http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 양승기 ( Seung Gi Yang ) (검색결과 6 건)
- 무료
- 기관 내 무료
- 유료
-
Ni-Mn 전착층의 기계적 성질에 미치는 공정조건의 영향
신지웅 ( Ji Wung Shin ),양승기 ( Seung Gi Yang ),황운석 ( Woon Suk Hwang ) 한국부식방식학회(구 한국부식학회) 2014 Corrosion Science and Technology Vol.13 No.3
Nickel electrodeposition from sulfamate bath has several benefits such as low internal stress, high current density and good ductility. In nickel deposited layers, sulfur induces high temperature embrittlement, as Ni-S compound has a low melting temperature. To overcome high temperature embrittlement problem, adding manganese is one of the good methods. Manganese makes Mn-S compound having a high melting temperature above 1500℃. In this work, the mechanical properties of Ni-Mn deposited layers were investigated by using various process variables such as concentration of Mn(NH2SO3)2, current density, and bath temperature. As the Mn content of electrodeposited layers was increased, internal stress and hardness were increased. By increasing current density, internal stress increased, but hardness decreased. With increasing the bath temperature from 55 to 70℃, internal stress of Ni deposit layers decreased, but hardness didn``t change by bath temperature. It was likely that eutectoid manganese led to lattice deformation, and the lattice deformation increased hardness and internal stress in Ni-Mn layers. Increasing current density and decreasing bath temperature would increase a mount of H2 absorption, which was a cause for the rise of internal stress.
-
열산화법 및 PECVD 법에 의한 T$a_2O_5$ 유전 박막
문환성,이재석,한성욱,박상균,양승기,이재학,박형호,박종완,Mun, Hwan-Seong,Lee, Jae-Seok,Lee, Jae-Seok,Lee, Jae-Seok,Yang, Seung-Gi,Lee, Jae-hak,Park, Hyung-ho,Park, Jong-wan 한국재료학회 1992 한국재료학회지 Vol.2 No.5
열산화법과 PECVD법으로 p-type (100) Si 기판위에 T$a_2O_5$ 박막을 형성시킨 후 A1/T$a_2O_5$/p-Si capacitor를 제작하였다. 제작된 시편의 제반 물성은 XRD, AES, high frequency C-V analyzer, I-V meter, TEM 등을 사용하여 분석하였다. XRD 분석을 통해 T$a_2O_5$ 박막은 비정질임이 확인되었으며 65$0^{\circ}C$ 열처리의 경우에는 hexagonal $\delta$-T$a_2O_5$ 상으로 결정화가 일어남을 확인할 수 있었다. AES spectrum의 분석을 통해 T$a_2O_5$ 박막의 조성이 2:5의 stoichiometry에 근접해 있음이 관찰되었다. 열산화법에 의해 제작된 T$a_2O_5$는 산화온도 60$0^{\circ}C$의 조건에서 누설전류 5${ imes}10^{-6}$A/c$m^2와 유전상수 31.5로 가장 좋은 성질을 나타냈으며, PECVD로 제작한 T$a_2O_5$는 RF Power가 0.47W/c$m^2일 때 2.5${ imes}10^{-5}$A c$m^2and 24.0으로 가장 좋은 특성을 나타내었다. TEM 분석을 통해 제조된 박막과 계면을 관찰하였다. Thermal oxidation and plasma enhanced chemical vapor deposition of tantalum oxide thin films on p-type (100) Si substrates were studied to examine the dielectric nature of T$a_2O_5$ as a Al/T$a_2O_5$/p-Si capacitor. Microstructure and dielectric properties of the capacitors were investigated by XRD, AES, high frequency C-V analyzer, I-V meter and TEM. XRD analysis showed that the structure of T$a_2O_5$ films were amorphous, but the films were crystallized to hexagonal $\delta$-T$a_2O_5$ by 65$0^{\circ}C$ thermal oxidation treatment. It was found that the stoichiometry of the films was more or less close to 2 : 5. Leakage current density and relative dielectric constant of thermal oxidation T$a_2O_5$ film at 60$0^{\circ}C$ was 5.0${ imes}10^{-6}$/A/c$m^2 and 31.5, respectively. In the case of PECVD T$a_2O_5$film deposited at 0.47W/c$m^2 they were 2.5${ imes}10^{-5}$/A/$ extrm{cm}^2$ and 24.0, respectively. The morphology of the films and interfaces were investigated by TEM.
