http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
안광희,김홍석,An, Gwang-Hui,Kim, Hong-Seok 배재대학교 공학연구소 2005 공학논문집 Vol.7 No.1
일반적인 지질조사에서는 많은 양의 지질구조 측정을 위하여 수동 컴퍼스를 사용하고 있다. 암반사면의 건축과 터널의 증가로 인해 좀 더 정밀한 지질조사 요구 때문에 휴대용 다용도 디지털 컴퍼스가 필요하다. 이 시스템은 마이크로 컨트롤러로서 Intel PXA 255 임베디드 보드가 사용되어 만들어졌으며, 기울기 센서, 방위각 센서, 그리고 위성항법장치로 구성되어져 있다. 우리가 개발한 시스템으로 측정되어진 경사 값과 주향 값, 그리고 위치 값은 PDA나 노트북으로 전송되어 지질구조 분석을 위하여 쓰여질 것이다. 본 논문에서 개발된 값싸며 성능이 향상된 디지털 컴퍼스는 광대한 지질 조사에 있어서 많은 비용과 시간을 절약하는 역할을 하리라 기대된다. Conventional geological survey utilizes the manual compass for mass amount of measurements of the geologic structure. Portable multifunction digital compass system was required by more detailed geological survey, due to increasing construction for rock slopes and runnels. In this paper, the system was implemented by using Intel PXA 255 embedded board as a system controller, and was composed of tilting sensor, digital azimuth sensor, and Global Positioning System (GPS) module. After the measured location, strike, and the angle of dip with our implemented system were transmitted to Personal Digital Assistant (PDA) or notebook, these data could be used for geologic structure analysis. It is expected that the availability of cheap and improved digital compass will reduce the coast and time of geological survey extensively.
상추 (Lactuca sativa L.) callus로부터 ACAT 억제 활성물질, phytol의 생산
안광희,장태오,백남인,김세영,An, Kwang-Hee,Jang, Tae-O,Baek, Nam-In,Kim, Se-Young 한국식물생명공학회 2002 식물생명공학회지 Vol.29 No.1
상추의 기내 callus 배양으로부터 ACAT (Acyl-CoA: Cholesterol acyltransferase) 억제 활성물질로 알려진 phytol 의 생산가능성이 연구되었다. Callus는 0.5mg.L$^{-1}$ NAA가 첨가된 MS 배지에 4주간 치상된 자엽 절편체로부터 유도되었으며, 다양한 수준의 chlorophyll을 함유하고 있었다. Phytol이 chlorophyll분자를 구성하는 물질로 알려져 있음에 도 불구하고, phytol의 추출량은 녹색의 자엽에서 보다 callus 에서 높게 나타났다. GC 분석결과, phytol의 추출량은 callus의 chlorophyll 함량과 비례하지 않는 것으로 나타났으며, callus의 chlorophyll 함량수준은 callus의 형성능과 관련이 있는 것으로 사료되었다. 본 연구의 결과는 phytol의 기내생산에 있어서 상추의 callus 배양의 잠재성을 제시한다 하겠다. The possibility for mass production of phytol, inhibitory diterpene against ACAT (Acyl-CoA: Cholesterol acyltransferase) was investigated by using callus culture of lettuce. The callus were induced from lettuce cotyledon explants on MS medium containing 0.5 mg.L$^{-1}$ NAA after 4 week's culture. Adventitious roots were formed from the explants on MS medium containing 0.5 mg.L$^{-1}$ IBA or 1.0 mg.L$^{-1}$ NAA. Adventitious shoots and roots were emerged from the callus when the callus was transferred to MS medium containing auxin alone, or with cytokinin. The plant growth regulators and their concentrations for the organogenesis were 1.0 mg.L$^{-1}$ NAA, 0.1 mg.L$^{-1}$ BA, 0.5 mg.L$^{-1}$ NAA with 0.1 mg.L$^{-1}$ kinetin, or 0.5 g.L$^{-1}$ 2.4-D with 1.0 mg.L$^{-1}$ kinetin. Analyses of chlorophyll contents showed that chlorophyll contents were higher in morphogenic calli than in non-morphogenic calli. However, the chemical analyses of gas chromatography indicated that phytol contents were not proportionate to the chlorophyll contents of callus. The content of phytol was higher in callus than in lettuce cotyledon.ledon.
박찬원,안광희,Park, Chan-Won,An, Kwang-Hee 한국조명전기설비학회 1997 조명.전기설비 Vol.11 No.1
본 연구에서는 계량 설비에 사용되는 스마트형 디지털 로드셀을 개발하였다. 로드셀 센서는 중량의 변화에 대해 매우 민감하여햐 하므로 정밀한 A/D변환을 위하여 온도 안정성, 낮은 드리프트 특성 그리고 분해능이 우수하여야 한다. 단일칩 마이크로프로세서에 의해 제어되는 고안된 아날로그 회로로써 OP엠프 오프셋과 드리프트 특성을 저감시키며 소프트웨어 알고리즘에 의해 안정되고 정밀한 A/D 변환이 가능하도록 디지털 로드셀을 설계하였다. 또한 RS-485통신 방식으로 로드셀을 제어하고 보정용 데이터와 제어 데이터를 기억시키는 기능들도 포함하였다. 시뮬레이션과 실측 평가를 통하여 개발된 로드셀의 우수성을 입증하였으며, 본 연구의 결과는 원격계량 센서로서 계량 설비 분야에 유용한 활용이 기대된다. This paper describes the design and development of a smart digital load cell used forweighing installations. Sice the load cell sensor to be used is very sensitive for weight cariation, the load cell must have the temperature stability, low-drift and the high-resolution of the A/D conversion for accuracy. A new analog circuit which is controlled by one chip micro-processer has been developed to reduce the offset voltage and the drift characteristics of operational amplifiers, and has been adapted into the digital load cell. Also, a software algorithm has been developed to obtain the stable and accurate A/D conversion. This software includes a RS-485 communication program to control the digital load cell, which gives a capability of backing-up the calibration data and transferring control data. The simulation and evaluation of the designed digital load cell has been shown as having the good performance. which will give useful application to the weighing installations as a remote weighing sensor.
김용규(Kim, YongKew),안광희(An, Kwanghee),김일도(Kim, iL Do),김은중(Kim, eun jung),김철웅(Kim, Cheol Ung) 한국자동차공학회 2012 한국자동차공학회 학술대회 및 전시회 Vol.2012 No.11
Our focus is on a holistic approach to the concept development of innovative vehicle Layout and optimized vehicle body structure, using the latest advanced steels and lightweight technologies such as Hydro-forming and Hot Stamping, Our body structure achieved a mass savings of 28kg(-10%) compared to the baseline body structure mass. (Base BIW : G-SEG)