order to effectively achieve the purpose of this study, preceding studies were conducted to discover that market orientation, entrepreneurial orientation and NPD capabilities are feasible factors that affect domestic trade show organizers’ business performances. A survey of 163 domestic trade show organizers was conducted, and a structured equation model (SEM) was used for verification after setting hypotheses. The empirical study suggests that entrepreneurial orientation has a significant influence on both NPD capabilities and business performances of domestic trade show organizers. On the other hand, market orientation was not proved to have any influence on either factor. In addition, the study found that NPD capabilities have a significant influence on the business performances of domestic trade show organizers. The implications based on the exploratory research clearly suggest that domestic trade show organizers should strongly invest in expanding resources, R&D and incentives to increase their own NPD capabilities.
이해석(Hae Suk lee),박성호(Sung ho Park),김상민(Sang min Kim),강태엽(Tae yeop kang),김응수(Heung soo Kim) 한국소음진동공학회 2014 한국소음진동공학회 학술대회논문집 Vol.2014 No.4
To reduce the transmission of large gun-generated noise from the firing test range to the community, we have tested a silencer to be used with howitzer(155mm KM114A2) after simulation. Numerical analysis was conducted by using a commercial CFD code, FLUENT. To analyze complex blast flow fields, the Spalart-Allmaras model was applied under 2 dimensional and axisymmetric conditions. Firing tests were also performed with the KM114A2 howitzer while the silencer was installed. This paper describes a result of comparison between results of computer analysis and test outcomes which were gotten by firing 155mm projectiles at the testing range. This paper will also be informative to the muffler design which will be adapted to 155mm large gun in the future.