http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이준연,윤민호,박태석,전인곤,윤귀덕,Lee, Junyoun,Yoon, Minho,Park, Taeseok,Chun, Inkon,Yun, Kwidug 대한치과보철학회 2018 대한치과보철학회지 Vol.56 No.1
Purpose: The purpose of this study is to evaluate the accuracy of surgical stent according to the supported type. Materials and methods: 5 sets of dental models which have tooth supported edentulous area and tooth-tissue supported edentulous area were made. Dental model were scanned with model scanner, and CBCT was taken. CT data and model scan data were overlapped using In2Guide software, implant were virtually planned in the software. Surgical stents are fabricated by 3D printing. The implant fixture were installed using the surgical stent, CBCT were retaken. CBCT before surgery and after surgery were overlapped, and the differences (angle difference, coronal difference, apical difference) were evaluated using statistical analysis. Results: In the assessment of the accuracy of surgical guides according to arch type, there are no statistically significant differences between maxilla and mandible. In the case of support type, tooth supported stents showed lower angle difference and length difference than tooth-tissue supported stents, which are statistically significant. Conclusion: Arch type does not affect the accuracy of surgical stents. But tooth support stents are more accurate than tooth-tissue support stents in the case of angle and length difference. 목적: 본 연구의 목적은 디지털 소프트웨어를 이용하여 제작된 수술용 스텐트를 이용하여 지지 형태에 따른 수술용 스텐트의 정확성을 분석하는 것이다. 재료 및 방법: 총 5세트의 치아모형에 대하여 양측에 지대치가 있는 치아지지형 무치악 모델과 근심에만 지대치가 있는 치아-조직 지지형 무치악 모델을 제작하였다. 모델을 스캐닝을 시행하고, 전산화 단층 촬영을 실시하여 In2Guide 소프트웨어를 이용하여 전산화 단층 촬영술의 정보와 모델 스캐닝 정보를 중첩하여 임플란트 고정체(USII, $4{\times}10mm$, Osstem, Seoul, Korea)에 대한 가상적인 위치배열을 실시하고 수술용 스텐트 제작하였다. DMAX 수술 키트을 사용하여 임플란트 고정체를 식립하였다. 식립후 전산화 단층 촬영을 실시하여 찍어 술전에 계획된 임플란트와 실제 식립된 임플란트 사이에 오차(angle difference, coronal difference, apical difference)를 측정하여 통계분석을 시행하였다. 결과: 악궁에 따른 정확도 결과에서 하악이 전반적으로 각도, 길이오차의 값이 작게 나타났으나 이는 통계적 유의성이 없었다. 스텐트의 지지 형태에 따른 정확도 결과에서 치아지지형 스텐트가 치아-조직지지형 스텐트보다 길이오차와 각도오차의 값이 통계적으로 유의하게 작은 값을 보였다. 결론: 악궁(상악, 하악)은 수술용 스텐트의 정확도에 영향을 미치지 않았으며, 치아 지지형 스텐트는 치아-조직지지형 스텐트보다 더 적은 오차를 보여 주었다.
심한 치조제 흡수를 보이는 무치악 환자에서 Jiro Abe법에 의한 완전틀니 제작 증례
전대전,양동헌,방몽숙,양홍서,박상원,윤귀덕,Jun, Daejeon,Yang, Dong-Hun,Vang, Mongsook,Yang, Hongso,Park, Sangwon,Yun, Kwidug 대한치과보철학회 2014 대한치과보철학회지 Vol.52 No.4
Jiro Abe법에 의한 완전틀니 제작 방법은 의치 상연부의 전체 주위를 가동 점막으로 봉쇄하는 것에 의해 연하 또는 교합 시 의치상 내면에서 일시적인 음압을 형성하여 의치의 유지와 안정을 강화할 수 있는 방법으로 소개되고 있다. 본 증례에서는 특히 하악 치조제가 심하게 흡수된 상하악 완전 무치악 환자에게 Jiro Abe법에 의한 인상채득과 의치 제작을 함으로써 임상적으로 의치의 안정성을 향상시키고, 환자의 만족도를 높였기에 이를 보고하는 바이다. Fabrication of complete denture by Jiro Abe's method was introduced that enhance the retention and stability of denture by sealing around the denture border with mucous membrane to make negative pressure at the inner surface of denture base when swallowing or occlusion. In this case, taking impression and fabricating complete denture by the Jiro Abe's method for an edentulous patient with severe mandibular alveolar bone resorption allowed us to obtain clinically enhance stability of denture and improve satisfaction of patient.
