http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김남희(Namhui Kim),위정현(Junghyun Wee),윤호성(hoseong Yoon),방지훈(Jihun Bang),성선모(Seonmo Seung) 한국추진공학회 2018 한국추진공학회 학술대회논문집 Vol.2018 No.12
항공용 제트 펌프는 구동 유체를 공급하는 승압펌프와 엔진의 운용 조건에 따른 요구사항을 만족하도록 설계되어야 한다.[1] 유동 해석을 통해 제트 펌프가 성능을 만족하는지 확인하고 성능시험을 통해 제트 펌프가 요구 사항을 만족하는지 알아보고자 하였다. 제트펌프가 실제 장착되는 형상을 모사한 유량시험장비를 제작하여 공급되는 압력에 따라 제트펌프가 가지는 성능결과를 나타내고자 한다. Aircraft Jet Pump have to be designed satisfying with requirement by boost pump supplying motive fuel and operating condition of Engine. In this study, we checked the performance of Jet pump by Fluid Analysis and Fluid Test.
김남희(Namhui Kim),위정현(Junghyun Wee),윤호성(hoseong Yoon),방지훈(Jihun Bang),성선모(Seonmo Seung) 한국추진공학회 2019 한국추진공학회 학술대회논문집 Vol.2019 No.11
항공용 제트 펌프는 구동 유체를 공급하는 승압펌프와 엔진의 운용 조건에 따른 요구사항을 만족하도록 설계되어야 한다.[1] ANSYS WORKBENCH[2]를 이용한 성능 해석 및 실제 장착되는 형상을 모사한 성능시험을 통해 제트 펌프가 요구사항을 만족하는지 확인 하였고, 이를 기반으로 민수(RTCA/DO-160G) 및 군수(MIL-STD-810G) 환경시험을 통해 항공용 제트 펌프의 신뢰성 평가를 하고자 하였다. Aircraft Jet Pump have to be designed satisfying with requirement by boost pump supplying motive fuel and operating condition of Engine. Through the Fluid Analysis and Fluid Test, We confirmed performance requirements. In this study, we checked the Reliability assessment of Jet pump as Environmental test applying RTCA/DO-160G method and MIL-STD-810G.
김연호(Younho Kim),선종호(Jongho Seon),강성민(Seongmin Kang),위정현(Junghyun Wee),윤호성(Hosung Yoon),최원호(Wonho Choe),이종섭(Jongsub Lee),서미희(Mihui Seo) 한국항공우주학회 2009 韓國航空宇宙學會誌 Vol.37 No.4
소형 인공위성의 궤도 보정을 위한 300 W급 홀 추력기의 제논연료공급장치를 개발하였다. 가스 상태의 제논 연료를 150 bar에서 2 ㎏을 저장할 수 있으며, 0.5 SCCM의 미세 유량을 제어할 수 있다. 미세 유량을 제어할 수 있는 유량 제어밸브의 구동을 위해 시스템을 구성하고, 시험을 통해 성능검증을 수행하였다. 이를 통해 1.0×10?? torr압력의 진공에서 연료공급장치가 성공적으로 동작함을 확인하였다. A Xenon feed system has been developed for a 300 W Hall-effect thruster intended for orbit maintenance of small satellite. The system can store about 2 ㎏ of xenon gas at 150 bar and is capable of controlling the mass flow rate of the gas at 0.5 SCCM resolution. The performance of the system is verified with a laboratory experiment. It is confirmed that the operation of the feed system is successful at a pressure level of 1.0×10?? torr in the vacuum chamber.
손미소(MiSo Son),고수정(Sujeong Ko),최윤호(Younho Choi),김남희(Namhui Kim),위정현(JungHyun Wee),윤호성(Hosung Yoon),김연호(Younho Kim) 한국추진공학회 2019 한국추진공학회 학술대회논문집 Vol.2019 No.11
제논연료공급장치는 유량제어를 통한 전기 추력기에 제논연료를 공급하는 장치이다. 제논연료공급장치는 메인 탱크(Main Tank), 메인 필터(Main Filter), 충진배출밸브(Fill and Vent Valve), 오리피스 픽스쳐(Orifice Fixture), 차단밸브(Isolation Valve), 저장용기(Accumulator Tank)로 구성되어 있다. 주요 구성품은 메인필터, 충진배출밸브, 차단밸브, 저장용기이며 설계, 해석, 제작, 시험 순으로 제작수행 하였다. 구성품 제작시 가공, 조립 및 용접이 진행되었으며 시험은 각 단품에 대해 진행하였다. Xenon Feeding Unit(XFU) supply xenon fuel to the electric thruster through flow rate control. XFU compose Main Tank, Main Filter, Fill and Vent Valve(FVV), Orifice Fixture, Isolation Valve and Accumulator Tank(ACT). Main components are Main Filter, FVV, Isolation Valve and ACT. It is sequence of design, analysis, product and test. It was conducted processing, assembly and welding in component fabrication. And tests were conducted for each unit.
우주추진용 홀방식의 전기추력기를 위한 제논연료공급장치 개발
김연호(Younho Kim),강성민(Seongmin Kang),정연황(Yunhwang Jung),선종호(Jongho Seon),위정현(Junghyun Wee),윤호성(Hosung Yoon),최원호(Wonho Choe),이종섭(Jongsub Lee),서미희(Mihui Seo) 한국항공우주학회 2011 韓國航空宇宙學會誌 Vol.39 No.1
소형인공위성의 우주추진체로 사용될 홀방식 전기추력기의 서브시스템으로 제논연료공급장치가 개발되었다. 제논연료공급장치는 연료저장탱크에서 추력기의 양극과 음극에 낮은 압력으로 연료를 공급하게 된다. 추력기는 양극과 음극에서 독립적으로 정밀한 연료의 유량제어를 요구하고 있다. 연료의 유량은 양극과 음극에 각각 위치한 오리피스와 차단밸브를 통해 축압탱크의 압력을 변경함으로서 조절된다. 본 논문은 제논연료공급장치의 부품선정을 포함한 설계와 성능검증 및 기능시험에 대한 내용을 다루고 있다. A Xenon Feed System (XFS) has been developed for hall-effect thruster to small satellite space-propulsion system applications. The XFS delivers low pressure gas to the Anode and Cathode of thruster head unit from a xenon storage tank. Accurate throttling of the propellant mass flow rate is independently required for each channel of the thruster head unit. The mass flow rate to each channel is controlled using the accumulator tank pressure regulation through a micron orifice and isolation valve. This paper discusses the Xenon Feed System design including the component selections, performance estimation and functional test.