http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이명의(Lee, Myung-Eui) 한국산학기술학회 2005 한국산학기술학회논문지 Vol.6 No.2
본 논문에서는 오브컴 위성 통신 및 X.400 통신 프로토콜을 이용하여 글로벌 위치 확인 시스템을 구현하는 논문으로 본 시스템은 인터넷을 통해서 전 세계 어디에서나 이동 및 고정 물체의 위치를 확인할 수 있는 양방향 데이터 통신을 제공한다. 본 연구에서는 데이터 통신 링크를 구축하기 위해서 X.400 프로토콜, 그리고 SIP(Serial Interface Protocol) 및 자체 정의한 제어 프로토콜을 사용하였다. GPS 수신기와의 인터페이스를 위하여 사용자 단말기와 연결된 데이터 프로세서도 설계 및 제작하였다. 실시간 실험을 통해서 본 연구에서 제안한 글로벌 위치확인 시스템이 정해진 프로토콜에 따라서 잘 동작하는 것을 확인하였다. The proposed system in this paper is designed to provide users with a means of global location information using Orbcomm satellite communication and XAOO protocol. The system's two-way data transmission capabilities allow users to track mobile or fixed objects anywhere in the world via Internet. This study utilizes the XAOO protocol, and the SIP(Serial Interface Protocol) and self defined control protocol toimplement data communication link in this paper. Data processor board connected to SC(Subscriber Communicator) is also designed and implemented to interface with GPS receiver. The experimental results of the proposed global position location system is evaluated through real-time experiments, and we have confirmed it works well according to the protocol designed in this paper.
가속화용매추출기를 이용한 히드록시프로필인산이전분의 프로필렌클로로히드린 분석방법에 관한 연구
이명자(Myung-Ja Lee),신영민(Yeong-Min Sin),정의한(Eui-Han Jeong),최태진(Tae-Jin Choi),정숙현(Sook-Hyun Chung),안원근(Won-Gun An) 한국식품영양과학회 2002 한국식품영양과학회지 Vol.31 No.4
염소를 함유한 알콜류의 추출 및 분석은 일반적인 알콜류에 비해 비등점이 높아 휘발 또는 증류법을 적용하기 어렵고 특히 히드록시프로필치환전분 중 PCH의 추출은 전분입자와의 에멀션을 형성하므로 어려움이 있다. 따라서 용매를 가온, 가압하여 추출효율을 높이고, 전분의 물성적인 특성으로 인한 여과의 어려움을 해소할 수 있는 가속용매추출기(ASE)를 사용하여 PCH 분석을 하였다. 온도 40~150℃의 변화에 따른 회수율을 측정한 결과 온도 상승에 따라 회수율이 증가하는 경향을 나타내어 120℃에서는 96.1%의 회수율을 나타내었다. 압력 변화에 따른 추출효율을 검토한 결과 1500 psi까지는 압력 상승에 따른 회수율의 증가가 뚜렷하여 93.6%였으나 이후에는 완만하게 증가하여 2500 psi에서는 96.1%로 나타났다. 추출용매(초산에틸, 메탄올, 아세톤, 디에틸에테르 및 헥산)에 따른 PCH의 회수율을 측정한 결과 아세톤, 디에틸에테르, 초산에틸은 94% 이상의 회수율을 나타내었고 메탄올 87.3%, 헥산 14.1%로 나타났다. RSD(%)는 초산에틸이 5.6%로 가장 우수하였다. ASE를 이용한 히드록시프로필치환 전분 중 PCH의 최적 추출조건은 온도, 120℃; 압력, 2500 psi; 추출용매, 초산에틸; static time, 50분; purge time, 300초; heating time, 5분; flush(%), 100 mL 였으며, 이때 회수율은 96.1%이었다. Accelerated solvent extraction (ASE) was used for a rapid and simple extraction of propylenchlorohydrin (PCH) residue in hydroxylpropyl modified starch. The effects of temperature, pressure and extraction solvent on the extraction efficiency were investigated to find the optimal condition of ASE. The optimal conditions for PCH extraction in hydroxylpropyl modified starch were static time of 50 min, purge time of 300 sec, heating time of 5 min, temperature of 120℃, pressure of 2500 psi, flush (%) with 100 volumes, and ethylacetate as an extraction solvent. The recovery (96.1%) of this method was higher than that (76.4%) of Code of Food Additive. Therefore, the ASE was a good method in both aspects of efficiency and effectiveness.
