Barkhausen noise를 이용한 1Cr-1Mo-0.25V강의 열화도 평가

이종민,안봉영,남승훈,이승석,이억섭,남영현,Lee, Jong-Min,Ahn, Bong-Young,Nahm, Seung-Hoon,Lee, Seung-Seok,Lee, Ouk-Sub,Nam, Young-Hyun 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.7

It is inevitable to evaluate the life of turbine rotor because the operating periods of power plants need to be extended. For the test, seven kinds of specimens with different degradation levels were prepared by the isothermal heat treatment at $630^{\circ}C$. Magnetic methods utilizing Barkhausen noise coercive force($BN_c$) were applied to detect the degradation caused by thermal aging. Magnetic property of material is related with domain dynamics and that is affected by the microstructure of material. Therefore $BN_c$ is very sensitive to the microstructure change of the material. With the increase of degradation, $BN_c$ was decreased and this phenomenon is considered due to precipitations and grain size. The result was compared with Vickers hardness($H_v$) and coercive force($H_c$) to detect the relative variation, and was related with $H_v$ and YS to estimate the change of the mechanical properties with the degradation.

제강슬래그 아스팔트혼합물의 도로포장 성능 평가

이종민,이윤모,이진우,Lee, Jong-Min,Lee, Yun-Mo,Lee, Jin-Woo 한국건설순환자원학회 2021 한국건설순환자원학회지 Vol.16 No.2

Cone Beam Computed Tomography의 두부계측분석을 통한 골격성 제3급 부정교합 환자에서 악교정 수술 후 입술과 주위 연조직의 수직적 변화

이종민,강주완,이종호,김창현,박재억,Lee, Jong-Min,Kang, Joo-Wan,Lee, Jong-Ho,Kim, Chang-Hyen,Park, Je Uk 대한악안면성형재건외과학회 2012 Maxillofacial Plastic Reconstructive Surgery Vol.34 No.5

Purpose: The aim of this study is to evaluate the vertical changes of the lip and perioral soft tissue, following orthognathic surgery in skeletal class III patients by a cephalometric analysis of a cone beam computed tomography (CBCT). Methods: A total of 20 skeletal class III patients, who had bimaxillary surgery with Le Fort 1 osteotomy and bilateral sagittal split ramus osteotomy, were included in this study. The surgical plan for maxilla was posterosuperior impaction with the anterior nasal spine, as the rotation center. Further, the surgical plan for mandible was also posterosuperior movement. The soft tissue changes between lateral cephalogram and CBCT were compared. And the correlations between independent variables and dependent variables were evaluated. Results: There were no significant differences of the soft tissues changes between lateral cephalogram and CBCT. Upper lip philtrum length (SnLs), nasolabial angle increased and upper lip vermilion length (LsStms), lower lip length (StmiB'), lower lip vermilion length (StmiLi), lower lip philtrum length (LiB') and soft tissue lower facial height (SnMe') decreased after surgery. Change of SnLs (${\Delta}$SnLs) was influenced by vertical change of menton (${\Delta}$MeV), and change of LsStms (${\Delta}$LsStms) was influenced by upper lip thickness (ULT). Change of StmiLi' (${\Delta}$StmiLi') were influenced by preoperative overjet. Change of StmiB' (${\Delta}$StmiB') were influenced by preoperative overjet, vertical change of lower incisor (${\Delta}$L1V) and horizontal change of posterior nasal spine (${\Delta}$PNSH). Change of LiB' (${\Delta}$LiB') was influenced by ${\Delta}$L1V and ${\Delta}$PNSH. Change of SnMe' (${\Delta}$SnMe') was influenced by ${\Delta}$MeV, horizontal change of upper incisor (${\Delta}$U1H) and horizontal change of lower incisor (${\Delta}$L1H). ${\Delta}$Nasolabial angle was influenced by change of ULT (${\Delta}$ULT). Conclusion: Both soft tissues and hard tissues can be evaluated by CBCT. Posterosuperior rotation of maxillomandibular complex resulted in increase of upper lip philtrum length and nasolabial angle, while the upper lip vermilion length, lower lip philtrum length, lower lip vermilion length, and soft tissue lower facial height showed a decrease.

