http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저비용 RFID 인증을 위한 PUF 기반 암호화 프로세서와 상호 인증 프로토콜 설계
최원석(Wonseok Che),김성수(Sungsoo Kim),김용환(Yonghwan Kim),윤태진(Taejin Yun),안광선(Kwangseon Ahn),한기준(Kijun Han) 한국통신학회 2014 韓國通信學會論文誌 Vol.39 No.12(네트워크)
RFID 시스템은 무선 통신을 이용하여 운용되기 때문에 외부의 불법적인 공격에 노출되어 있으며 이에 대한 시스템 침해의 위험성이 높다. 이러한 공격들에 대한 보안 기법들 중 PUF 기반의 인증 기법이 존재한다. 그러나 기존의 PUF 기반 기법들은 해쉬나 AES 알고리즘을 함께 이용하기 때문에, 비용 및 성능적인 측면에서 저비용 RFID 태그에 적합하지 않다. 본 논문에서는, 저비용 RFID 인증을 위하여 PUF 기반 암호화 프로세서와 이를 이용한 상호 인증 프로토콜을 제안한다. PUF의 challenge-response 쌍들을 인증키로 활용하고, 이를 PUF의 특성을 이용하여 암호화함으로써 해쉬 및 AES 등의 알고리즘 사용을 배제하였다. 매 세션마다 변경되는 암호화 방법과 일회성 난수를 이용한 XOR 연산 기법을 활용함으로써 공격자의 challenge-response 쌍에 대한 분석을 차단하여 시스템 공격을 무력화 시킨다. 또한, PUF 특성으로 인하여 물리적 공격에 강하고 태그에 저장된 인증 데이터가 존재하지 않기 때문에 물리적 공격에 의한 태그 복제 위험을 방지한다. 제안된 PUF 기반의 암호화 프로세서는 저비용으로 구현되며 저면적 및 저전력의 특징을 갖는다. The attacker can access the RFID systems illegally because authentication operation on the RFID systems are performed in wireless communication. Authentication methods based on the PUF were presented to defend attacks. Because of Hash and AES, the cost is expensive for the low-cost RFID tag. In this paper, the PUF-based encryption processor and the mutual authentication protocol are proposed for low-cost RFID authentication. The challenge-response pairs (PUF"s input and output) are utilized as the authentication key and encrypted by the PUF"s characteristics. The encryption method is changed each session and XOR operation with random number is utilized. Therefore, it is difficult for the attacker to analyze challenge-response pairs and attack the systems. In addition, the proposed method with PUF is strong against physical attacks. And the method protects the tag cloning attack by physical attacks because there is no authentication data in the tag. Proposed processor is implemented at low cost with small footprint and low power.
이재강(Jaekang Lee),오세진(Sejin Oh),정경호(Kyungho Chung),윤태진(Taejin Yun),안광선(Kwangseon Ahn) 한국산업정보학회 2013 한국산업정보학회논문지 Vol.18 No.4
플래시 메모리는 비휘발성, 저전력, 빠른 입출력, 충격에 강함 등과 같은 많은 장점으로 스마트 기기 및 임베디드 시스템의 저장매체로 많이 사용되고 있다. 낸드(NAND) 플래시에 사용되는 파일시스템(File System)은 대표적으로 YAFFS2, JFFS2, UBIFS 등이 있다. 본 논문에서는 최근 리눅스 커널에 포함된 UBIFS 파일시스템에 메모리 할당을 달리하여 I/O 성능을 실험한다. 제안한 I/O 성능 분석은 순차접근 방법과 랜덤접근으로 분류하고, 메모리 할당은 kmalloc(), vmalloc(), kmem_cache()를 사용하여 6가지 유형으로 나누어 실험하였다. 실험을 통하여 6가지 유형 중 UBI 서브시스템과 UBIFS에 vmalloc()과 kmalloc()을 적용한 2번째 유형이 순차읽기 12.45%, 순차다시쓰기 11.23%의 빠른 성능을 보였으며 랜덤 읽기에는 7.82% 랜덤 쓰기에서는 6.90%의 성능 향상을 보였다. Flash memory is mostly used on smart devices and embedded systems because of its nonvolatile memory, low power, quick I/O, resistant shock, and other benefits. Generally the typical file systems base on the NAND flash memory are YAFFS2, JFFS2, UBIFS, and etc. In this paper, we had variously made an experiment regarding I/O performance using our schemes and the UBIFS of the latest Linux Kernel. The proposed I/O performance analyses were classified as a sequential access and a random access. Our experiment consists of 6 cases using kmalloc(), vmalloc(), and kmem_cache(). As a result of our experiment analyses, the sequential reading and the sequential rewriting increased by 12%, 11% when the Case 2 has applied vmalloc() and kmalloc() to the UBI subsystem and the UBIFS. Also, the performance improved more by 7.82%, 6.90% than the Case 1 at the random read and the random write.