http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송지운(Jiwoon Song),박슬기(Sulki Park),김태환(Tae Hwan Kim),조형희(Hyung Hee Cho) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.5
본 연구에서는 후향계단 형상의 0.5 m/s의 속도를 갖는 유동을 DBD 플라즈마를 통해 제어하였다. electrode와 dieletric material로 각각 stainless foil과 polymide film을 사용하였으며, 고압의 AC power source를 사용하였다. 후향계단 전단과 수직 부분의 두 부분으로 나누어 각각 플라즈마를 발생시켰으며, 플라즈마 발생 위치에 따라서 유동의 재부착 지점이 변경됨을 확인 할 수 있었다. The effect of plasma on flow characteristics in subsonic flow in backward-facing step is studied. The velocty of main flows are 0.5 m/s. DBD plasma is using for flow control. Stainless foil and polymide films are used as an electrode and dielectric material. The change of flow characteristics are shown by different of plasma generation region in fluid flow.
초음속 유동장내 2차분사 분사각도 변화에 따른 열전달 특성 변화
송지운(Jiwoon Song),이종주(Jong Ju Yi),조형희(Hyung Hee Cho),배주찬(Ju Chan Bae) 한국추진공학회 2008 한국추진공학회 학술대회논문집 Vol.2008 No.11
초음속 유동장내에 분사된 2차제트 주변에서의 열전달 현상을 고찰 하였다. 초음속 유동장내에 분사되는 2차유동의 Jet to freestream momentum ratio(운동량비)의 변화와, 2차유동 분사각도에 따른 2차 분사홀 주변의 열전달 특성을 파악하기 위하여 홀 주변의 표면온도 변화를 고속 적외선 카메라를 통하여 측정하였으며, 이를 이용하여 비정상 열유속 기법을 바탕으로 열유속을 계산하였다. 운동량비가 증가할 수록 열전달 현상이 강화 되었으며, 15˚ 기울어진 분사보다는 수직 분사의 경우에 더 강한 열전달 현상이 발생되었다. 이를 통해 분사비와 분사 각도가 표면 열전달 분포에 중요한 요인으로 작용함을 확인할 수 있었다. In this paper, heat transfer changes due to the shock/boundary layer interaction were investigated on surfaces where secondary jet are injected. With an infra-red thermography, surface temperature was measured and the measured data was used to obtain the convective heat transfer. Heat transfer is enhanced with increment of momentum ratio. And normal injection case has a higher heat transfer value than that of 15 degrees inclined injection case. Secondary injection momentum ratio and injection angle affect the surface heat transfer distribution.