http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Content-Length 통제기반 HTTP POST DDoS 공격 대응 방법 분석
이대섭(Dae-seob Lee),원동호(Dong-ho Won) 한국정보보호학회 2012 정보보호학회논문지 Vol.22 No.4
OSI 7계층 DDoS 공격 기법중 하나인 HTTP POST DDoS 공격은 서버의 자원을 고갈시켜 정상적인 서비스를 방해하는 서비스 거부 공격 기법이다. 이 공격은 적은 양의 공격 트래픽만으로도 효과적인 공격이 가능하며 정상적인 TCP 연결을 이용하고 있어 정상적인 사용자 트래픽과 공격 트래픽을 구분하는 것이 어렵다. 본 논문에서는 HTTP POST DDoS 공격에 대한 대응 방안으로 비정상 HTTP POST 트래픽 탐지 알고리즘과 HTTP POST 페이지별 Content-Length 제한기법을 제안한다. 제안한 방안은 HTTP POST 공격도구인 r-u-dead-yet과 자체 개발한 공격 도구를 이용하여 HTTP POST DDoS 공격을 오탐 없이 탐지 대응하였음을 보여주었다. One of the OSI 7 Layer DDoS Attack, HTTP POST DDoS can deny legitimate service by web server resource depletion. This Attack can be executed with less network traffic and legitimate TCP connections. Therefore, It is difficult to distinguish DDoS traffic from legitimate users. In this paper, I propose an anomaly HTTP POST traffic detection algorithm and http each page Content-Length field size limit with defense method for HTTP POST DDoS attack. Proposed method showed the result of detection and countermeasure without false negative and positive to use the r-u-dead-yet of HTTP POST DDoS attack tool and the self-developed attack tool.
모바일 환경에서 블루투스를 위한 비대칭 암호기반의 개선된 상호인증 기법
이대섭(Lee, Dae-Seop),박태성(Park, Tae-Sung),전문석(Jeon, Mun-Seok) 한국산학기술학회 2010 한국산학기술학회 학술대회 Vol.- No.-
블루투스(Bluetooth)는 별도의 인증 기관 없이 각 디바이스간의 독립적인 인증과정을 통해 데이터를 서로 전송하는 기술을 사용하고 있다. 바로 이러한 특징 때문에 인증 기반 기관을 이용한 네트워크에서 발생하는 문제점과는 다른 특징을 가진 문제점들이 나타날 수 있으며, 그 외에도 부인방지나 무결성이 제공되지 않아 스마트단말기의 경우 많은 취약점이 될 수가 있다. 본 논문에서는 이러한 블루투스 암호화 인증과정의 취약점을 보완하고자 비대칭키 암호화기법을 활용한 전자서명기법과 대칭키 암호화기법을 사용하여 향상된 블루투스 암호화 인증과정을 제안한다.
2륜 및 4륜차 사이드 미러의 LED Cover 금형 최적 설계 연구
이대섭(Daesuep Lee),배재상(Jaesang Bae),오재춘(Jaechun Oh),장일주(Ilju Jang) 한국자동차공학회 2010 한국자동차공학회 학술대회 및 전시회 Vol.2010 No.11
There are so many parts like mechanics, electrics, and so on in automobile. In modern times, according to the lightweight of automobile, engineering plastics parts are used to make by injection molding method. Additionally, many points of parts of 2 wheel and 4wheel Automobile are made not machining but injection molding with engineering plastics. Especially, if parts made by injection mold make the difficult shapes like slant surface, it must be used to the slide core at injection mold. Generally, it is used to the slide core with the oil pressure cylinder. But, that is not good for productivity and cost to make parts. So, it must be used to one-body injection mold although difficult to design that. In this study, to make the slant surface of reflector to install the LED board of side mirror at automobile, it was designed the optimum injection mold. It was used to Pro/E for the design of one-body injection mold and Mold flow for injection molding analysis.
2륜 및 4륜차 범퍼의 센서 장착을 위한 펀칭 최적화 공법 연구
이대섭(Daesuep Lee),김종석(Jongsuk Kim),최종용(Jongyong Choi),이정휘(Junghwi Lee) 한국자동차공학회 2010 한국자동차공학회 학술대회 및 전시회 Vol.2010 No.11
Recently, Front Warning Sensor and Back Warning Sensor installed with Driver’s safety system in 2wheel and 4wheel automobile are adopted with standard specifications. The initial time, those sensors were the protruding shape. But, Sensor is changed to Not-protruding type step by step, due to the failure of sensor, improvement design and so on. So, when the type of sensor and assembling method are changed, the process installing sensor must be changed. For the process of installation, protruding type is the order of injection molding, painting, final machining and assembling. Not-protruding type is the order of injection molding, final machining, painting and assembling. So, When it punches holes in bumper for installing sensor, Not-protruding type has the problems like formation of painting and tearing out plastics. In this study, after comparing with oil-air pressure punching system and supersonic punching system, it will suggest the definition and the process of supersonic punching system optimized for good quality of sensor’s hole.
