http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
여수철,홍수운,최효기,윤창배 한국전자통신학회 2018 한국전자통신학회 논문지 Vol.13 No.6
The C-band omni-directional antenna for drone control is mounted on the top or bottom and used to configure the communication link. The communication link is affected by the LOS depending on the mounting position of the omni-directional antenna. In this paper, two kinds of embedded antennas were designed with a commercial simulation tool CST MWS, and EM analysis was performed considering the mounting environment. Also, we propose the PTMP ground antenna for control a large number of drones. Ground antenna has a communication link of 30km, and it consists of four sector antennas in the horizontal direction and on directional antenna at the top. 드론 제어를 위한 C대역 무지향성 안테나는 드론의 상부 또는 하부에 장착되어 통신링크를 구성하기 위해 사용된다. 통신링크는 무지향성 안테나 장착위치에 따라 LOS의 영향을 받게 된다. 본 논문에서는 드론 탑재를 위한 내장형 안테나 2종을 사용 시뮬레이션 툴인 CST MWS로 설계하고, 장착환경을 고려한 EM 해석을 수행하였다. 또한, 다수의 드론을 제어하기 위한 PTMP 지상안테나를 제안하였다. 지상안테나는 30km의 통신반경을 갖기 위해 수평방향으로 4개의 섹터안테나와 상부에 1개의 지향성안테나로 구성하였다.
JTDLS 완성형 체계를 위한 항공기 내장형 안테나 설계
여수철(Su-Cheol Yeo),강병욱(Byoung-Wook Kang),최효기(Hyo-Gi Choi) 한국전자통신학회 2020 한국전자통신학회 논문지 Vol.15 No.3
본 논문에서는 JTDLS 완성형 항공기에 장착하기 위한 내장형 안테나 설계 방법에 대해 연구하였다. 제안된 안테나는 MIDS-LVT 운용 대역을 충족하고, 확장성을 고려하여 광대역으로 설계하였다. 설계결과, 제안된 안테나는 기존 블레이드 안테나와 전기적 성능은 유사하고, 광대역 특성임을 확인하였다. 항공기 장착성을 확인하기 위해 항공기 상/하부에 안테나를 장착하여 EM 분석한 결과, 상/하부 모두 양호한 복사특성을 나타내는 것을 확인하였다. 본 연구를 통해 획득한 기술은 JTDLS 완성형 항공기에 활용 가능할 것으로 판단된다. In this paper, we studied the method of designing a embedded antenna for mounting on the JTDLS complete aircraft. The proposed antenna satisfies the MIDS-LVT operation frequency band and is designed as a broadband in consideration of expandability. As a result of the design, it was confirmed that the proposed antenna has similar electrical performance to the existing blade antenna and has broadband characteristics. As a result of EM analysis, the antenna was mounted on the top and bottom parts of the aircraft to check the mount of the aircraft, and it was confirmed that both the top and bottom parts had good radiation characteristics. The technology acquired through this study is judged to be applicable to the JTDLS completed aircraft.
여수철(Su-Cheol Yeo),강병욱(Byoung-Wook Kang),배기형(Ki-Hyeong Bae),윤창배(Chang-Bae Yoon) 한국전자통신학회 2020 한국전자통신학회 논문지 Vol.15 No.1
In this paper, we studied on-board antenna(primary link/secondary link/satellite link) used in UAV Data-link system. As a result, it is ideal to configure the Data-link as a triple link to secure the flight stability of the UAV, but the communication link should be configured according to the operating platform. As a result of overseas R&D trend analysis, the on-board Data-link antenna is installed and operated in a location where it is easy to secure LOS. The primary link consists of a directional antenna for basic operation and an omni-directional antenna for emergency operation. The secondary link uses a monopole/dipole antenna in the UHF/C band. Satellite link has been developed to apply phased array antenna to improve UAV operability. 본 논문에서는 UAV 데이터링크 시스템에 사용되는 탑재 안테나(1차링크/2차링크/위성링크)에 대해 연구하였다. 연구결과, UAV의 비행 안정성을 확보하기 위해 데이터링크는 3중링크로 구성하는 것이 이상적이나 운용 플랫폼에 맞게 통신링크를 구성해야 한다. 해외 연구개발 동향 분석결과, 탑재 데이터링크 안테나는 LOS 확보가 용이한 위치에 장착되어 운용되고 있다. 1차링크는 기본운용을 위한 지향성 안테나, 비상운용을 위한 무지향성 안테나로 구성하며, 2차링크는 UHF/C 대역에서 모노폴/다이폴 구조의 안테나를 사용한다. 위성링크는 UAV의 운용성 향상을 위해 위상배열안테나를 적용하는 추세로 발전하고 있다.
