RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • 가스침탄에 의한 Spur Gear의 치형변형

        윤선일 울산과학대학 1983 연구논문집 Vol.8 No.1

        본 논문에서는 가스침탄을 행함에 따른 유한치폭을 가진 평치차의 치형변형에 대하여 고찰하였다. 실험 결과 침탄후의 치형은 침탄전과 비교해서 압력각이 증가하는 방향으로 변형되었고, 그 변형량은 침탄과정에서의 탄소농도 차에 따라 달라졌다. The purpose of this paper is to study the tooth profile deviation of spur gear with finite face width after gas carburizing. As a result of the expeaiment the tooth profile of spur gear after gas carburizing was deviated forwards the direction to increase the pressure angle of tooth profile. And the amount of deviation depended upon the difference of carbon thickness in the course of gas carburizing.

      • KCI등재

        내원 경로에 따른 급성 수면제 및 진정제 중독의 임상 양상 비교 분석

        윤선일,이경우,김균무,성애진,장태창 대한응급의학회 2013 대한응급의학회지 Vol.24 No.6

        Purpose: The prevalence of intoxication and toxidromes,such as altered mental status, from Sedatives/hypnotics is high. Many patients have been transferred to a higher-level emergency center. This study was designed to analyze the clinical features of these patients and to compare patients transferred from a regional hospital with patients who directly visited a higher-level emergency center. Methods: A retrospective study was conducted on 298sedative/hypnotic intoxication patients examined from January 2008 to December 2012. After excluding patients intoxicated from other category medications and missing data on medical records, 158 acute intoxication patients were enrolled in the study and divided into transferred and direct-visit groups. Gastric lavage patients (n=108) were also subdivided into two groups by irrigation site. Clinical features, treatments, and complications were investigated. Results: There were no significant differences between the two groups in initial clinical manifestations, laboratory data,and toxicological information, except for charcoal treatment and complications from pneumonia. The use of charcoal was significantly lower in the group transferred from a regional medical center. The transferred group showed a higher incidence of pneumonia than the direct-visit group (10/54(18.5%) vs. 5/104(4.8%), respectively, p=0.007). In the subgroup analysis of gastric lavage patients, there was also a higher incidence of pneumonia in the regional hospital lavage group compared to the higher-level emergency center lavage group (8/32(25.0%) vs. 5/76(6.6%), respectively,p=0.011). From a comparative analysis of pneumonic complications and mental status, pneumonia patients showed a higher incidence of painful responses and unresponsive mentality (6(40.0%) and 4(26.7%), respectively, p<0.001). Conclusion: In acute sedative/hypnotic intoxication patients, transferred patients, including regional hospital gastric lavage patients, showed a higher incidence of pneumonia. Pneumonic complication patients showed a higher incidence of a decreased mentality. Therefore, for patients transferred or treated for an altered mental status, precautions for complications from pneumonia must be considered.

      • 가스침탄에 의한 Helical Gear의 Helix Angle 변형

        윤선일 울산과학대학 1983 연구논문집 Vol.8 No.1

        본 논문에서는 가스침탄을 행함에 따른 유한치폭을 가진 Helical Gear의 Helix Angle 변형에 대하여 고찰하였다. 실험결과 침탄후의 Helix Angle은 침탄전과 비교해서 작아지는 방향으로 변형되었고, 그 변형량은 치폭의 크기에 따라 달라졌다. The purpose of this paper is to study the helix angle deviation of helical gear with finite face width after gas carburizing. As a result of the experiment the helix angle of helical gear after gas carburizing was deviated forwards the direction to decrease the helix angle. And the amount of deviation depended upon the difference of face width.