미사일 탑재형 GPS 안테나 설계

이종민,우종명,Lee Jong-Min,Woo Jong-Myung 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.9

본 논문에서는 1.575 GHz에서 운용되는 미사일 탄두 탑재형 GPS 수신 안테나를 원형 패치 안테나 구조로 미사일 탄두부의 중간에 장착하였으며, 원형 링 구조의 단락 핀을 이용하여 패치면과 접지면을 연결하였다. 제안된 안테나는 이중 급전과 이중 급전점의 위상 차이를 이용하여 미사일 비행 축과 수직한 방향(H-면)에서 무지향성의 방사 특성을 갖도록 설계되었다. 유전체로 1.6 mm 높이의 $FR4(\varepsilon_r=4.6)$를 사용하였으며 무지향성 방사패턴은 원형 패치 직경 59.5 mm, 단락 핀 직경 14 mm일 때 최적화되었다. 또한 실제 미사일 형태를 갖도록 직경 100 mm, 길이 500 mm의 원통형 몸체를 탄두 하단부에 장착하였다. 이때 이중 급전점의 사이각과 이중 급전점의 위상을 변화시키면서 H-면에서의 방사 패턴의 변화를 측정하였으며 그 결과, 이중 급전점의 사이각과 이중 급전점의 위상 차이가 각각 $100^{\circ}$일 때 이득 -5.55 dBd, 최대/최소 방사 전력 레벨 차 3.98 dB를 갖는 무지향성에 가까운 방사 패턴 특성을 얻을 수 있었다. A GPS receiving antenna installed in the missile's warhead is designed and fabricated at a center frequency 1.575 GHz. The circular shaped antenna is installed in the middle of the warhead where the antenna's patch and the ground plane are connected with a hollow cylindrical shaped short pin. Using the dual feeding and phase difference method, an omni-directional radiation pattern which direction is normal to the missile's axis(H-plane) is obtained. The optimized diameters of the circular patch and the cylindrical ring typed shorting pin of the GPS receiving antenna which use the FR4.material(dielectric constant $\varepsilon_r=4.6$) are 59.5 mm and 14 mm, respectively. The cylindrical body with diameter 100 mm and height 500 mm is attached to the lower part of the warhead in order to complete the missile figure. The radiation patterns are measured by changing the angle and phase between the dual feeding points. When the phase difference of dual feeding is $100^{\circ}$ and the angle between the dual feeding points is $100^{\circ}$, the nearly omni-directional radiation pattern in the H-plane is obtained. In this case, the antenna gain is -5.55 dBd and the relative level difference between the maximum and the minimum radiation intensity is 3.98 dB.

사범대학 살립시다

이종민,Lee, Jong-Min 한국대학교육협의회 1997 大學敎育 Vol.88 No.-

선생님! 무엇을 가르쳐야 합니까

이종민,Lee, Jong-Min 한국대학교육협의회 1991 大學敎育 Vol.54 No.-

도시형 자기부상열차용 굴절형 분기장치의 개발(I)

이종민,조흥제,김인근,Lee, Jong-Min,Jo, Heung-Je,Kim, In-Geun 한국기계연구원 1999 硏究論文集 Vol.29 No.-

This paper presents the status quo of the development of a piecewise bendable switch system for the urban transit MagLev. MagLev system as well as railroad requires switch systems to reach its destination. Requirements of the switch system for commercial lines are high speed operation satisfying about 2-3 minute headway and system reliability, etc. Parallel moving type switch system was installed on the test track of urban transit MagLev in KIMM. In this system, switch operation from one position to another can be done in about 90 seconds. Therefore, we concluded that this system can not satisfy the headway for the commercial lines. We decided to develop a high speed piecewise bendable switch system in which switching can be done in 20 seconds. Designed switch system is very complicated in view of operating mechanism. It consists of 11 segmented girder beams driven by hydraulic cylinders. To gain the idea of a piecewise bendable switch system, we manufactured and tested a 1/5 scale switch model. We are going to construct a full scale piecewise bendable switch system next year.

