http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이우상(Woosang Lee),이민우(Minwoo Yi),소준호(Joonho So),김동석(Dong-seok Kim),윤영중(Young Joong Yoon) 한국전자파학회 2016 한국전자파학회논문지 Vol.27 No.5
밀리미터파 대역에서 동작하는 안테나의 성능 측정을 위한 컴팩트 레인지 설계 및 실험 결과에 대해 소개한다. 전기적 거대 구조인 컴팩트 레인지의 포물면 반사판에 의해 형성되는 측정영역의 평면파를 해석하기 위하여 물리광학 기법을 적용하였다. 제작한 밀리미터파 컴팩트 레인지는 측정영역 전계 분포 실험과 고이득 안테나 측정을 통해 성능을 검증하였다. 동작 주파수 75~110 GHz에서 측정영역 직경 50 cm를 갖도록 설계한 컴팩트 레인지의 전력 균일성은 0.75 dB 이하로 측정되었다. We introduce the design technique and test results of a millimeter-wave compact antenna test range. Physical optics is employed for the analysis of the plane wave collimated by an electrical large parabolic reflector of the compact range in the test zone. The performance of the manufactured compact range is verified with the field probing test on the quiet zone and the measurement of high gain antenna. A millimeter-wave compact range designed in the frequency range of 75~110 GHz with a diameter of the test zone of 50 cm shows the magnitude variation of less than 0.75 dB.
이종건(Jong-Gun Lee),변진규(Jinkyu Byun),소준호(Joonho So),천창율(Chang-yul Cheon),강성원(Sungwon Gang),정용식(Young-Seek Chung) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.10
전파의 이용분야의 증가와 사용되는 파워의 증가 따라 전자파에 의한 전류영향을 정밀도 있게 측정하는 방법들이 필요로 하게 되었다. 본 논문에서는 고주파 대역에서 도체 구에 유기되는 표면 전류량을 측정하여 이론치와 비교 하였다.
이동준(Dong-Joon Lee),권재용(Jae-Yong Kwon),소준호(Joonho So),강노원(No-Weon Kang) 한국전자파학회 2012 한국전자파학회논문지 Vol.23 No.8
본 논문에서는 샘플링 오실로스코프를 이용한 시간 영역의 해석을 통해 초고주파 소자 및 안테나의 반사 계수를 평가하는 방법을 소개한다. 20 ㎓ 급의 펄스 입력 신호에 대한 반사 신호를 측정한 후, 이를 푸리에 변환하여 반사 계수를 추출하였다. 초고주파 반사파 회로망의 보정에 필요한 3가지 오차 계수들은 3.5 ㎜ calibration kit을 이용하여 유도하였다. 또한, 반사파 측정을 위하여 결합기를 사용한 경우의 오차 계수를 유도하고, 이를 적용하여 얻은 반사 계수와 벡터 회로망 분석기로 측정한 결과를 비교하였다. This paper presents a method to measure reflection coefficients of microwave devices or antennas based on time domain analysis with sampling oscilloscopes. The reflection coefficients were extracted by the Fourier transformation of echo pulses from devices with respect to the 20 ㎓ incident pulse signals. The three-error terms, which are commonly used for the correction of a microwave network, were determined using a 3.5 ㎜ calibration kit. In addition, a modified error-correction model associated with a directional coupler for reflection coefficient measurements is introduced. The results were compared with those of measured with a commercial vector network analyzer.
이민우(Minwoo Yi),양종원(Jongwon Yang),이우상(Woosang Lee),장원(Won Jang),소준호(Joonho So) 한국전자파학회 2016 한국전자파학회논문지 Vol.27 No.4
밀리미터파 대역인 W-대역에서 초고이득 반사배열안테나를 구현하기 위하여 이중 반사판형태 중 주 반사판으로 향하는 전파가 급전부로 되돌아오지 않도록 하여 안테나의 효율 및 이득 특성을 크게 개선한 축이동 그레고리안 안테나를 금속 반사배열안테나 형태로 구현하였다. 금속 반사배열안테나의 경우, 유전체를 이용한 반사배열의 안테나와 달리 기판에 의한 손실이 없으며, 금속가공만으로 제작될 수 있는 제작의 편의성을 갖고 있다. 본 논문에서는 사각형 금속 개구의 배열을 이용하여 50 ㏈i 이상의 초고이득 축이동 금속 반사배열안테나를 설계하고, 일반적인 기계 가공을 이용하여 안테나를 제작하였으며, 제작된 안테나는 밀리미터파 컴팩트 레인지 안테나 측정시스템을 이용하여 검증하였다. We design a displaced-axis Gregorian dual antenna in the form of a metal reflectarray antenna for millimeter wave region, W-band. Unlike a reflectarray composed of printed patch antennas on a dielectric substrate, metallic rectangular waveguide unit-cells are proposed to avoid the loss of substrate and take an advantage of ease of typical metal machining fabrication. In this paper, the radiation characteristics of constructed metal reflectarray antennas show ultra high-gain antenna over 50 ㏈i at a target frequency in W-band. The experimental measurements are conducted in millimeter-wave compact range antenna measurement system.