RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        포뮬러 형태 자작자동차의 경량화 및 주행 성능 향상을 위한 최적설계에 관한 연구

        신상원(Sang-Won Shin),강신욱(Sin-Wook Kang),하승현(Seung-Hyun Ha),박진표(Jin-Pyo Park),김대완(Dae-Wan Kim),이무연(Moo-Yeon Lee) 한국산학기술학회 2017 한국산학기술학회논문지 Vol.18 No.10

        경량화는 현재 자동차 산업에 있어 가장 중요하게 여겨지는 화두 중 하나이다. 내연기관은 물론 미래형 자동차, 친환경 자동차 개발을 위해 경량화는 자동차 산업에 있어서 결코 빠질 수 없는 소재이다. 친환경 자동차를 개발하는데 있어 연비향상과 주행성능향상은 경량화가 핵심이기 때문이다. 본 연구팀에서도 포뮬러 형태의 자작자동차를 제작하면서 경량화와 최적설계를 통한 주행 성능 향상에 주안점을 두고 연구를 시작하였다. 본 연구는 전년도 제작 차량을 바탕으로 다음의 네 가지 항목으로 나누어 진행하였다. 첫 번째, 엔진의 교체를 통한 엔진룸의 구조설계 및 경량화. 두 번째, 프레임의 최적설계를 통한 부재의 단순화 및 경량화 연구. 세 번째, 프레임의 최적설계에 따른 서스펜션의 구조설계 및 해석. 마지막으로, 업라이트와 허브의 설계 및 경량 부품 사용을 통한 경량화 등이다. 이러한 목표설정을 두고 차량 설계를 진행하였으며 결과적으로 전년도 차량대비 48 kg을 감량하여 19.5% 만큼의 경량화 하였고 이에 가속도 또한 80 m 기준 6.65 s에서 5.8 s만큼 단축시켰다. Weight reduction is one of the important issues in the automotive industry and the development of internal combustion engines vehicles, future vehicles, and eco-friendly vehicles for improving fuel efficiency. The objective of this study is to investigate the improvement of driving performance by weight reduction and optimum design for a formula-type self-designed on-road vehicle. This study is divided into the four steps. Firstly, the engine room was replaced and designed with a lighter engine. Secondly, an optimization study was conducted to simplify and lighten the vehicle components with the design of the frame. Thirdly, the structure design was optimized and the suspension was analyzed with the design of the frame. Finally, the design of an upright and hub with reduced weight was carried out usinglighter parts. As a result, we reduced the weight of the vehicle by 48.5kg compared to the previous year (19.5%) and increased the acceleration from 6.8 s to 5.8 s.s.

      • KCI등재후보

        란탄계열 원소를 활성체로 첨가한 LiPO3 유리 섬광체의 제작과 섬광특성

        황주호 ( Hwang Ju Ho ),정석준 ( Jeong Seog Jun ),신상원 ( Sin Sang Won ),최석호 ( Choe Seog Ho ),수마로코프 ( S. Yu. Sumarokov ) 한국센서학회 2003 센서학회지 Vol.12 No.3

        LiPO₃에 란탄계열의 원소를 활성체로 첨가하여 `LiPO₃: Lanthanides` 유리 섬광체를 제작하였다. 최적의 가열 조건에서 유리 섬광체를 제작하여 광발광(photoluminescence, PL) 특성을 분석하였다. 유리 섬광체의 투명도가 최적이 되는 온도 950℃, 시간 90분의 조건에서 제작하였으며, 발광스펙트럼 측정 결과 란탄계열의 원소 중 Pr, Nd, Gd, Ho, Er, Tm, Yb, Lu은 고유의 발광 스펙트럼이 형성되지 않아 활성체로서의 적용이 불가능한 것으로 나타났다. Eu^(2+) 와 Eu^(3+)의 중심파장은 각각 420 nm, 620 nm이었고, Ce^(3+)는 약 380 nm, Tb^(3+)는 약 550 nm이었다. Bi^(3+), Eu^(2+), Ce^(3+)를 첨가한 LiPO₃유리 섬광체에 광전증배관을 결합하여 섬광검출기를 구성하여, Ra-Be 중성자 선원을 이용한 중성자 검출실험을 진행한 결과 Ce^(3+)를 첨가한 LiPO₃ 유리섬광체가 가장 좋은 효율을 보여주었다. LiPO₃ glass scintillators were fabricated, and lanthanides(except Pm) oxides or chlorides were used as an activator. For the fabrication of LiPO₃ glasses, optimum heating conditions were obtained, and the photoluminescence of the glasses was measured by the monochromator. For the best transparency of the glass samples, optimum heating temperature and time are 950 ℃ and 90 min, respectively. It was found that Pr, Nd, Gd, Ho, Er, Tm, Yb and Lu do not work as activator, emission spectrums of samples with them were equal to those of samples without activators. In the case of samples with Europium, the peaks of emission spectrum of Eu^(2+) and Eu^(3+) were 420 ㎚ and 620 ㎚ respectively. And samples with Ce^(3+) were about 380 ㎚, and Tb^(3+) were about 550 ㎚. Glass scintillators with Bi^(3+), Eu^(2+), and Ce^(3+) were found to be more applicable to neutron detection. The result of neutron detection by Ra-Be sources showed that Ce^(3+) was found to be the best activator of LiPO₃

      • 복합균혈증의 임상상 및 예후인자에 대한 고찰

        박승철,최철원,김민자,최윤상,강세용,신상원,우흥정,김우주,정희진 대한감염학회 1991 감염 Vol.23 No.3

        During a 7 year period from September 1983 to August 1990, 41 cases had positive blood culture containing more than organism at Korea University Guro hospital. In this retrospective study, 41 cases were examined, and 19 of 41 cases (46%) were nosocomial in origin. The most common combination of organisms were multiple gram-negative bacilli. Frequent source of polymicrobial bacteremia were gastrointestinal tract, respiratory tract, skin and soft-tissue in order of frequency. By univariate analysis, mortality which was 34% overall, correlated with vasopressor therapy, adult respiratory distress syndrome, severlity of underying disease, presence of central lines, systolic blood pressure, respiratory failure, surgical abdomen, and appropriateness of antibiotic selection. Using logistic regression analysis, mortality was predicted by vasopressor therapy and respiratory distress syndrome.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