http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
MCF 세포의 효율적인 분리를 위한 DEP 를 기반으로 한 세포 분리기의 설계와 적용
안재민(Jaemin An),박정렬(Jungyul Park),김영호(Youngho Kim),박석호(Sukho Park),김병규(Byungkyu Kim),박종오(Jongoh Park),이상호(Sangho Lee) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.11
This paper presents the development of a novel dielectrophoresis (DEP)-activated cell sorter (DACS) that has 3D-asymmeritc microelectrodes. The DACS conventionally utilizes relative strength between the DEP and drag forces. While the conventional cell separators usually depend on different size of cells, the new system differentiates similarly- sized cells by the difference of the electrical properties among cells. It distinguished different types of cells by their differences in electrical properties, conductivity and permittivity. Thus, continuously varying DEP forces generated by the system enabled us to separate MCF10A cells (normal cells derived from human breast epithelium) and MCF7 cells (human breast cancer cells) that have similar sizes. Applying the newly-developed system to separate two different cells, it was possible to separate cancer cells among normal cells.
유전영동을 이용한 입자분리기의 효율적인 분리를 위한 전극 형태
안재민(Jaemin An),채승엽(Seungyeub Chae),박석호(Seungyeub Chae),김병규(Byungkyu Kim) 대한기계학회 2009 大韓機械學會論文集A Vol.33 No.1
This paper presents the optimal shape of microelectrode that generates dielectrophoretic(DEP) force to separate particles in homogeneous medium. The principle of the particles sorting is based on the use of the relative strengths of negative DEP (nDEP) and drag forces, as in a general DEP-activated cell sorter (DACS). To numerically calculate the DEP force and drag force, the simulation is implemented in MATLAB 7.0. The properties of particles, which are used in simulation, are similarly selected as those of cells to apply cell separation. The most optimized shape of electrode is selected by numerical simulation according to a variety of electrode shape such as rectangle, trapezoidal, and right-triangle. Through, in addition, parameter study, we found that applied frequency is more significant factor on the separation than various parameters, such as applied voltage and permittivity of medium, that decide on the strength of DEP force.
하나의 이중 모드 공진기를 이용한 대역 통과 필터 설계
안재민(Jaemin An),임영석(Yeongseog Lim) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.12
본 논문에서는 하나의 이중 모드 공진기를 이용한 대역 통과 필터의 새로운 설계 방법을 제안한다. 제안한 설계 방법은 이중 모드 공진기를 두 개의 단일 공진기로 보고 공진기 사이의 결합 계수를 구하여, 이를 바탕으로 이중 모드 공진기의 두 공진 주파수를 계산한 후 필터 전송 영점의 위치에 따라 각각 배치하였다. 제안한 설계방법을 검증하기 위해, E-모양의 이중 모드 공진기를 이용하여 WLAN 서비스 대역을 만족하고, 전송 영점이 각각 상측과 하측에 위치하는 대역 통과 필터를 설계?제작하였다. This paper proposes a new design method of bandpass filter with single dual-mode resonator. In the proposed method, a coupling coefficient between two resonators was obtained by considering a dual-mode resonator as two single resonators. Based on the obtained coupling coefficient, two resonant frequencies of dual-mode resonator were calculated and then arranged according to a transmission zero's location of required filter. To verify the proposed theory, two WLAN bandpass filters which have a transmission zero to a lower and an upper stopband repectively were designed and implemented.
우수한 차단 대역 특성과 통과 대역 내에 저지 대역을 갖는 UWB 대역 통과 필터 설계
안재민(Jaemin An),김유선(Yuseon Kim),표현성(Hyunseong Pyo),이혜선(Hyesun Lee),임영석(Yeongseog Lim) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.1
분산 소자로 이루어진 고역 통과 필터의 최적화된 응답을 이용하여 우수한 차단 대역 특성과 통과 대역 내에 저지 대역을 갖는 UWB 대역 통과 필터를 설계?제작하였다. 변형된 고역 통과 필터의 등가 회로를 분산 소자로 구성하고, 최적화를 통해 FBW 100 % 이상의 넓은 통과 대역을 갖도록 하였다. Desegmentation technique로 급전 선로간의 커플링 효과를 분석하고, 이를 이용하여 통과 대역 상, 하측의 우수한 차단 특성을 구현하였다. 또한, 최근 문제가 되고 있는 Wireless LAN과 Hyper LAN 대역(5.15~5.825 ㎓)에서의 간섭 문제 해결을 위해, spurline을 추가하여 대역 저지를 실현하였다. 제작된 필터는 3.1~10.55 ㎓의 통과 대역과 0.94 ns 이하의 평탄한 군 지연 응답을 보였고, 통과 대역 양단의 우수한 차단 대역과 5.2~6.12 ㎓의 저지 대역이 측정되었다. In this paper, we designed and fabricated a ultra-wideband(UWB) bandpass filter with a good performance of a stopband, and a notched band in passband. The transformed equivalent circuit of the highpass filter was realized by distributed element. A wide-passband with 3-㏈ fractional bandwidth of more than 100 % was achieved by using optimum response of the HPF. For improving lower and upper stopband characteristic, a cross coupling between feed lines was employed, which was analyzed by desegmentation technique. In order to reject interference of Wireless LAN and Hyper LAN(5.15~5.825 ㎓), the narrow notched(rejection) band was realized by a spurline. The fabricated BPF indicated the passband from 3.1 to 10.55 ㎓ and the flat group delay of less than 0.94 ns over the entire passband except the rejection band. The filter shown sharp attenuation both inside and outside the band and notched band from 5.2 to 6.12 ㎓.