-
니켈-인 도금 층의 기계적 성질에 미치는 아인산 농도의 영향
강수영(Soo Young Kang),양승기(Seung gi Yang),황운석(Woon suk Hwang) 한국표면공학회 2015 한국표면공학회지 Vol.48 No.3
The nickel alloys gets a great deal of attention due to their good mechanical, chemical and magnetic properties. Especially Ni-P alloy systems are very attractive due to their good corrosion resistance and the wear resistance in important technological applications. In this study, the effects of phosphorus acid concentration in plating solution on composition of Ni-P alloy coatings were studied. The Ni-P electrodeposits of the various P contents were investigated in order to understand effect of the composition on mechanical properties of Ni-P electrodeposits. The mechanical properties of electrodeposits increased as the P content in electrodeposits increase. The results of mechanical properties were explained by grain size and P solid solution effect. The effects of heat treatment on mechanical properties of Ni-P alloy coatings were also studied.
-
착화제와 pH가 무전해 Ni-Co-P 도금 피막의 석출거동에 미치는 영향
최벽근 ( Byuck Keun Choi ),양승기 ( Seung Gi Yang ),신지웅 ( Ji Wung Shin ),황운석 ( Woon Suk Hwang ) 한국부식방식학회(구 한국부식학회) 2014 Corrosion Science and Technology Vol.13 No.3
Electroless plated Ni-Co-P films have been used to suppress the electromagnetic waves from magnetic recording media, and the suppression is known to be achieved with films made with optimized plating composition and plating condition. Effects of complexing agents on the deposition rate and bath stability of Ni-Co-P film were studied using sodium citrate, sodium tartrate and multi-complex agents containing both of them. Deposition of electroless Ni-Co-P platings was dependent upon the complexing agents. Deposition rate was twice when using sodium tartrate compared to that using sodium citrate. And it was slightly slower with multi-complex agents than with sodium tartrate, bath stability being declined in the former. Deposition rate increased with increasing pH until pH 11. Excellent bath stability and good deposition rate were obtained using multi-complex agent as sodium citrate 0.10 mol/L and sodium tartrate 0.15 mol/L in the electroless Ni-Co-P plating films.
-
가시광촉매를 이용한 자동차 내장재로부터 발생하는 VOCs의 저감연구
최세영 ( Sei Young Choi ),양승기 ( Seung Gi Yang ) 한국고무학회 2013 엘라스토머 및 콤포지트 Vol.48 No.3
가시광촉매를 이용하여 자동차 내장재에서 발생하는 VOCs의 저감 효과를 알아보았다. 가시광촉매는 sol-gel법으로 제조하였으며 UV-vis peak가 420 nm에서 적색이동 되어 가시광영역에서 감응하는 것으로 나타났다. 이러한 특성을 갖는 가시광촉매를 자동차 내장재에 코팅처리하고, 자동차 내장재에서 발생하는 VOCs를 측정한 결과 분해·저감율이 우수하게 나타났다. On this study, visible-light responsive photocatalyst prepared by sol-gel method was evaluated the effect of the reduction of volatile organic compounds (VOCs) occurred in vehicle interior and its property was examined. According to UV/visible result, visible-light responsive photocatalyst was found that the UV-visible peak is red shift at 420nm, is sensitive in the visible light region. With vehicle interior parts and materials coated visible-light responsive photocatalyst, VOCs was measured by GC/MS. Measuring the VOCs generated from vehicle interior parts and materials, the reduction of VOCs was confirmed.
-
강수영(Soo Young Kang),이정자(Jeong Ja Lee),양승기(Seung gi Yang),황운석(Woon suk Hwang) 한국표면공학회 2015 한국표면공학회지 Vol.48 No.2
Nickel is a commercially important and versatile element in electroplating. The applications of nickel electroplating fall into three main categories: decorative, functional and electroforming. In decorative applications, electroplated nickel is most often applied in combination with electrodeposited chromium. Nickel is deposited on surfaces to improve corrosion and wear resistance or modify magnetic and other properties. Electroforming is electroplating applied to the fabrication of products of various kinds. Nickel is deposited onto a substrate and then removed from it to create a part made entirely of nickel. In this study, mechanical property of Ni electrodeposits in various manufacturing condition such as temperature, current density, pH and electrolyte content, was investigated to understand effect of electrolysis condition on mechanical property. Vickers hardness increased as the temperature and pH increased and current density and electrolyte content decreased and pH increased. The results were explained by cathode overvoltage and hydrogen evolution.
ScienceON
KISS연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