네트워크 기반의 교육용 컨텐츠를 위한 동영상 저장시스템 개발
이명의(Myung Eui Lee) 대한공업교육학회 2001 대한공업교육학회지 Vol.26 No.2
In this paper, we deal with a network-based digital video archiving system because multimedia contents are versatile way for various educational purpose via Internet including remote education system, educational multimedia data base, and video answering machine. Such a 100 Mbps ethernet-based video archiving system has been realized experimentally by using the Moving Pictures Experts Group(MPEG) encoder board that support audio and video compression and the hardware video switcher that is used for 4-channel video input sources. Programming example applicable to video archiving system for educational contents is proposed, and some experimental results are measured in this example.
CDMA 모뎀을 이용한 원격 제어 및 계측 시스템 구현
이명의 ( Myung Eui Lee ) 한국항행학회 2012 韓國航行學會論文誌 Vol.16 No.2
본 논문에서는 CDMA 데이터 모뎀을 이용하여 원격에서 다양한 입출력 장치들의 상태를 계측하거나 이들을 제어하는 시스템을 설계하고 개발한다. 그리고 TCP/IP 패킷 통신과 단문자서비스(SMS) 통신방식을 이용하여 공인 IP 주소를 갖지 않는 CDMA 모뎀 장치들을 위한 양방항 데이터 통신 방식을 제안한다. 설계된 원격 제어 및 계측시스템은 DCE로 Telit WM-800 모뎀과 DTE로서 Atmel AT89C51 마이크로컨트롤러를 사용하여 구현되었다. 제어 및 계측 시스템 사용자를 위한 사용자 응용 프로그램, 그리고 디지틀 입출력 장치, AD/DAC, LCD, 및 온습도 센서 등의 펌웨어 구동장치 프로그램은 보다 다양한 종류의 응용을 위하여 각각 Microsoft C 및 Keil C 언어를 사용하여 작성되었다. 본 논문에서 구현된 제어 및 계측 시스템의 실험결과는 실제 실시간 실험을 통해, 설계된 바와 같이 사용자가 원하는 동작을 정확하게 수행하는 것을 확인하였다. This paper deals with the design and development of the remote control and measurement systems using CDMA(Code Division Multiple Access) data modem. We propose a bi-directional data communication link without the public IP address in CDMA modem device by the TCP/IP packet and SMS(Short Message Service) communication. The remote control and measurement systems are implemented by a Telit WM-800 modem as DCE(Data Communication Equipment), and Atmel AT89C51 microcontroller as DTE(Data Terminal Equipment). The user application software for the control and measurement system user, and the firmware software of device drivers for peripherals such as a digital input/output device, AD/DAC(Analog to Digital/Digital to Analog Converter), LCD, and temperature/humidity sensor are written in Microsoft C and Keil C language respectively for further various applications. The experimental result of the proposed control and measurement systems implemented in this paper is evaluated via real-time experiments, which works well as designed.
원격 제어 및 계측을 위한 임베디드 웹 서버 시스템 구현
이명의 ( Myung Eui Lee ) 한국항행학회 2012 韓國航行學會論文誌 Vol.16 No.5
본 논문에서는 임베디드 웹 서버(Embedded Web Server)를 이용하여 원격에서 다양한 입출력 장치들의 상태를 계측하거나 이들을 제어하는 시스템을 설계하고 개발한다. 설계된 원격 제어 및 계측시스템은 Cortex-M3ARM 마이크로컨트롤러를 사용하여 구현되었으며, 제어 및 계측 시스템 사용자를 위한 사용자 응용 프로그램, 그리고 디지틀 입출력 장치, AD/DAC, LCD 및 온습도 센서 등의 구동장치 프로그램 및 이벤트 처리를 위한 웹서버 프로그램을 구현하였다. 각각의 프로그램은 Eclipse 개발환경을 구축하여 Codesourcery C 언어, Java script, 그리고 HTML 언어를 사용하여 작성되었다. 본 논문에서 구현된 제어 및 계측 시스템의 실험결과는 실제로 실시간 실험을 통해, 설계된 바와 같이 사용자가 원하는 동작을 정확하게 수행하는 것을 확인하였다. This paper deals with the design and development of the remote control and measurement systems by Embedded Web Server. The remote control and measurement systems are implemented by Cortex M-3 ARM micro-controller. The user application software for the control and measurement system user, and the firmware software of device drivers for peripherals such as a digital input/output device, AD/DAC(Analog to Digital/Digital to Analog Converter), LCD, and temperature/humidity sensor are developed in Eclipse environment using Codesourcery C, Java script, and HTML. The experimental result of the proposed control and measurement systems implemented in this paper is evaluated via real-time experiments, which works well as designed.