http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신일재(Il-Jae Shin),강준호(Jun-Ho Kang),서영호(Young-Ho Suh) 한국암반공학회 2005 터널과지하공간 Vol.15 No.5
NATM 터널을 굴착하기에 토피가 너무 낮은 경우에는 보통 개착터널공법이 적용된다. 그러나 토피가 매우 낮거나 없는 계곡부에서 개착터널을 시공하기 위해서는 추가적인 두 곳의 갱구 형성과 복토가 이루어질때까지 임시 사면에 대한 유지관리가 필요하다. 이런 경우에는 복토를 통해 토피를 확보한 후 터널을 굴착하는 방안이 유효하다. 이 연구는 터널 굴착이전에 소일시멘트로 복토한 후 굴착작업이 이루어진 대만고속철도 C240 현장에 대한 사례 연구이다. 소일시멘트의 포틀랜드 시멘트 함유량은 2∼4%이고, 1회 복토층의 두께는 130∼250㎜ 범위가 되도록 시공하였다. 터널 굴착에 따른 소일시멘트 사면 및 터널내 최종 구조물인 콘크리트 라이닝에 대한 수치해석을 통해 안정성을 평가하였다. In case the overburden of a tunnel is too low to adopt NATM, cut and cover method generally can be chosen as alternative. However, in tunneling some area with very low or no overburden between two mountains, the cut and cover method requires additional construction of a couple of tunnel portals and the maintenance of portal slopes until backfilling is completed. As a solution for this problem, increasing the tunnel overburden by raising the ground level can be effective. This paper presents the case study for tunneling at C240 site in Taiwan High Speed Railway(THSR) in which soil-cement filling method was used for pre-banking before tunnel excavation. Cement content of filling material was 2~4% and thickness of filling a round was 130~250 ㎜. The stability evaluation for the soil-cement slope and concrete lining of low cover tunnel was conducted by numerical analysis.
실내모형시험을 통한 연약지반의 쉴드 TBM 터널굴착 모사
한명식,김영준,신일재,이용주,신용석,김상환,Han, Myeong-Sik,Kim, Young-Joon,Shin, Il-Jae,Lee, Yong-Joo,Shin, Yong-Suk,Kim, Sang-Hwan 한국터널지하공간학회 2013 한국터널지하공간학회논문집 Vol.15 No.5
This paper presents the shield TBM technology in soft ground tunnelling. In order to perform this study, a scale model test was carried out using the developed small scaled shield TBM machine. The various instrumentations were conducted during the simulation of tunnelling. In addition, the ground behavior due to the shield TBM operation parameters was measured during the simulation. Based on the simulation results, the stability of the ground was evaluated and the fundamental shield TBM tunnelling technique in the soft ground was suggested. In conclusion, design's reliability through laboratory small scale model test about Shield-TBM section was obtained, and both the improvement plan for safety during construction and the construction plan for securing airport runway's safety during tunnel passing by Shield-TBM propulsion were suggested. 본 논문에서는 연약지반에 건설되는 Shield TBM 터널의 시공기술을 제시하였다. 이 연구를 수행하기 위하여 Shield TBM 장비를 축소 제작하여 축소모형 시험을 수행하였으며, 쉴드터널 굴착을 모사하기 위하여 다양한 장비들이 적용되었다. 또한 축소모형시험 중 Shield TBM 장비로 인해 발생되는 지반의 거동을 계측하였으며, 지반의 안정성은 시뮬레이션 결과를 토대로 평가하였다. 이를 바탕으로 쉴드터널의 안전한 시공을 위한 기초자료로 활용하고자 한다. 결론적으로 Shield-TBM 구간에 대한 실내축소모형시험을 통하여 설계의 신뢰성을 확보하고, 시공 시 안전을 위한 개선사항 등과 특히, Shield TBM 추진시 쉴드터널이 통과하는 공항 활주로의 안정성을 확보하기 위한 시공방안을 제시하고자 한다.
변상훈(Sang-Hun Byun),정재호(Jae-Ho Jeong),전덕찬(Duk-Chan Jun),신일재(Il-Jae Shin),심동현(Dong-Hyun Sim) 한국암반공학회 2011 터널과지하공간 Vol.21 No.4
최근, 서울시는 기존 서부간선도로의 극심한 교통정체 문제 해결을 위하여 연장 10.91 ㎞에 달하는 새로운 소형차 전용 지하도로를 계획하였으며, 국내최초로 복층터널 형식을 적용하였다. 새로 건설될 서부간선 지하도로가 밀집한 도심지의 대심도 지하공간에 계획되므로, 인명피해 최소화를 위한 환기 및 방재계획이 중요한 문제로 대두되었으며, 본 고에서는 도심지 대심도 초장대 터널내 설비 및 안전시설에 관한 주요계획을 소개하고자 한다. The west underground express way is a recent initiated BTO (Build-Transfer-Operate) project for releasing heavy traffic of the existing west express way which is notorious on-ground road for extremely traffic stuck area in the west of Seoul, South Korea. The new express way for light vehicles is the first double-deck tunnel ever designed in South Korea and 10.91 ㎞ long including both open cut structures and concrete lining with middle-deck in bored tunnel. Because the new express way is going through underground of heavily populated area, mechanical & electrical design for the safety of drivers in tunnel is one of the most important parts among many design issues. This paper discusses M & E design focuses including ventilation-evacuation plan and various safety facilities.