이대섭(Lee Dae Seob),홍원순(Hong Won Soon) 한국정보보호학회 2007 情報保護學會誌 Vol.17 No.6
정보보호제품의 안전성 및 신뢰성이 검증된 제품의 공급 및 이용 촉진을 위해 운영되고 있는 정보보호제품 CC 인증제도, 암호제품에 대한 암호 검증제도, 공공기관 도입 정보보호제품에 대한 보안적합성 검증제도 등에 대한 현황 및 향후 추진방향을 살펴본다.
『한국형 ODA 모델』중 농림업 분야 국제협력 프로그램 심화 연구(2차년도)
이대섭(Lee Daeseob),허장(Heo Jang),이윤정(Lee Yoonjung),김윤정(Kim Yunjung),박성재(Park Sungjae),김관수(Kim Kwansoo),박재홍(Park Jaehong),우수영(Woo Suyoung),이학교(Lee Hakkyo) 한국농촌경제연구원 2015 한국농촌경제연구원 기본연구보고서 Vol.- No.-
연구의 배경 2010년 OECD/DAC 가입 이후 우리나라는 기존의 공여국과 차별화되는 우리나라의 비교우위에 입각하여 ‘한국형 ODA 모델’을 도입하였다. 개발협력 대상국의 빈곤퇴치와 지속가능한 농촌 발전을 위하여 국제적 원조규범을 존중하고 우리의 개발협력 여건을 고려하며 개발협력국 실정에 맞는 농림업 분야 국제개발협력의 수요가 늘어나고 있다. 이 연구는 ‘한국형 ODA 모델’ 중 농림업 분야 협력프로그램의 콘텐츠를 현실성 있게 보완하여 개도국에 적용 시 그 효과성을 제고할 수 있도록 할 필요가 있다는 배경 아래 수행되었다. 연구방법 이 연구는 ‘한국형 ODA 모델’ 중 농림업 분야의 프로그램에 대한 콘텐츠를 심화하기 위하여 2년간 시행한 연구사업의 최종 결과물이다. 이 분야 20개 협력 프로그램 가운데 5개 프로그램(농촌종합개발, 농업기술 개발 및 현장지도 지원 시스템, 농업생산기반, 식량작물 생산성 향상, 농산물 가공)은 첫해인 2014년에 수행되었다. 2015년에는 ‘한국형 ODA 모델’ 의 나머지 14개의 프로그램을 11개의 프로그램으로 통합하여, 이 중 5개의 프로그램은 외부 전문가에게 집필을 의뢰하여 수행하였다. 이 연구는 농림업 분야의 협력 프로그램의 전략서로서 대상국 개발협력에 적용 가능성을 높이기 위하여 과거 우리나라의 농정경험뿐만 아니라 국내외 개발협력 프로그램의 사례 등을 제시하고 이를 통해 개도국 적용 시 고려해야 할 착안점을 제시하고 있다. 연구결과 및 시사점 이 보고서는 11개 프로그램의 총괄보고서로서, 각 프로그램별로 한국의 시대별 농정변화, 한국의 국제협력사례, 국제기구의 협력사례 및 개도국 적용을 위한 착안점을 포함하여 제시하고 있다. 이 보고서와 별도로 작성된 각 프로그램별 보고서는 시대 흐름에 따른 우리나라의 정책적 변화를 기술하고 다양한 정책의 성패를 분석하여 시사점을 도출하고 있다. 국내외 개발협력 프로그램 사례를 제공하고 성패요인 분석 및 출구전략, 착안점을 제시함으로써 국제개발협력 시 유관기관에서 참고할 수 있도록 하는 것이 이 연구의 목적이다. 2014년 5개의 프로그램 보고서를 포함한 16개의 프로그램 보고서는 개발협력 대상국의 농업분야 협력사업의 발굴, 세부사업 선정 그리고 사업의 수행 시 참고자료로서 활용도가 높을 것이며, 농림축산식품부를 비롯한 유관기관에게도 관련 정책 수립의 기초자료로 활용할 수 있을 것이다. Background of Research Since Korea became a member of OECD/DAC in 2010, it has introduced so-called “Korean ODA Model” which would serve as a strategic guideline for development cooperation. It is intended to be a unique model differentiated from ones in other countries. There are increasing demands toward agricultural and rural development projects for poverty eradication and sustainability which are right both to the international aid norms and socio-political conditions of Korea. This research tries to enhance the effectiveness through complementing contents of cooperative programs in the Korean ODA Model. Method of Research Under the same background and research purpose, five programs-agricultural R&D and extension system, integrated rural development, agricultural production infrastructure, crop productivity, and agricultural processing- were covered by the research in 2014. The rest fourteen programs are consolidated into eleven programs, which are the topics of this research. It provides not only policy experiences of Korea in the fields of agriculture but implications for application to the context of partner countries. Research Results and Implications As a synthesizing report which sums up all eleven program reports, this research reviews agricultural policy changes in Korea by periods, and development cooperation project cases, and then it offers key points for application to the developing countries. Program reports describe policy changes related with each sector, analyze the factors of success and failure, and derive implications and exit strategies. It will be useful to partner countries which are currently in need of policy transformation, and the project implementing agencies as well. Sixteen program reports from two-year research will serve as basic references for those authorities and organizations concerned such as the Ministry of Agriculture, Food and Rural Affairs (MAFRA) in their formulation of cooperative projects, identification of needs and activities, and project implementation.