http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
중저온 열원에 의한 메탄 수증기 개질의 형상 인자에 따른 특성
신가희(Gahui Shin),윤진원(Jinwon Yun),유상석(Sangseok Yu) 대한기계학회 2016 大韓機械學會論文集B Vol.40 No.12
폐열을 열원으로 사용하는 저온형 개질기는 하이브리드 연료전지 시스템의 효율향상을 위해 사용되고 있다. 저온형 개질기의 경우 저온의 열적상태에서 높은 열전달 효율을 내는 것이 중요하며, 이를 위한 형상 최적화의 과정이 필요하다. 본 연구에서는 제한된 열공급 상황에서 개질기의 형상인자 변화에 따른 온도 및 반응특성을 전산해석을 통하여 알아보고자 하였다. 해석결과 저온형 개질기의 반응이 활발히 일어나는 영역은 온도가 높은 후단에 제한되는 현상을 보여 고온형 개질기와의 차이를 나타내었다. 또한 개질기의 기체공간속도(Gas hourly space velocity, GHSV)를 감소시키거나 열전달 면적을 증대시킴으로써 효율을 향상 시킬 수 있음을 확인하였고 종횡비에 따른 해석을 실시한 결과 저온형 개질기의 경우 길이방향보다는 반경방향의 열전달을 증대시키는 방법이 효과적임을 확인하였다. In a hybrid fuel cell system, low-temperature reforming technology, which uses waste heat as a heat source, is applied to improve system efficiency. A low temperature reformer is required to optimize geometry in low thermal conditions so that the reformer can achieve the proper methane conversion rate. This study analyzed internal temperature distributions and the reaction patterns of a reformer by considering the change of the shape factor on the limited heat supply condition. Unlike the case of a high temperature reformer, analysis showed that the reaction of a low temperature reformer takes place primarily in the high temperature region of the reactor exit. In addition, it was confirmed that the efficiency can be improved by reducing the GHSV (gas hourly space velocity) or increasing the heat transfer area in the radial direction. Through reacting characteristic analysis, according to change of the aspect ratio, it was confirmed that a low temperature reformer can improve the efficiency by increasing the heat transfer in the radial direction, rather than in the longitudinal direction.
송동근(Dong-keun Song),신가희(Gahui Shin),윤진원(Jinwon Yun),유상석(Sangseok Yu) 대한기계학회 2016 大韓機械學會論文集B Vol.40 No.12
분리막을 이용한 탄화수소계 가스의 종 분리는 화학적 방법에 비해 공정 구성이 용이하고, 유지보수가 쉬우며 또 경제성이 우수하다. 분리막 기술의 발전과 함께 다양한 응용이 가능하지만, 이를 위한 체계적인 공정 연구를 위한 해석 방법은 다양하지 않다. 본 연구에서는 상용 프로그램에서 제공하는 유저 루틴을 이용해 분리막의 공정 해석을 하기 위한 분리막 물질 전달 모델을 개발하였다. 모델 개발에서는 집중용량법, 다중 셀 기법, 그리고 차분형 모델링 기법을 비교하여 각각의 특징을 분석하였으며, 확장성과 정밀도가 우수한 차분형 모델링 기법을 최종 모델로 선정하였다. 선정모델을 이용해 분리막의 가스 투과율에 영향을 주는 인자인 투과율, 투과면적, 양단 압력차, 투과 유량 등에 대한 기초 해석을 수행하였다. 이를 통해 압력비가 높아지게 되면 투과율은 점진적으로 향상되지만, 실제 선택도는 압력비 상승에 대해 최적점이 존재함을 알 수 있으며, 투과율도 최적점이 존재하였다. Membranes are used to separate pure gas from gas mixtures. In this study, three different types of mass transport through a membrane were developed in order to investigate the gas separation capabilities of a membrane. The three different models typically used are a lumped model, a multi-cell model, and a discretization model. Despite the multi-cell model producing similar results to a discretization model, the discretization model was selected for this investigation, due to the cell number dependence of a multi-cell model. The mass transport model was then used to investigate the effects of pressure difference, flow rate, total exposed area, and permeability. The results showed that the pressure difference increased with the stage cut, but the selectivity was a trade-off for the increasing pressure difference. Additionally, even though permeability is an important parameter, the selectivity and stage cut of the membrane converged as permeability increased.