http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Robust On-line Rotor Time Constant Estimation for Induction Machines
유안노 전력전자학회 2014 JOURNAL OF POWER ELECTRONICS Vol.14 No.5
This paper proposes an on-line rotor time constant estimation strategy for indirect field oriented induction machines. Theperformance of the indirect field oriented control is dependent especially on the rotor time constant whose value varies according tothe temperature. The proposed method calculates the difference between the nominal rotor time constant and the real value from thed- and q-axis integration terms of a proportional integral (PI) current regulator and the demanded voltages of the induction machineto regulate the current in the steady state. Because the proposed strategy has a simple structure and is available in wide speed andtorque ranges, the proposed method can be easily used in the industrial field. The effectiveness of proposed strategy is verified withsimulations and a 7.5kW experimental setup.
유안노,한상헌,손영익,윤영두,홍찬욱 전력전자학회 2016 JOURNAL OF POWER ELECTRONICS Vol.16 No.4
This paper proposes a design guideline for the feedback gain of the adaptive full-order observer in the speed sensorless control of induction machines. The performance of the adaptive full-order observer is dependent on its feedback gain. This paper presents a pole placement method for the observer feedback gain design to improve the estimation performance of the speed adaptive observer. In the proposed method, the observer poles can be chosen independently of the induction motor poles. Instead, they can be positioned according to the operating speed. An analysis and experimental results obtained with the proposed method reveals better performances under general operating conditions.
직렬 연결 고주파 변압기를 가지는 교류/직류 전력변환 회로
유안노(Anno Yoo),김명호(Myoungho Kim),설승기(Seung-Ki Sul) 전력전자학회 2010 전력전자학술대회 논문집 Vol.2010 No.7
본 논문에서는 계통 연계가 가능한 새로운 교류/직류 전력변환 장치를 제안한다. 제안된 전력변환 회로는 정현파의 입력상 전류를 가지고, 양방향 전력 전달이 가능하며, 역률 제어가 가능하다는 장점으로 인하여 계통 연계형 전력변환 장치로 적합하다. 특히 제안된 전력변환 장치는 무효전력 소자의 사용을 최소화하여 시스템의 신뢰성을 증대시키고, 전기적 절연을 고주파 변압기를 통하여 얻도록 하여 시스템의 부피를 줄일 수 있다는 장점을 갖는다. 본 논문에서는 제안된 전력변환 회로의 구성 방법과 각 부분 별 동작에 대해서 기술하였으며 실험 장치를 구성하여 그 타당성을 입증하였다.
전압 사용율 증대를 통한 매입형 영구자석 동기 전동기의 고속 운전 성능 향상에 대한 연구
유안노(Anno Yoo),김혜승(Hyeseung Kim),홍찬욱(Chanook Hong),김경서(Kyung-Seo Kim) 전력전자학회 2011 전력전자학술대회 논문집 Vol.2011 No.7
본 논문에서는 전압 사용율 증대를 통한 매입형 영구자석 동기 전동기의 약자속 운전 성능 향상 방법을 제시한다. 팬, 펌프 등과 같이 고속 운전이 빈번한 분야에 사용되는 매입형 영구자석 동기 전동기는 운전 속도에 따라, 적절한 약자속 운전 방법이 필요하다. 본 논문에서는 전류 지령 수정을 하는 매입형 영구자석 동기전동기의 약자속 운전 방법을 제시하고, 실험을 통하여 그 타당성을 입증하였다.
A Simple Method for Identifying Mechanical Parameters Based on Integral Calculation
한상헌,유안노,윤상원,윤영두 전력전자학회 2016 JOURNAL OF POWER ELECTRONICS Vol.16 No.4
A method for the identification of mechanical parameters based on integral calculation is presented. Both the moment of inertia and the friction constant are identified by the method developed here, which is based on well-known mechanical differential equations. The mechanical system under test is excited according to a pre-determined low-frequency sinusoidal motion, minimizing the distortion, and increasing the accuracy of the results. The parameters are identified using integral calculation, increasing the robustness of the results against measurement noise. Experimental data are supported by simulation, confirming the effectiveness of the proposed technique. The performance improvements shown here are of use in the design of speed and position controllers and observers. Owing to its simplicity, this method can be readily applied to commercial inverter products.