      • KCI등재

        지방정부 정책은 어떻게 확산되는가?: 인구조례 도입 및 제도화를 중심으로

        윤선일,김정숙 (재) 한국지방행정연구원 2022 地方行政硏究 Vol.36 No.4

        이 연구는 인구조례의 도입 및 제도화 요인을 살펴보는 것을 목적으로 전국의 226개 기초자치단체를 대상으로 패널순위로짓분석을 실시하였다. 분석결과를 살펴보면 조례 도입과 제도화에 주로 영향을 미치는 것은 외부적 결정요인인 수평적 확산과 수직적 확산이었다. 구체적으로 인구조례를 도입하는 데에는 수평적 확산이 유의미한 영향을 미치고, 인구조례 제도화에는 수평적 확산과 수직적 확산 모두 유의미한 영향요인이었다. 또한 외부적 확산과 지자체 유형 간 상호작용항이 통계적으로 유의미함을 알 수 있다. 이는 지자체 유형에 따라 수직적 확산이 인구조례 제도화 수준에 미치는 영향이 다르며, 특히 시 유형이 다른 유형에 비해 수직적 확산이 제도화 수준에 미치는 영향이 더욱 크다는 점을 알 수 있다. 이러한 분석결과는 몇 가지 정책적 시사점을 제공한다. 첫째, 인구감소에 대응하고자 하는 사회・경제적 필요성에 비해 동일 지방자치단체 유형 내에서 인구조례를 얼마나 많이 도입하는지가 조례 도입에서 큰 영향을 미치고 있다. 둘째, 기초자치단체의 인구감소 현황이 천차만별이듯이 인구조례 도입 및 제도화 역시 기초자치단체의 유형에 따라 서로 다르게 대응하고 있다.

      • 旋削에서 鑄鐵의 被削性에 對한 硏究

        尹善一,金正顯 울산과학대학 1992 연구논문집 Vol.17 No.-

        무연탄은 우리나라에서 Cupola 연료로 사용하여 주철생산에 사용되어 왔다. 그러나 무연탄은 코크스와 성질이 달라서 무연탄으로 조업한 주철의 성질은 코크스로 조업한 주철의 성질과는 다르다는 것을 발견해왔다. 따라서 본 연구에서는 무연탄과 콘크스를 연료로한 주철 시편을 각각 제작하여 공구의 마모량, 절삭력 및 표면조도를 실험적으로 조사하여 무연탄으로 조업한 주철의 피삭성을 규명하였다. In the manufacturing of cast iron, anthracite has been used as a fuel for cupola in our country. Since anthracite has different properties from coke, properties of cast iron manufactured by anthracite has been found different from those of cast iron manufactured by cast iron coke for cupola melting. The objective of this study is to find characteristrics by comparing machinability of the cast iron manufactured by anthracite with that of cast iron manufactured by coke for cupola. Tool wear, cutting force and surface roughness of those specimens were investigated experimentally.

