http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
감마선 조사에 의해 제조된 키토산/아크릴산 하이드로겔의 특성
심재운 ( Jae Woon Shim ),강필현 ( Phil Hyun Kang ),박성은 ( Sung Eon Park ),노영창 ( Young Chang Nho ) 한국공업화학회 2002 공업화학 Vol.13 No.7
키토산(chitosan)을 아크릴산에 용해시킨 후 개시제 혹은 가교제를 필요로 하지 않는 감마선을 이용해 약물 전달용 하이드로겔을 제조하고 그 특성을 조사하였다. 키토산과 아크릴산의 조성비를 각각 0.1∼1.5 wt%와 30, 50, 70 vol%로 혼합하여 30∼70 KGy의 조사량으로 감마선 조사하여 제조된 하이드로겔의 겔함량은 96% 이상이었으며, 키토산과 아크릴산의 비율이 증가할수록, 조사량이 증가할수록 99%까지 증가하였다. 제조된 겔의 팽윤도는 키토산과 아크릴산의 비율이 증가할수록, 조사량이 증가할수록 감소하였으며, 20 h 내에서 급격히 증가하다가 서서히 평형에 도달하였다. 또한, 감마선 조사로 제조된 chitosan/AAc 겔을 pH 1∼12에서 팽윤시킨 결과, 용액의 pH가 증가 할수록 팽윤도도 증가하였으며, pH 12에서 가장 큰 값을 나타내었다. 이러한 겔의 팽윤 특성은 감마선 조사에 의해 형성된 가교결합과 이온화된 amino기와 carboxyl기의 작용에 의한 것임을 FT-IR과 SEM 관찰로 확인할 수 있었다. The chitosan/acrylic acid (AAc) hydrogels for drug delivery were synthesized with polymerization of acrylic acid in the presence of chitosan mitiated by gamma-ray irradiation and their characteristics were investigated. Various chitosan/AAc hydrogels were prepared with the different ratios of chitosan (0.1∼1.5 wt%), acrylic acid (30, 50, 70 vol%) and radiation dose (30∼70 KGy). The gel contents of hydrogels were more than 96%, and as the ratios of chitosan/acrylic acid and radiation dose were increased, it increased to 99%. The swelling degrees of chitosan/AAc hydrogels decreased as the ratio of chitosan/acrylic acid and radiation dose increased, and reached equilibrium within 20 h. In the pH range of 1∼12, chitosan/AAc hydrogels were more swollen at high pH than low pH, and showed the largest swelling occurred at pH 12. FTIR as well as SEM results indicated that the swelling characteristics of chitosan/AAc hydrogels were due to the cross-linking of ionized amino and carboxylic functional groups by gamma irradiation.
구리 , 니켈의 흡착에 대한 활성탄소섬유 표면 처리의 영향
유승곤,심재운 한국화학공학회 1998 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.36 No.6
비표면적이 각기 다른 활성탄소섬유를 산, 염기로 표면 처리하여 구리(II), 니켈(II)에 대한 흡착량의 변화와 표면 관능기의 영향을 조사하였다. NaOH로 처리한 섬유보다 HNO₃와 HCl로 처리한 섬유의 비표면적이 33%까지 크게 감소하였다. 적정법에 의한 결과, HNO₃로 처리한 활성탄소섬유의 표면에 많은 관능기가 도입됨을 알 수 있었다. 구리(II), 니켈(II)에 대한흡착략은 A15의 경우 표면에 존재하는 관능기의 영향을 받았으며, A20의 경우는 표면 관능기보다 비표면적의 영향이 더 큰 것으로 나타났다. After modifying ACFs with oxidizing reagent, the adsorption characteristics of Cu(II)n and Ni(II) ions are investigated into the amount adsorbed and the change of surface functional group. In comparison with ACF treated with NaOH, the specific surface area of ACF modified by HNO₃ and HCl is decreased to 33 %. The results of titration method show that, in case of being modified by nitric acid, more surface groups were introduced to ACF. The amount of Cu(II) and Ni(II) adsorbed on A15 was mainly influenced by the surface functional groups, while the surface area of A20 is more important factor for metal removals.
문승현,심재운 한국대기환경학회 2004 한국대기환경학회지 Vol.20 No.5
An adsorption process to recover the pure CH₄and CO₂from its mixture was examined. In this study, activated carbon fibers were used as a selective adsorbent. The activated carbon fibers has 78~94% micropore volume and 10.5~20.3Å narrow pore size, and showed high adsorption rate and the good selectivity for CO₂under the ambient pressure. The ACF with high surface area showed short mass transfer zone and long breakthrough time and, its adsorption capacity depended on the microporosity. Compared with single component adsorption, the amount adsorbed CO₂on ACF increased by the roll-up of CH₄in mixed gases. The adsorption selectivity increased as now rate and CO₂concentration of mixed gases increased, showing 5.2 selectivity for 75% CO₂concentration.
유승곤,오원진,정종헌,심재운,정현희 한국화학공학회 1997 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.35 No.2
활성탄소섬유와 활성탄소 고정탑을 통한 수용액으로부터의 크롬(VI)의 흡착량은 활성탄소섬 유와 활성탄의 비표면적에 비례하였으며 활성탄소섬유가 활성탄소에 비해 1.5배만큼 흡작속도가 빨랐다. 크롬(VI)이 흡착되는 동안 유출액의 pH는 수산화이온(OH)의 발생에 의해 증가하였다. 10^(-3)M 이하의 농도에서는 흡착이 잘 되었으나 크롬(VI)의 동도가 증가할수록 흡착제가 친화력이 약한 Cr₂O_7²이 HCrO₄ 보다 증가하여 유출액의 상대농도값이 초기에 증가하는 현상이 나다났다. 유속이 빠를수록 입자 주위의 경막저항이 감소하여 흡착속도가 증가하였으나 흡착량은 일정하였다. 농도 profile이 정형분포를 형성하기 위한 최소 길이는 미사용층의 길이와 거의 일치하였다. The amount of Cr(VI) adsorbed from aqueous solution in AC and ACF packed column was in proportion to specific surface area of AC and ACF, and the adsorption rate of ACF was 1.5 times faster than that of AC. Owing to release of OH, the pH of solution was increased during adsorption of Cr(VI). The adsorption of Cr(VI) was well performed under 10^(-3)M concentration. However, as the concentration increase, the effluent concentration was suddenly increased in the beginning of flow, which was due to the increase of molar ratio of Cr₂O_7² to HCrO₄. Although the adsorption rate was increased in higher flow rate because of decreasing in film resistance, the amount adsorbed was constant. The minimum bed length for constant pattern was coincided with the length of unused bed.