액취증의 치료에서 Inaba씨 방법과 절개창을 지연 봉합한 Inaba씨 변법의 비교 조사

이성표,석정훈,양완석 대한성형외과학회 2009 Archives of Plastic Surgery Vol.36 No.6

Purpose: The Inaba's procedure, the treatment of osmidrosis axillae, has the advantages of low recurrent rate and easy to learn, yet it produces early postoperative discomfort and scar formation by tie - over dressing. The authors modified the Inaba's procedure by using delayed suture of the incision wound and omitting tie - over dressing. The comparative study of Inaba's procedure and its modification was performed to confirm the advantages of modified procedure. Methods: The study contains the retrospective analysis of the medical records of 296 patients with osmidrosis who were treated using the Inaba's procedure from December, 1996 to February, 2007. The study also contains the prospective analysis of 20 patients, from March, 2007 to July, 2008, who were treated by the modified Inaba's procedure with delayed suture of the incision wound and gentle pressure dressing instead of tie - over dressing. The operative results of two groups were compared and verified by Mann - Whitney U test(SPSS 12.0). Results: The incidence of complications was 14.5% in the Inaba´s procedure, whereas 6.2% in the modified Inaba's procedure. Both procedures have the same basic surgical procedure in terms of the location of incision site and subdermal shaving of the sweat glands, and therefore similar good results were obtained in the aspect of postoperative axillary odor, recurrent rate and postoperative condition of axillary hair. Certainly, the modified Inaba´s procedure had better outcome in each element of PSS(Patient Scar Self-Rating Scale), compared to the Inaba's procedure. In addition, the modified Inaba's procedure showed a statistical significance in dressing - related pain reduction and overall satisfaction. Conclusion: The modified Inaba’s procedure had advantages of decreased early postoperative complications such as hematoma, discomfort and pain caused by tie - over dressing, and decreased scar formation. However, the drawback was delayed suture of the incision wound after 48 hours.

일본 담보제도의 새로운 전개

이성표 대한변호사협회 2004 人權과 正義 : 大韓辯護士協會誌 Vol.- No.337

2003년 7월 25일 일본에서는 ‘담보물권 및 민사집행제도의 개선을 위한 민법 등의 일부를 개정하는 법률안’이 국회에서 성립되어, 동년 8월 1일 공포되었다. 이 법률에는 민법규정 중의 담보물권에 대한 규정과 관련을 가지는 내용이 포함되어 있다. 일본민법의 담보물권에 대한 규정이 개정된 것은 여러 가지 의미를 갖지만, 특히 일본민사집행법 제180조를 개정함으로써 담보물권에 대한 ‘기능적 전환’을 의도하는 것에 커다란 의미가 있다고 본다. 일본의 민법개정은 지금까지 특별법에 의한 수정이 특징적이었지만, 금번의 개정은 민법 전체의 개정으로서 일본 민법에 본질적인 변혁이 있었다고 말할 수 있다. 또한 이번의 개정법률은 일본의 버블경제의 붕괴 이후 나타난 사회적, 제도적 문제를 해결하는 것이 주된 목적이고, 부차적으로는 이러한 문제로 인하여 담보제도가 왜곡 운용된 부분을 정상적으로 되돌리려 하는 것이라고 할 수 있다. 이를 이해하기 위하여 일본의 버블경제에 대해서 살펴본다. 고도의 경제성장의 결과 축적된 자금이 버블경제를 만들고 그 붕괴로 인한 결과 및 후유증에 관한 부분 또한 살펴보면서 담보제도에 있어서 새로운 제도의 탄생을 기대하게 된다. 새롭게 제정된 제도 즉, 담보부동산수익집행는 어떠한 제도이며 어떤 절차로 진행되는지를 확인한다. 법률의 개정은 일본의 부동산담보제도를 이념적으로 전환시킬 가능성을 내포한 제도로 변환시켰다. 이는 일본 부동산담보제도가 지금까지 교환가치담보에 의존하고 있었으나 새로운 제도 즉, 담보부동산에서 발생하는 수익을 피담보채권의 변제에 충당이 가능한 수익가치담보로 변환이 가능해졌기 때문이다. 아직은 부동산수익담보가 제도로서 기능하기에는 이른 감이 있으나 그 가능성은 충분히 있다고 할 수 있다. 따라서 일본의 부동산담보제도는 이제 교환가치담보에서 수익담보로 전개될 계기를 마련한 것이다.

Densification of Tube-Shaped Transparent Conducting Oxide Target at Reduced Temperature via Initial Heat Treatment Under Pressure

이성표,이종락,정태주,백용균,양승호,홍길수,오경식 대한금속·재료학회 2015 METALS AND MATERIALS International Vol.21 No.6

Transparent conducting oxide such as aluminum doped ZnO (Al-ZnO) needs to be prepared in a tube-shaped target for prolonged life time during sputtering. To prevent warping and coarsening during preparation, the densification of tube-shaped target need to be achieved at reduced temperature. In this study, tube-shaped 2 wt% Al-ZnO was prepared via two-step sintering route, consisted with initial heat treatment (IHT) at 700 °C or 800 °C under mild external pressure (1 MPa) and subsequent pressureless sintering at 1300 °C or 1350 °C. By applying pressure during the IHT, the density obtained by sintering at 1300 °C increased by 2.38% and reached the same level of density as material sintered at 1350 °C. The reduced sintering temperature rendered a fine grained tube, suitable for prevention of nodules during sputtering. The IHT under external pressure had limited effects for tall tubes, where loss of pressure was anticipated due to the difficulty in fine filling the pressing medium within the mold.

