http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강신우 ( Shin Woo Kang ),이승필 ( Seoung Pil Lee ),박준현 ( Jun Hyeon Park ) 한국항행학회 2013 韓國航行學會論文誌 Vol.17 No.6
다른 종류의 센서에서 생산되는 데이터를 하나의 정보로 종합하는 공정으로 멀티 센서 데이터 융합이 연구되고 있으며 다양한 플랫폼에서 활용되고 있다. 항공기도 여러 종류의 센서들을 장착하고 있으며 항공전자 체계에서 이를 통합하여 관리하고 있다. 항공기 센서의 성능이 높아지면서 항공전자 관점에서 센서 정보의 통합이 점차 증가하고 있다. 센서에서 생산된 데이터를 하나의 융합된 정보로 항공기 조종사에게 전시 장비로 시현하기 위한 융합을 담당하는 소프트웨어 관점에서 정보 융합을 다루는 연구는 활성화 되지 않고 있다. 항공기에서 정보 융합의 목적은 올바른 전투상황을 조종사에게 제공하여 임무를 수행하는 데에 필요한 결정을 돕고 이를 위한 조종 업무량을 최소화하는 것이다. 본 논문에서는 다양한 센서들이 운용되는 항공전자 시스템의 멀티센서데이터 융합을 위한 소프트웨어 관점에서 센서들이 생산하는 데이터가 사용자에게 종합된 정보 형태로 제공되기 위한 구조를 보인다. Synthesis process from the data produced by different types of sensor into a single information is being studied and used in a variety of platforms in terms of multi-sensor data fusion. Heterogeneous sensors has been integrated into various aircraft and modern avionic systems manage them. As the performance of sensors in aircraft is getting higher, the integration of sensor information is required from the viewpoint of avionics gradually. Information fusion is not studied widely in the view of software that provide a pilot with fused information from data produced by the sensor in the form of symbology on a display device. The purpose of information fusion is to assist pilots to make a decision in order to perform mission by providing the correct combat situation from avionics of the aircraft and to minimize their workload consequently. In the aircraft avionics equipped with different types of sensors, the software architecture that produce a comprehensive information using the sensor data through multi-sensor data fusion process to the user is shown in this paper.
항공 통신 기술 : 낙뢰보호를 고려한 항공기용 다목적 디스플레이 설계
천영호 ( Young Ho Cheon ),이승필 ( Seoung Pil Lee ),박준현 ( Jun Hyeon Park ) 한국항행학회 2014 韓國航行學會論文誌 Vol.18 No.5
본 논문에서는 다목적 디스플레이의 인증 과정에서 수행 했던 시험 중 간접 낙뢰의 영향성을 검증하기 위한 RTCA DO-160 F,Section 22 시험 수행을 위한 대책 설계 내용 및 시험 과정을 소개한다. 낙뢰 유도 전압은 항공기 전기 전자장비의 기능 장애또는손상을 가져다 주는 데 이것을 낙뢰의 간접영향이라 한다. 이러한 항공기의 낙뢰 간접영향으로부터 항공전자장비를 보호하기 위해서는 항공기에 대한 낙뢰의 영향과 항공기 내부 시스템을 분석하고 해당 부품에 대한 위협 내용에 대한 보호 설계가 필요하다.본 논문에서는 이와 같은 항공기용 다목적 디스플레이의 낙뢰에 대한 보호를 위하여 대책 수준을 결정을 위한 RTCA DO-160 F,Section 22 category 선정 방법 및 선정된 레벨에 따른 부품 선정 방법 등을 소개한다. 또한 선정된 부품의 설계 유효성을 확인하기위하여 실제 시험 과정을 소개한다. 이와 같은 각 단계별 과정 소개를 통하여 향후 개발 예정인 항공전자 장비에 대한 낙뢰 대책 설계의 좋은 사례가 될 것으로 예상한다. In this paper, we introduce measures designed content for RTCA DO-160 F, Section 22 tests performed to verify the effects of indirect lightning and testing process of the test was carried out in the multi-purpose display certification process. This is referred to as indirect effects of lightning capability of an aircraft having electrical electronic equipment failure or damageto bring lightning induced voltages. In order to protect the avionics from lightning indirect effects of these aircraft are analyzing theeffects of lightning strikes on aircraft and aircraft systems and interior design needs protection against the threat on their part. In this paper, we introduce RTCA DO-160 F, component selection process according to Section 22 category selection method and the selected level for determining the level of such measures for protection against lightning of multipurpose display for this aircraft. It also introduces the actual test process to confirm that the designed effectiveness of the selected part. We expect a good example of the lightning planned for future development of measures designed avionics through each step of the process introduced this.