고 효율 인덕터를 이용한 우수한 고조파 억압 특성을 갖는 저역 통과 필터 합성 및 설계
김유선(Yuseon Kim),안재민(Jaemin An),표현성(Hyunseong Pyo),이혜선(Hyesun Lee),임영석(Yeongseog Lim) 大韓電子工學會 2009 電子工學會論文誌-TC (Telecommunications) Vol.46 No.9
This paper propose the new approach of the quantity effect by high efficiency inductor characteristic to the harmonic suppression of the lowpass filter. We applied the reliable de-embedding process in order to extract the precise elements values. Moreover, for the effective its application and comparison, the variable stepped impedance low pass filters with a same specification are designed. The proposed procedure is expected to handle the overall filter performance and to construct a synthesized equivalent circuit from its determined specification. 본 논문에서는 고 효율 인덕터 특성이 저역 통과 필터의 고조파 성분 억제에 미치는 정량적인 영향에 관한 새로운 접근 방안을 제안한다. 적용될 고 효율 인덕터의 정확한 소자 값들을 추출하기 위해 신뢰성 있는 De-embedding 과정을 적용 하였다. 게다가, 이들의 효과적인 적용 및 비교를 위해, 같은 스펙을 갖는 다양한 계단 임피던스 저역 통과 필터들을 각각 설계하였다. 제안된 과정은 전체 필터 성능을 제어하고 정해진 스펙으로부터 합성되는 등가 회로를 구성하기 위해 효과적으로 응용될 것이라 기대된다.
상 · 하측 대역의 대역폭 조절이 가능한 이중 대역 대역 통과 필터 설계
표현성(Hyunseong Pyo),안재민(Jaemin An),김경근(Kyoungkeun Kim),임영석(Yeongseog Lim) 한국전자파학회 2011 한국전자파학회논문지 Vol.22 No.1
E 모양의 이중 모드 공진기를 변형하여 상?하측 대역의 대역폭 조절이 가능한 이중 대역 통과 필터를 설계?제작하였다. 변형된 E 모양의 이중 모드 공진기를 이용하여 even 모드 간의 결합이 odd 모드 공진점에 영향을 미치지 않게 만들었고, 이를 통하여 상측 대역의 대역폭을 효과적으로 조절할 수 있다. 그리고 급전 선로간의 결합을 통하여 차단 대역에 전송 영점을 발생시켜 차단 특성을 높였다. 대역폭 조절이 가능함을 보이기 위해 중심 주파수 2 ㎓와 3 ㎓에서 140 ㎒의 동일한 대역폭을 갖는 필터를 설계하였다. In this paper, we designed and fabricated a dual-band bandpass filter which can control upper and lower bandwidth using the transformed E-shaped dual-mode resonator. The filter is made the coupling between even-mode not to affect odd-mode resonant frequency by the transformed resonator to control upper bandwidth effectively. The cross coupling between input and output feed lines was employed to improve stopband characteristic. The bandpass filter has been designed to indicate the same bandwidth at center frequency 2 ㎓ and 3 ㎓ to show to control bandwidth.
LTCC 적층 필터를 위한 기생 성분 해석 및 필터 설계
이혜선(Hyesun Lee),김유선(Yuseon Kim),표현성(Hyunseong Pyo),안재민(Jaemin An),임영석(Yeongseog Lim) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.8
본 논문에서는 선행 연구된 LTCC(Low Temperature Co-fired Ceramic) 적층형 대역 통과 필터 구조에 대해 기생 성분을 고려한 등가회로를 제시하고 SOC(Short-Open Calibration) 기법을 적용하여 소자값을 추출하는 과정을 보인다. 추출된 소자 값을 제시한 등가회로에 적용함으로써 위성 DMB에 적용 가능한 2차 LTCC 필터를 설계 제작하였다. 비유전율 7.8의 Dupont951을 사용하여 제작된 필터의 크기는 2.4×3.8×0.378 ㎣이다. 측정 결과 1.4 ㏈의 삽입 손실과 32.3 ㏈의 반사 손실을 보였으며 설계 사양과 대체로 일치함을 보인다. In this paper, we present a equivalent circuit considered parasitic elements about LTCC multi-layer BPF structure that was studied previously and a process of extraction of the element value using SOC technique. By applying extracted element values to equivalent circuit, 2th LTCC filter was designed and fabricated that was applied to satellite DMB. The filter was fabricated of Dupont951 substrate with relative permittivity of 7.8, the dimension of the fabricated filter is 2.4×3.8×0.378 ㎣. The measurement results indicate 1.4 ㏈ of insertion loss and 32.3 ㏈ of return loss, which are in good agreement with simulated ones.