과도한 치조제 흡수를 보이는 무치악 환자에서 Centric tray와 폐구법 인상을 이용한 총의치 수복 증례
정수아,마보영,양홍서,박상원,임현필,윤귀덕,Jung, Sua,Ma, Boyoung,Yang, Hongso,Park, Sangwon,Lim, Hyun-Pil,Yun, Kwidug 대한치과보철학회 2018 대한치과보철학회지 Vol.56 No.2
기존의 의치 인상채득 방법은 치조제 흡수가 심한 환자에게 사용하기에 한계점이 있으며, 의치상을 과도하게 연장하여 문제를 발생시킬 수 있다. 특히나 가동성조직이 존재하는 경우에는 정확한 인상 채득을 하기가 어렵고, 따라서 총의치의 적절한 안착을 방해할 수 있다. 치조제 흡수가 심한 환자에서 폐구법 인상을 이용하여 총의치를 제작하면 더 나은 안정성과 유지를 얻을 수 있다. 본 증례는 86세의 여자환자로 상악 전치부에 치은열성비대가 존재하며 하악의 심한 치조제 흡수를 보이는 무치악 환자이다. 따라서 Centric tray를 이용하여 잠정적인 교합고경을 결정 후 고딕아치 장치를 부착한 맞춤형 트레이를 제작하였고, 폐구법 인상채득을 시행하여 상하악 총의치를 제작하였으며, 의치의 충분한 안정성과 유지력을 얻어 환자의 만족도를 높였다. Conventional denture impression techniques have limitations for edentulous patients with severe alveolar bone resorption and can cause problems from excessive border extension. Especially when a patient has movable tissue it is difficult to make accurate impression, thus might interrupt stable seating of complete denture. Fabrication of complete denture using closed mouth technique for edentulous patient with severe ridge resorption is thought to provide better stability and retention. In this case, an 86-year-old patient had both edentulous jaws with epulis fissuratum on maxillary anterior ridge and severe mandibular ridge resorption. Thus, tentative vertical dimension was determined by using Centric trayand individual tray attached with gothic arch tracer was fabricated. Complete denture was fabricated using closed mouth technique and the patient was satisfied with better stability and retention of the complete denture.
전대전,방몽숙,양홍서,박상원,임현필,윤귀덕,Jun, Daejeon,Vang, Mongsook,Yang, Hongso,Park, Sangwon,Lim, Hyunpil,Yun, Kwidug 대한치과보철학회 2015 대한치과보철학회지 Vol.53 No.4
중심위를 채득하는 방법 중 Gothic arch tracer를 활용한 고딕아치 묘기법(gothic arch tracing method)은 하악의 곡선운동 경로를 묘사해 줌으로써 악골 운동을 좀 더 정확히 재현할 수 있게 한다. 본 증례에서는 비기능적인 운동으로 인해 술자에 의한 중심위로의 유도가 어려운 환자에서 고딕아치 묘기법을 통해 재현성이 있는 중심위를 채득하여 만족할만한 결과를 얻을 수 있었기에 이를 보고하는 바이다. The Gothic arch tracing method using a Gothic arch tracer which is one of the centric relation recording methods can reproduce mandibular movement more accurately by describing the path of mandibular curvilinear motion. This case reports that we have satisfactory results by recording reproducible centric relation using a gothic arch tracing method in a patient who has difficulty to induce centric relation by operator due to parafunctional movement.