      • KCI등재

        협업활성화 요인이 협업효과성에 미치는 영향: 중앙공무원과 지방공무원의 인식 차이 비교를 중심으로

        윤선일,이규민,구주영 재단법인 경기연구원 2022 GRI 연구논총 Vol.24 No.1

        There are bound to be limitations in the occurrence of policy problems reflecting complexity, uncertainty, and various interests, and the independent response of specific administrative agencies to the surge in qualitatively diverse administrative demand. The reason is that problems faced by administrative agencies include various administrative demands and interests, and are widely affected by uncertain environments. Therefore, as part of efforts to solve problems such as spatial constraints and lack of capabilities of public organizations, various public organizations are forming and implementing administrative cooperation. However, administrative cooperation is likely to fail, and various factors are suggested as the cause of success or failure of administrative cooperation. In view of these points, this study viewed the factors for successful implementation of administrative cooperation as activation factors, and analyzed the effect on collaboration effectiveness such as job satisfaction and organizational performance of organizational members. In addition, in consideration of the specificity between collaborators, differences in perceptions arising from central and local government officials were compared and analyzed. As a result of the analysis, it was confirmed that institutional design and introduction for collaboration, strategic management for collaboration, and organizational and cultural collaboration culture were needed. In addition, local government officials were more positively aware of collaboration effects such as job satisfaction and organizational performance. Among the factors to revitalize collaboration, in the case of collaboration management, it was recognized that collaboration management had a positive effect on job satisfaction and organizational performance as central public officials. Therefore, it was confirmed that there is a need to reduce the gap in awareness of collaboration activation and collaboration effectiveness between central and local public officials, and improvement is needed so that collaboration management of central public organizations can have a substantially positive effect on collaboration effectiveness. 복잡성과 불확실성 그리고 다양한 이해관계가 반영된 정책문제의 발생과 질적으로 다양한 행정수요의 급증에 대한 특정한 행정기관의 단독적인 대응은 한계가 존재할 수밖에 없다. 그 이유는 행정기관이 직면한 문제가 다양한 행정수요 및이해관계 등을 포함하고 불확실한 환경의 영향을 받으며 광범위하게 발생하기 때문이다. 따라서, 행정기관의 공간적 제약과 역량의 부족 등의 문제를 해결하기 위한 노력의 일환으로, 다양한 행정기관들이 행정협업을 형성 및 시행하고 있다. 하지만 행정협업은 실패할 가능성이 있으며, 행정협업의 성패 원인으로 다양한 요인 제시되고 있다. 이와 같은 점을감안하여, 본 연구는 행정협업이 성공적으로 시행되기 위한 요인을 행정협업의 활성화 요인으로 보고, 이를 제도적, 관리적 그리고 문화적 요인으로 구성하여 조직구성원의 직무만족과 조직성과와 같은 협업효과성에 미치는 영향을 분석하였다. 또한, 협업주체간 특수성을 고려하여, 중앙 및 지방자치단체 공무원 여부에 따라 발생하는 인식의 차이를 비교 분석하였다, 분석결과, 협업을 위한 제도적 설계와 도입, 협업을 위한 전략적인 관리 그리고 조직문화적 협업문화의 조성이 필요하다는 점을 확인할 수 있었다. 이에 더하여, 지방공무원일수록 직무만족 및 조직성과와 같은 협업효과성을 긍정적으로 인식하고 있었고, 협업활성화 요인 중에서 협업관리의 경우, 중앙공무원일수록 협업관리가 직무만족 및 조직성과에 긍정적인 영향을 미치는 것으로 인식하고 있었다. 따라서, 중앙 및 지방공무원간 협업활성화 및 협업효과성에 대한인식의 격차를 감소시킬 필요가 있으며, 중앙행정기관의 협업관리가 협업효과성에 실질적으로 긍정적인 영향을 미칠 수있도록 개선이 필요하다는 점을 확인할 수 있었다.

      • 밀링가공의 최적절삭조건 선정

        윤선일 울산과학대학 2002 연구논문집 Vol.28 No.2

        절삭가공에서 최적절삭조건의 선정은 가공정밀도와 생산성의 관점에서 매우 중요한 문제이다. 본 논문에서는 최소생산가와 최대생산율을 얻기 위한 두 개의 제한조건에 대해 최적절삭조건을 선정하는 방법을 연구하였다. 표면조도와 허용동력을 만족하는 최적절삭조건을 선정하는 방법과 인서트의 초기위치오차를 고려하여 표면조도를 만족할 수 있는 최적절삭조건을 선정하는 방법을 연구하였다. 공구가격의 변화에 따른 목적함수와 표면조도의 변화에 따른 목적함수를 구하여 최적절삭조건을 선정하는 방법을 연구하였다. Determination of optimum cutting conditions is very important problem viewed in machining precision and productivity. In this paper, optimum cutting conditions under two constraints are determined to obtain minimum production cost and maximum production rate. Methods are determined to obtain optimum cutting conditions satisfying surface roughness and allowable power. Methods are determined to obtain optimum cutting conditions by objective function varying tool cost and surface roughness.

      • SCOPUSKCI등재

        ART2 신경회로망을 이용한 밀링공정의 공구마모 진단

        윤선일,고태조,김희술,Yoon, Sun-Il,Ko, Tae-Jo,Kim, Hee-Sool 한국정밀공학회 1995 한국정밀공학회지 Vol.12 No.12

        This study introduces a tool wear monitoring technology in face milling operation comprised of an unsupervised neural network. The monitoring system employs two types of sensor signal such as cutting force and acceleration in sensory detection state. The RMS value and band frequency energy of the sensor signals are calculated for te input patterns of neural network. ART2 neural network, which is capable of self organizing without supervised learning, is used for clustering of tool wear states. The experimental results show that tool wear can be effectively detected under various cutting conditions without prior knowledge of cutting processes.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