실시간 X-선 산란을 이용한 p-GaN 위에 Ni/Au 오믹 접촉의 산화과정 연구

이성표,장현우,노도영,Lee Sung-pyo,Chang Hyun-woo,Noh Do-young 한국진공학회 2005 Applied Science and Convergence Technology Vol.14 No.3

실시간 x-선 산란기법을 이용해 p형 질화물 위에 성장된 $Ni(400\;\AA)/Au(400\;\AA)$ 박막의 공기 중에서 산화과정 동안 일러나는 구조적인 변화를 조사하였다. 350 "C의 열처리 온도에서 산화과정 동안 니켈과 금 박막들이 서로 섞인다는 것을 확인하였고 금의 회절 프로파일의 우측 부근에서 니켈의 양이 서로 다른 금 고용체의 새로운 상이 형성되는 것을 발견하였다. 또한, 이런 금 고용체에 포함된 니켈 원자는 산화가 더욱 진행함으로써 바깥쪽으로 확산하여 산소와 결합하여 NiO의 새로운 상이 형성되는 것을 알 수 있었다. $650^{\circ}C$의 열처리 온도에서는 완전히 산화가 일어났음에도 불구하고 금(111) 벌크 회절 프로파일에 소량의 니켈 원자가 포함되어 있음을 확인하였다. The structural evolution of $Ni(400\;\AA)/Au(400\;\AA)$ films on p-type GaN during thermal oxidation in ai. was investigated by in situ x-ray scattering experiments. These results indicate that Ni layer and Au layer intermix during thermal oxidation. Au-rich solid solutions containing the different amount of Ni atoms are formed during oxidation. The Ni atoms in Au-rich solid solution out-diffuse as the oxidation proceeds resulting in the formation of NiO(111) phase. Despite of the complete oxidation at $650^{\circ}C$, the position of bulk Au(111) diffraction profile indicates that small amount of Wi atoms are still incorporated in the Au phase.

Blending MEH-PPV Conjugate Polymers with Single-Walled Carbon Nanotubes for Polymer Light-Emitting Diodes

이성표,이철의,이은모,H. Choi,김인묵,장재원,모규현,이규원 한국물리학회 2006 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.48 No.I

We report the eects of blending poly[2-methoxy-5-(2'-ethyl-hexyloxy)-p-phenylene-vinylene] (MEH-PPV) conjugate polymers with single-walled carbon nanotubes (SWNTs). The blend ratio of MEH-PPV/SWNT composites for polymer light-emitting diodes (PLEDs) ranged from 0 wt% to 1 wt% SWNTs. From time-of-°ight (TOF) measurements, the electron mobility was observed to increase gradually with the weight percent of SWNTs while the hole mobility remained almost unchanged. According to the Poole-Frenkel model, an increase in the weight percent of SWNTs lowers the zero-.eld activation energy, suggesting that SWNTs eectively reduce the oxygen trap density. At a 0.2-wt% SWNTs concentration, the electron and the hole mobilities could be tuned for the highest external quantum e±ciency.

비골골절의 비관혈적 정복술 중 사용한 초음파의 유용성

이성표,석정훈,최원석,김태범,양완석 대한두개안면성형외과학회 2008 Archives of Craniofacial Surgery Vol.9 No.1

Purpose: Closed reduction is most common treatment method for nasal bone fracture but it requires secondary correction operation commonly. For preventing secondary revision, we applied ultrasonography during closed reduction of nasal bone fracture and examined the result of operation. Methods: 80 patients were sorted into 2 groups, ultrasound-guided closed reduction group(n=40) and manual closed reduction group(n=40). We classified the unilateral fracture involving lower 1/2 of nasal bone into type I, the bilateral fracture involving lower 1/2 of nasal bone into type III and the fracture of upper 1/2 of nasal bone into type III. The occurrence rate of overcorrection and undercorrection were evaluated by comparing preoperative and postoperative MDCT(Multi Direction Computed Tomography) Results: In manual closed reduction group, overcorrection were found in 4 patients and undercorrection were found in 3 patients. In ultrasound-guided closed reduction group, overcorrection was not observed and undercorrection was observed in 2 patients. Conclusion: Intraoperative ultrasound evaluation of nasal bone fracture resulted in reduced occurrence rate of secondary nasal deformities, showed easier detection of the fractured site and have superiority upon simple physical examination or simple x-ray.

X-Efficiency론에 관한 소고

이성표 牧園大學校 産業經營硏究所 1985 産經硏究 Vol.1 No.-

Stage in the City

이성표 한국청소년시설환경학회 2013 한국청소년시설환경학회 학술대회 Vol.2013 No.1

시에는 오솔길이 있어서

이성표 세상의 모든 시집(시전문지 모든시) 2018 계간 모:든시 Vol.- No.3

작란감집 콩트

李性杓 박문서관 1940 博文 Vol.18 No.-