근접굴착시 건물 하부 지반의 거동

이종민,Lee, Jong-Min 한국지반공학회 2018 한국지반공학회논문집 Vol.34 No.4

근접굴착 시 지반변위를 억제하여 기존건물의 안정성을 확보하기 위해 굴착공사 중 흙막이벽체의 버팀대에 선행하중을 가하고 그 효과를 확인하였다. 선행하중을 가한 경우와 가하지 않은 경우에 대해서도 대형모형실험을 하였다. 지표면에 건물하중이 없는 경우와 건물하중이 있는 경우 각각 0m, 1D, 2D 에 대해 대형모형실험을 실시하였다. 본 연구에서는 모형실험에는 12m 폭의 기존건물을 축척 1:10으로 사용하였고, 폭 2m, 높이 6m, 길이 4m를 가진 대형토조에서 흙막이벽체와 인접건물의 거동에 대하여 실험을 수행하였다. 그 결과, 흙막이벽체의 버팀대에 선행하중을 작용시켜 흙막이벽체의 수평변위를 억제시켰을때 벽체배면 가상주동활동영역 내에 있는 인접건물의 안정성이 크게 향상되는 것을 확인하였다. A pre-load of bracing was imposed to prevent the horizontal displacement on the strut of the braced wall adjacent to the building during the ground excavation. For this purpose, large scale model tests were conducted, without and with pre-load on braced wall. Adjacent building load was also imposed in different locations, that were 0 m, 1D, 2D on ground surface. In this study, model tests in 1:10 scale were performed in real construction sequences, and adjacent building was 12 m in width and the size of model test pit was 2 m in width, 6 m in height, and 4 m in length. As a result, it was found that the stability of the existing building adjacent to the braced wall within Rankine's active zone could be greatly enhanced when the horizontal displacement of the braced wall was reduced by applying a pre-load. which was larger than the designated axial force on the strut of the braced wall.

${\beta}-Lactamase$ 억제작용이 기대되는 7-Arylidene Cephalosporanate 유도체의 합성

이종민,임철부,임채욱,Lee, Jong-Min,Yim, Chul-Bu,Im, Chae-Uk 대한약학회 2008 약학회지 Vol.52 No.4

The synthesis of 7-arylidene cephalosporanates for ${\beta}-lactamase$ inhibitor was described. The reactions of substituted benzyl halides $[1]{\sim}[3]$ with triphenylphosphine gave triphenylphcsphonium chlorides $[4]{\sim}[6]$. These phosphonium salts were treated with n-butyllithium to give ylides, which were reated with 7-oxocephalosporanate [7] by Wittig reaction to afford the 7-exomethylene cephalosporanates $[8]{\sim}[10]$. These cephalosporanates were oxidized to cephalosporanate sulfones $[11]{\sim}[13]$ with mCPBA. The deprotection of benzhydryl cephalosporanate $[8]{\sim}[13]$ with $AlCl_3$ and $NaHCO_{3}$ gave sodium salts of 7-arylidene cephalosporanates $[14]{\sim}[19]$.

최소제곱법을 적용한 지적도근점측량 계산의 정확도 분석

이종민,정완석,이사형,Lee, Jong-Min,Jung, Wan-Suk,Lee, Sa-Hyung 한국국토정보공사 공간정보연구원 2015 지적과 국토정보 Vol.45 No.2

도근점측량과 같은 수평위치를 결정하는 방법 중 최소제곱법은 확률이론에 근거하여 잔차의 분산이 최소가 되는 조건을 만족하는 최확값을 산출하는 방법이다. 본 논문에서는 도선법으로 계산되는 현행 지적도근점측량의 성과와 최소제곱법을 적용한 도근점의 계산성과를 비교하고, 네트워크-RTK 측량결과와 각각의 조정방법에 대한 평균오차를 확인하였다. 실험 결과 최소제곱법이 도선법에 비해 폐합오차를 각 측점에 균등하게 배분하는 것을 확인하였으며, 네트워크-RTK 성과와의 평균오차도 도선법은 2.7cm, 최소제곱법은 2.2cm 산출되었다. 또한 과대오차가 발생한 경우 이를 확인하기 위한 방법으로 정방향 초기값과 역방향 초기값을 이용하여 수평각 과대오차를 확인할 수 있었으며, 관측된 측선거리와 계산된 측선 거리의 차이를 이용하여 거리 과대오차가 발생한 측선을 예측할 수 있었다. A least squares method for adjusting the horizontal network satisfies the conditions which is minimizing the sum of the squares of errors based on probability theory. This research compared accuracy of 3rd cadastral control points adjusted by traditional and least square method with respect to the result of Network-RTK. Test results showed the least square method more evenly distribute closure error than traditional method. Mean errors of least square and traditional adjusting method are 2.7cm, 2.2cm respectively. In addition, blunder in angle observations can be detected by comparing position errors which calculated by forward and backward initial coordinates. However, distance blunder cannot offer specific observation line occurred mistake because distance error propagates several observation lines which have similar directions.