http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오늘 본 자료
버너 출구 형상 및 혼합방식이 예열에 미치는 실험적 연구
이경욱(Kyungwook Lee),김인수(Insu Kim),이영재(Youngjae Lee),김만영(Manyoung Kim) 한국연소학회 2013 KOSCOSYMPOSIUM논문집 Vol.2013 No.12
An experimental study was performed to investigate the effect of burner nozzle exit geometry and fuel/air mixing patterns on flame shape and its temperature. A conventional field burner and those of improved. Which had a swirler and asymmetric burner nozzle exit, were tested. A premixed type burner with an asymmetric burner exit and a swirler showed the shortest flame length. It also showed that temperature had been increased up to 8% compared than that of a conventional premixed type burner with symmetric burner exit which had no swirler.
핀틀이 적용된 고온 가스 밸브의 복합열전달 해석에 관한 연구
이경욱(Kyungwook Lee),허선욱(Seonuk Heo),권세진(Sejin Kwon),이종광(Jongkwang Lee) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.11
핀틀이 적용된 고온 밸브 해석에서 수치해석 방법과 계산영역이 미치는 영향을 확인하기 위한 연구를 수행하였다. 격자 민감도를 확인하기 위해 100,000~1,700,000 개의 격자에 대해 계산을 수행 하였다. 계산 영역을 설정함에 있어 외부 대기 영역은 유동과 온도에 큰 영향을 미치지 않았다. 각각의 난류모델 Spallart-Allmaras, RNG k-ε, k-ω SST에서 추력 값은 동일하였지만 온도 분포에서 5% 이내의 오차가 존재 하는 것을 확인 할 수 있었다. iteration/time step에 따른 영향을 확인하기 위하여 비정상상태 해석을 수행하였다. 각각의 경우에서 유의미한 차이는 존재 하지 않았다. Numerical simulations of the hot gas valve with a pintle have been conducted in order to investigate the effect of numerical methods and computational domains. The grid sensitivity is checked by varying the grid number from 100,000 to 1,700,000. The existence of ambient region doesn"t make the significant differences of the flow-field and the temperature distribution. Three turbulence models are adopted to figure out its influence on the thrust and temperature distribution: Spallart-Allmaras, RNG k-ε, k-ω SST. The thrusts of the hot gas valve are almost same in all cases of the simulation, however, there are about 5% errors in the temperature distribution. Transient analysis have been conducted in order to investigate the effect of iteration/time step. There was no significant difference in each case.
이경욱(Kyungwook Lee),허선욱(Seonuk Heo),권세진(Sejin Kwon),이종광(Jongkwang Lee) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.5
고온 밸브 비정상상태 해석 기법을 확립하기 위한 연구를 수행하였다. 해석의 경제성을 고려하여 time step size와 iteration을 선정하였다. 고온밸브의 작동시간을 감안하여 4구간에 걸쳐 time step size를 증가시켜 비정상상태 해석을 수행하였다. 각 구간에서 정량적 결과가 3%이내의 차이를 보일 때 time step size를 증가시켰다. 유동장은 8 ms, 압력장은 100 ms, 유동영역의 온도장은 5.5 sec에서 정상상태와 3%이내의 차이를 가졌다. 고온 밸브의 작동 시간인 10 sec에서 유동장, 압력장, 유동영역의 온도장은 정상상태에 도달하였지만 고체영역의 온도장은 정상상태와 7% 차이가 존재하였다. Numerical simulations of the hot gas valve have been conducted in order to establish the transient analysis method. Time step size and iteration were chosen for economical analysis. Transient analysis has been conducted by increasing the time step size throughout the four sections considering the operating time of the hot gas valve. Time step size was increased when quantitative result reached within 3% difference in each section. Flow field, pressure field, temperature field in flow area were reached steady state with within 3% difference at 8 ms, 100 ms and 5.5 sec respectively. Flow field, pressure field, temperature field in flow area were reached steady state at 10 sec from operating time of the hot gas valve, however, there are about 7% difference in the temperature field in solid area.
이경욱(Kyungwook Lee),허선욱(Seonuk Heo),권세진(Sejin Kwon),이종광(Jongkwang Lee) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.5
수치해석 방법과 계산영역의 영향을 확인하기 위해 상용 코드 Fluent를 이용하여 핀틀이 적용된 고온밸브의 유동장 해석을 수행 하였다. 계산 영역의 변화는 유동과 온도에 거의 영향을 미치지 않았다. 각각의 난류모델 Spallart-Allmaras, RNG k-ε, k-ω SST에서 추력 값은 동일하였지만 온도 분포에서 약간의 차이가 존재 하는 것을 확인 할 수 있었다. Numerical simulation of hot gas valve with pintle have been investigated in order to identify the effect of numerical methods and computation domain. The effectiveness of computation domain was weak in flow and temperature field. Although the turbulence models, such as Spallart-Allmaras, RNG k-ε and k-ω SST, lightly influence the temperature field, the difference of thrust among the turbulence models was not noticeable.
핀틀이 적용된 고온 가스 밸브 유동장 해석 기법에 관한 연구
이경욱(Kyungwook Lee),허선욱(Seonuk Heo),권세진(Sejin Kwon),이종광(Jongkwang Lee) 한국추진공학회 2015 한국추진공학회지 Vol.19 No.6
Numerical simulations of the hot gas valve with a pintle have been conducted in order to investigate the effect of numerical methods and computational domains. The grid sensitivity is checked by varying the grid number from 100,000 to 1,700,000. The existence of ambient region doesnt make the significant differences of the flow-field and the temperature distribution. Three turbulence models are adopted to figure out its influence on the thrust and temperature distribution: Spallart-Allmaras, RNG k-ε, k-ω SST. The thrusts of the hot gas valve are almost same in all cases of the simulation, however, there are about 5% difference in the temperature distribution. With the ambient region, the difference are observed in the temperature distribution with respect to the number of grids.
이경욱(Kyungwook Lee),허선욱(Seonuk Heo),박연정(younjung Park),권세진(Sejin Kwon),이종광(Jongkwang Lee) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.12
작동시퀀스에 따른 고온밸브의 특성을 확인하기 위한 연구를 수행하였다. 고온밸브 해석에는 고온밸브가 정지 없이 작동하는 경우, 1초 작동 후 1초 정지하는 경우, 1초 작동 후 2초 정지하는 경우의 작동 시퀀스가 적용되었다. 작동 시퀀스에 따라 고온밸브의 최종작동시간 10초에서 유동장 분포는 유의차가 존재하지 않았다. 하지만 고체영역의 온도분포에는 유의차가 존재하였다. 작동시퀀스에 따라 핀틀 헤드부에서는 최대 6.9%의 차이가 존재하였고 레늄노즐부에서는 최대 10.9%의 차이가 존재하였다. Numerical simulations of the hot gas valve have been conducted according to operating sequence. In the analysis of the hot gas valve, three case of operating sequence were applied to see the effect of operating sequence. According to the operating sequence, there are no significant difference in the flow field at 10 second of the final operating time of hot gas valve. However, there was a significant difference in the temperature distribution in the solid area. According to the operating sequence, there was a maximum difference of 6.9% in the pintle head part and 10.9% in the rhenium nozzle part.