여수철(Su-Cheol Yeo),주무용(Woo-Yong Ju),이경문(Gyeong-Mun Lee),정봉식(Bong-Sik Jeong) 한국정보기술학회 2010 한국정보기술학회논문지 Vol.8 No.1
In this paper, triple-band antenna with the center frequencies of 447㎒, 900㎒ and 2.4㎓ for vehicle was designed. PIFA(Planar Inverted-F Antenna) concept was applied to get an impedance matching and miniaturization easily. Spiral line was bifurcated to generate multi-band characteristic. The antenna was designed with signal processing part on PCB. The size of antenna is about 30㎜×20㎜ and under 10% of PCB area. Measured results of designed antenna were matched with given specificaions well.
여수철(Su-Cheol Yeo),주우용(Woo-Yong Joo),정봉식(Bong-Sik Jeong) 제어로봇시스템학회 2009 제어로봇시스템학회 합동학술대회 논문집 Vol.2009 No.12
본 논문은 RKE에 사용되는 311MHz/447MHz 이중대역 안테나와 447MHz/900MHz 이중대역 안테나의 설계에 대해서 다루고 있다. 안테나의 급전부는 공진주파수의 조정과 임피던스의 정합이 쉬운 PIFA(Planar Inverted-F Antenna) 개념을 적용하고, 이중공진 특성은 스파이럴 선로의 중간에 인덕터를 삽입하거나, 스파이럴 선로를 분리시켜 구현하였다. 안테나는 30mm×20mm 이내의 크기를 갖도록 설계하였다.
여수철(Su-Cheol Yeo),주우용(Woo-Yong Joo),정봉식(Bong-Sik Jeong) 한국통신학회 2009 한국통신학회 학술대회논문집 Vol.2009 No.6
본 논문에서는 중심주파수가 311MHz/ 44MHz인 이중대역과 차세대 RKE 시스템용으로 사용되는 900MHz/ 2.4GHz의 이중대역을 갖는 소형 패치 안테나를 PCB 상에 설계하였다. 안테나는 프루브 급전하였으며, 급전부에는 중심주파수 조정과 임피던스 정합이 용이하도록 PIFA(Planar Inverted-F Antenna) 구조를 적용하였다. 안테나는 PCB상에 인쇄되며, 30mm×20mm 이내의 크기로 설계하였다. RKE 리더기 케이스의 영향을 고려하여 설계하였으며, 스파이럴 선로 상에 인덕터를 삽입하여 이중 공진을 얻도록 하였다.
여수철(Su-Cheol Yeo),주우용(Woo-Yong Joo),정봉식(Bong-Sik Jeong) 한국정보기술학회 2009 Proceedings of KIIT Conference Vol.2009 No.-
본 논문에서는 900㎒/ 2.4㎓ 대역에서 이중대역 특성을 갖는 소형 패치 안테나를 FR4_epoxy 기판 상에 설계하였다. 안테나는 프루브 급전하였으며, 급전부에는 주파수 조정과 임피던스 정합이 용이하도록 PIFA(Planar Inverted-F Antenna) 개념을 적용하였고, 설계된 안테나는 30㎜×20㎜ 이내의 크기로 설계하였다. 스파이럴 구조와 미앤더 구조를 혼합한 스파이럴 선로 두 개를 사용하여 이중 공진 특성을 구현하였다. In this paper, dual band small patch antenna on FR4_epoxy plate, with the center frequencies of 900㎒ and 2.4㎓, was designed. PIFA concept was applied to tune impedance matching and frequencies easily. The size of antenna designed on FR4_epoxy plate is within 30㎜×20㎜. Two spiral and meander lines are used to generate dual bands.
여수철(Su-Cheol Yeo),김민성(Min-Sung Kim),박찬익(Chan-Yik Park) 한국정보기술학회 2013 한국정보기술학회논문지 Vol.11 No.11
In this paper, a broadband CLAS was designed for aircraft operating in the UHF-band. In order to satisfy the electrical and the structural performance of CLAS, the proposed CLAS is composed of conductive mesh, face sheet, radiator, honeycomb, housing, feeding. Especially, the radiator is composed of antenna PCB and composite magneto dielectric materials, a wave spiral pattern and composite magneto dielectric materials design techniques were applied. A wave spiral pattern with periodic structural shape increases the electrical length, it has broadband and compact properties. Composite magneto dielectric materials design techniques improve the broadband, compact and impedance characteristics by adjusting permittivity and permeability. The optimized antenna was designed using commercial simulation tool, CST_MWS, and the optimal design was validated by simulation and measurement. Antenna performance measured results showed that gain is more than -4 dBi and VSWR is less than 3.5:1 in the UHF-band.