http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초임계유체 조건에서 제조된 그래핀의 구조분석과 그래핀/에폭시 수지조성물의 열전도 특성
오원태 ( Weontae Oh ),최규연 ( Gyuyeon Choi ) 한국복합재료학회 2021 Composites research Vol.34 No.5
초임계유체 조건은 별도의 환원제와 높은 열처리 공정조건 없이 산화그래핀으로부터 그래핀을 제조할 수 있다. 본 연구에서는 메탄올과 에탄올 용매의 초임계유체 조건에서 산화그래핀을 그래핀으로 변환시키는 공정을 연구하였다. 제조된 그래핀의 구조를 FE-SEM과 XRD를 사용하여 분석하였을 때, 초임계 조건에서 산화그래핀의 환원반응은 다른 변수(농도, 반응시간)보다는 용매의 변화에 더 크게 영향을 받았다. 에탄올 용매의 사용이 메탄올을 사용했을 때보다 환원반응에 더욱 좋은 결과를 보여주었다. 본 연구에서 준비된 그래핀을 20 wt%까지 에폭시수지와 혼합하여 복합수지 조성물을 제조하여, 이 조성물의 열전도특성을 분석하였다. 복합수지조성물의 열전도도는 그래핀의 함량에 비례하여 상승하였고, 에탄올 초임계 용액조건에서 제조된 그래핀이 복합수지조성물의 열전도도에 더 효과적이었다. Graphene oxide can be reduced to graphene under supercritical fluid condition even without using a specific reducing agent or applying a high thermal process. In this study, a process for converting graphene oxide into graphene was studied under supercritical fluid conditions in methanol and ethanol solvents. When the structure of asprepared graphene was analyzed by using FE-SEM and XRD, the reduction of graphene oxide in supercritical fluid condition was more affected by the change of solvent than other variables such as concentration of graphene oxide and reaction time. The use of ethanol showed better results for the reduction than the use of methanol. The graphene prepared in this study was mixed with epoxy resin up to 20 wt.% to make composites, and the thermal conductivity of the composites were analyzed. Thermal conductivity of the composite increased proportionally with graphene loadings. The graphene prepared in supercritical ethanol condition was more effective on the thermal conductivity of the composite.
최규연,오원태,Choi, Gyuyeon,Oh, Weontae 한국전기전자재료학회 2020 전기전자재료학회논문지 Vol.33 No.6
Heating films were prepared with composites of poly (methyl methacrylate) and conductive graphite. The as-prepared composite was deposited on a PET film and then fabricated using a bar coater to produce a film with uniform thickness. Copper electrodes were attached to both ends of the as-prepared film, and the heating characteristics of the film were analyzed while applying a DC voltage. The electrical conductivity and heating temperature of the heating films depended on the size, structure, content, and the dispersion characteristics of the graphite in the composite. The thermal energy was adjusted by controlling the electrical energy, based on the Joule heating theory. The electrical resistance of the film was altered in proportion to Ohm's law, and the heating temperature was changed according to the structure of the film (interelectrode spacing or electrode length) and the conductive graphite content. When the content of conductive graphite in the film increases, the electrical resistance decreases, and the heating temperature increases; however, there is no significant change above a certain content (50%).
김정수,이건웅,오원태,Kim, Jung-Soo,Lee, Geon-Woong,Oh, Weon-Tae 한국전기전자재료학회 2007 전기전자재료학회논문지 Vol.20 No.10
Carboxylated multi-walled carbon nanotubes (MWNTs) were in detail characterized by XRD, XPS, FTIR, and thermogravimetric measurements. Carboxylic acid groups were functionalized to MWNTs under aqueous acid condition. The changes of sonication and reflux conditions rarely influenced the degree of carboxylation on MWNTs, but decreased the thermal stability of the resultant carboxylated MWNTs. XRD results showed that the diffraction peaks (100), (101), and (102) of pristine MWNTs disappeared after acid treatment, but the diffraction peak (002) was Preserved in the carboxylated MWNTs. The introduction of carboxylic acid groups on MWNTs caused to improve the dispersibility of the resultant carboxylated MWNTs in water.
성장온도의 변화에 따른 MFI Zeolite Membrane의 성장 특성 분석
김덕은,고창현,오원태,Kim, Duk-Eun,Ko, Chang-Hyun,Oh, Weon-Tae 한국전기전자재료학회 2009 전기전자재료학회논문지 Vol.22 No.4
Si wafer, which was treated with TMSP-TBA (N-trimethoxysilylpropyl-n,n,n-tri-n-butylammonium bromide), was used foF a substrate to grow a MFI membrane. Growth of membranes was conducted in various conditions such as temperature and gravity, and their structures were in detail studied with field emission scanning electron microscope and x-ray diffractometer. The structures of membranes grown on substrates were strongly dependent on growing temperature and gravity.
전도성 고분자/CdTe 나노입자/탄소 나노튜브 복합박막의 특성 연구
김도훈,심성은,김정수,남대근,오원태,Kim, Do-Hoon,Shim, Seong Eun,Kim, Jungsoo,Nam, Dae-Geun,Oh, Weontea 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.4
The composites composed of conducting polymer (MEH-PPV), CdTe nanoparticles, and multiwalled carbon nanotubes (MWNTs) were spectroscopically and electrically characterized in their thin films. The composite films were prepared by spray coating. These composites were prepared from the mixture solution of MEH-PPV and CdTe-embedded MWNTs, in which CdTe nanoparticles were electrostatically bound to MWNTs. UV/vis and PL spectra were analyzed to investigate the optical absorbance and emission of the composite films. In addition, their structural, electrochemical, and electrical properties were studied by transmission electron microscopy, cyclic voltammetry, and I-V measurement.
송승원,민의홍,이동원,김정수,오원태,Song, Seung Won,Min, Eui Hong,Lee, Dong Won,Kim, Jungsoo,Oh, Weontae 한국재료학회 2017 한국재료학회지 Vol.27 No.2
Natural and expandable graphites were chemically treated in acidic aqueous solutions such as acetic acid or mixtures of acetic acid and nitric acid. Structures and thermal conductivities of the as-treated graphites were characterized in detail. Both graphites were significantly oxidized in the mixed acidic solution of $H_2SO_4$ and $HNO_3$, which condition was generally used for the oxidation of carbon nanotubes. This considerable oxidation of graphites caused a depression of their thermal conductivity. The structural characteristics, obtained by XRD and XPS, show that the graphites treated in the relatively weak acidic conditions (acetic acid or mixture of acetic acid and nitric acid) were quite similar to the untreated graphites. However, the thermal conductivities of both acidic-treated graphites were remarkably increased.
그라핀을 포함하는 폴리이미드 멤브레인의 미세조직구조 변화
심성은,김정수,남대근,오원태,Shim, Seong Eun,Kim, Jungsoo,Nam, Dae-Geun,Oh, Weontea 한국전기전자재료학회 2014 전기전자재료학회논문지 Vol.27 No.1
The polyimide composite membranes were prepared with polyimide composite solutions including graphenes by using the phase inversion method. The morphologies of these membranes were significantly changed according to the graphene loadings in composite solutions and the solvent systems of the composite solutions. The finger-like macro-voids were formed in the hollow fiber membranes which were prepared in the NMP solvent system with a small amount of ethanol. As increasing the content of the viscous alcohols such as glycerol or 1,3-propanediol in the composite solution, however, the morphologies of the hollow fiber membranes were changed to sponge-like types. In case of flat membranes, the increase of graphene content in polyimide composites causes that their membranes change from the finger-like macro-porous to sponge-like morphologies.