RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • SCOPUSKCI등재

        비균일 열전도성 반응블럭의 반응특성 연구

        박성호,윤여일,김성현 ( Seong Ho Park,Yea Il Yoon,Sung Hyun Kim ) 한국공업화학회 1997 공업화학 Vol.8 No.5

        암모니아와 금속염과의 기-고 반응을 이용한 화학열펌프에서 열전달 특성과 물질전달 특성을 개선하기 위하여 금속염을 팽창흑연에 반지름 방향으로 겉보기 밀도가 증가하도록 함침시켜 새로운 비균일 열전도성 반응블럭을 제조하였다. 이것은 겉보기 밀도가 반지름 방향으로 165, 222, 279, 337, 394(kg/m³)로 증가하도록 만든 것으로 균일 열전도성 반응블럭과 반응특성을 비교하였다. 실험결과 열전달특성은 비균일 열전도성 반응블럭이 훨씬 좋았고, 반응을 반복함에 따라 물질전달과 반응특성이 개선되었으며 반응의 재현성도 양호함을 알 수 있었다. The nonuniform thermal conductive reaction blocks were manufactured by impregnation of metal salts on the expanded graphite to improve the heat and mass transfer ability of reaction block for the chemical heat pump using the reaction of ammonia and metal salts(halide). The nonuniform blocks were designated to increase apparent density, like 165, 222, 279, 337, 394 kg/m³ radially. The experimental results showed that the heat transfer characteristics of nonuniform blocks were better than uniform blocks. As the reaction of ammonia repeated, the volumetric expansion in the reaction block makes the mass transfer improve, and the reproducibility better.

      • SCOPUSKCI등재

        H<sub>2</sub>S제거를 위한 아연계 탈황제 제조 및 반응특성 연구

        이창민,윤여일,김성현,Lee, Chang Min,Yoon, Yea Il,Kim, Sung Hyun 한국공업화학회 1999 공업화학 Vol.10 No.2

        Zinc-based sorbents for $H_2S$ removal were prepared. The reactivity of sorbents was investigated by the successive cycles of sulfidation-regeneration at $650^{\circ}C$ in a fixed bed reactor. The desulfurization sorbents were prepared with granulation method to produce a spherical pellet with good attrition resistance. The fresh and reacted sorbents were characterized by X-Ray Diffraction (XRD) and X-Ray Photoelectron Spectroscopy (XPS) and the characteristics of sorbents on calcination conditons were analysed by Mercury Porosimetery and BET. The reactivity of sorbents decreased as the number of sulfidation-regeneration cycle increased. It is due to the zinc loss and the increase of the diffusion resistance by sintering, cracking and spalling of sorbents at the high temperature. $H_2S$를 제거를 위한 아연계 복합금속산화물 탈황제를 제조하고 반응특성을 연구하였다. 최적 황화반응 온도인 $650^{\circ}C$의 고정층에서 탈황-재생의 연속 cycle에 따른 반응성을 관찰하였다. 내마모성 향상을 위한 구형입자의 탈황제를 제조하기 위해 Granulation방법을 이용하였다. XRD와 XPS분석에 의해 zinc titanate결정생성을 확인하였고 소성조건에 따른 탈황제의 특성을 분석하기 위해 mercury porosimetry와 BET분석을 행하였다. Cycle이 증가함에 따라 고온에서의 zinc loss와 sintering, cracking, 그리고 spalling에 의한 탈황제의 확산저항의 증가로 인해 반응성은 떨어졌다.

      • SCOPUSKCI등재
      • 천연망간광석을 이용한 건식 탈황제의 반응특성연구

        윤여일,김명욱,김성현 한국공업화학회 1999 응용화학 Vol.3 No.1

        A natural manganese ores were selected as the raw material of the desulfurization sorbents because of a many useful component for desulfurization and economic merits. The experiments were performed to investigate the reactivity of the sulfidation and regeneration in a fixed bed reactor and were characterized by using the XRD and TGA. But, it was prepared with mixing additives to raise it because the regeneration efficiency was poor.

      • SCOPUSKCI등재

        고정층 반응기에서의 고온건식 탈황공정 모사에 관한 연구

        김성현,신상백,윤여일 한국화학공학회 1998 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.36 No.5

        석탄가스에 포함되어 있는 황화수소를 제거하기 위한 우수한 탈황제로 아연계 및 철계 탈황제를 선정하였고, 이들 탈황제의 성능을 모사가스를 이용하여 고정층에서 400-700℃ 온도범위에서 평가하였다. 그리고, 고정층 실험에 의해 구해진 황화수소 파괴곡선을 grain mode과 unreacted core model을 이용하여, 유효확산계수를 조절 가능한 변수로 선택하여 fitting 하였다. 두 모델 모두 실험에 의해 구해진 파괴곡선과 비교적 잘 일치되는 파괴곡선을 보여주며, 이를 통해 각 탈황제에 대한 유효확산계수를 Arrhenius식 형태로 나타냄으로써 생성물층을 통한 확산에 대한 겉보기 활성화 에너지와 빈도인자를 구하였다. Zinc and iron-based sorbents were considered as prime candidate sorbents to remove H₂S in coal-derived gas. The performance of sorbents was tested at temperature range of 400-700℃, in a fixed-bed reactor using the simulated coal gas, Ten, the effective product-layer diffusion coefficient, D_e was estimated from the best-fittings of the experimental breakthrough curves and simulated breakthrough curves by the grain model and unreacted care model, respectively. These two models showed that the predicted and experimental breakthrough curves were in goad agreement. Apparent, activation energies and frequency factors were obtained for the product-layer diffusion coefficient of various sorbents by plotting in Arrhenius farm.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