http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤창한,권영배,Yun, Chang-Han,Gwon, Yeong-Bae 한국기계연구원 1984 기계연구원소보 Vol.13 No.-
In order to obtain the high resilience, low compression set and less of hardness change in the wiper blade rubber, vulcanization system and receipes must be controlled. To improve the above the above Physical properties, the system should be taken as follows. i) peroxide vulcanization system and sulfur vulcanization system. ii) rubber having more cis-form than trans-form. iii) moderate particle size cabon black. v) usage of other improvement agent. The rubber blade with 4.4% compression set, 76% resilience, Hs 0 $\pm$ 2 hardness change could be abtained through vulcanization system, In addition, the surface of wiper blade must be treated by chemically and physically to minimize for the skid and friction.
김정인(Jung-In Kim),윤창한(Chang-Han Yun),윤형선(Hyung-Sun Yoon) 한국청정기술학회 2010 청정기술 Vol.16 No.3
본 논문은 생태효율성 지표 작성을 통하여 여수산업단지(여수산단) 지표를 개발하였다. 여수산단 매출의 경우 원화의 가치와 원부원료의 수출입 원가 변동 폭이 큰 관계로 제품의 가치(기능)에서 제외하고 대신 총 생산액, 에틸렌 생산량, 경질유 생산량으로 제품의 기능 부문을 구성하고, 환경부하로서는 현재 공식적으로 입수 가능한 자료인 전력 소모량, 용수 사용량 및 폐수 배출량을 사용하였다. 2004년을 기준으로 할 때 2006년의 환경경제효율 지수를 계산한 결과 0.954로 지수가 나빠졌으나, 여수산단의 생태산업단지사업이 성공할 경우 2015년에는 지수가 1.153으로 약 15% 정도 개선될 것으로 예측되었다. The industrial ecology indicators(IEI) for Yeosu Industrial Park were developed using eco-efficiency indicator(EEI). The key factors for the creation of IEI were two parts. One part is the value of the products which is selected as the total production value, the amount of ethylene production, the amount of light oil production instead of the total sales volume for Yeosu Industrial Park, since the currency exchange and the price of raw materials varied every year. The other part is the environmental burden. The electric consumption, the industrial water consumption, and the amount of discharged waste water are all officially opened to the public, were used in the calculation. Based on the value for the year of 2004, the IEI value for 2006 became worse to 0.954, but, was expected to be 1.153, a 15% improvement, for 2015 if the current EIP project is successfully performed.
CMSMPR 결정화기의 시동특성 연구(1) : Population 수지식에 의한 근사해법
이철수,신영준,윤창한 한국화학공학회 1984 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.22 No.1
NaCl-에탄올-물 염석계의 CMSMPR結晶化器에서 소금의 結晶化에 대한 始動特性을 硏究하였으며 定常狀態와 始動狀態를 모두 만족할 수 있는 結晶化速度 모델에 대하여 硏究하였다. 지금까지 結晶化速度는 일반적으로 定常狀態에서의 結晶粒度分布로부터 얻어지고 있으나 動特性을 解析함에 있어서는 이러한 速度式들이 약간의 문제점을 지니고 있음이 확인된 바 있고 지금까지 계속 硏究中인 것으로 사료된다. 특히 1, 2次 核生成이 모두 중요한 역할을 하는 始動狀態에서의 速度式들에 대하여는 지금까지 연구된 바가 없다. 따라서 本 硏究에서는 始動狀態에 적용될 수 있는 보다 실제적인 核生成모델을 제안하였으며 이 모델을 利用하여 結晶粒度分布를 Population收支式으로부터 계산하여 실험치와 비교하였다. Start up behavior of NaCl-Ethanol-Water salting out system in a CMSMPR (Continuous Mixed Suspension Mixed Product Removal) crystallizer was investigated using kinetic equations and the population balance equation. While the kinetic equations can be defined experimentally from steady state crystal size distribution, lack of sensitivity in previously analyzed steady state data resulted in two problems for fitting start up data: (1) absence of homogeneous nucleation effect which should be important in start up, (2) absence of size dependence effect of growth function for very small particle sizes. By simultaneously fitting start up data and steady state data, more realistic kinetic equations were obtained.