천영호 ( Young Ho Cheon ),이승필 ( Seoung Pil Lee ),박준현 ( Jun Hyeon Park ) 한국항행학회 2013 韓國航行學會論文誌 Vol.17 No.6
민수용 항공기 산업에서는 해당 제품의 성능이 우수 하더라도 항공기의 항행 안전성을 확보하기 위하여 필요한 안전성 요구사항에 대한 적합성을 인정을 받지 못하면 법적으로 항공기에 사용 될 수 없는 특성이 있다 [1].이와 같이 다양하게 적용되어 지고 있는 항공 전자장비의 항행 안전성을 위하여 민간용 항공기에는 기술표준품 인증 제도를 시행하고 있다. KTSO-C113은 항공기용 다목적 전자식 디스플레이의 기술표준품을 인증하는 최소성능표준을 포함하고 있다. 기술 표준품 형식승인은 설계 및 제조에 대한 승인을 의미하여 항공기 장착하여 사용하기 위해서는 별도의 승인이 필요하다. 본 논문을 통하여 항공기용 다목적 디스플레이의 기술 표준품형식승인 제도 및 인증 요구조건을 소개하고 적합성 입증을 위한 인증 사례를 제시한다. Civilian aircraft industry, even if the superior performance of the product in order to ensure the safety of aircraft navigation safety requirements necessary for compliance does not receive a legally recognized can not be used in aircraft characteristics. These are applied in a variety of safety in avionics for navigation of civil aircraft certification standards for the technology is implemented. KTSO-C113 aircraft for the purpose of electronic display technology to authenticate standard contains minimum performance standards. Standard design and manufacturing technology for type approval means approval by mounting the aircraft in order to use a separate approval is required. Through this paper, multi-display technology standards for aircraft type certification approval system and demonstrate compliance with the requirements for the certification practices introduced are presented.
기본형 Link-K 수신 가능한 이중 구조의 소형 UHF 모듈 설계
민세홍,김복기,김강산,이종혁,김종성,배문관,김길훈,이승필,Min, Se-hong,Kim, Bok-ki,Kim, Kang-san,Lee, Jong-hyuk,Kim, Jong-sung,Bae, Mun-kwan,Kim, Kil-hun,Lee, Seoung-pil 한국항행학회 2017 韓國航行學會論文誌 Vol.21 No.4
본 논문에서는 전술 및 조작 상황, 목표 위치 정보 확인이 가능한 Link-K (한국 합동 전술 데이터 링크 시스템)를 활용하여 목표물 재설정을 위한 소형 UHF(ultra high frequency) 수신 모듈을 설계 및 제작하였고, 시뮬레이션을 통해 목표물 재설정에 대한 효과를 분석하였다. 설계된 모듈은 UHF 수신반, 제어반 및 전원분배반으로 구성된다. UHF 수신반은 주파수 하향 변환, 필터링 및 자동이득 제어 등을 수행한다. 제어반은 주파수 하향 변환 된 신호를 복조하고, 정보를 추출하고, 외부 연동을 수행한다. 전원분배반은 외부 전원을 공급하고 각 구성품에 필요한 전원을 생성 및 공급한다. 제작 된 모듈의 크기는 $105{\times}105{\times}80mm$이고 무게는 1.10 kg이며, 수신 가능 거리는 50km 이상이다. In this paper, we designed and fabricated a compact UHF receive module for efficient operation such as tactical and operation situation, target location information confirmation, target reset using Link-K(Korean joint tactical data link system). And the effect of target reset was analyzed by simulation. The designed module consists of UHF(ultra high frequency) receiver section, control section, and power distribution section. The UHF receiver section performs frequency down conversion, filtering and automatic gain control, etc. The control section demodulates frequency down-converted signals, extracts information, and performs external interworking. The power distribution section supplies external power, generates and supplies the power required by each section. The fabricated module was dimension of $105{\times}105{\times}80mm$ and weighed 1.10 kg and The receiving distance is more than 50 km.