http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
성지영,민경원,Seong, Ji-Young,Min, Kyung-Won 한국전산구조공학회 2010 한국전산구조공학회논문집 Vol.23 No.2
건물에 설치된 마찰감쇠기는 외력의 크기에 따라 정지와 운동의 상태를 반복하여 외부 입력에너지를 소산시키기 때문에 외력과 응답관계가 비선형이다. 마찰감쇠기가 설치된 단자유도 건물은 마찰감쇠기외에 점성감쇠가 동시에 존재하므로 해석적인 정해를 구하기가 어렵다. 본 연구에서는 첫째, 점성과 마찰감쇠가 있는 단자유도계 건물의 자유진동 정해를 통하여 변위응답과 가속도 응답특성을 분석하였다. 둘째, 자유진동의 경우 응답이 멈출 때까지 소산에너지식을 이용하여 등가점성감쇠비를 구하였다. 셋째, 조화가진 일 때는 수치해석을 통하여 마찰력비 $F_r$에 따른 응답 특성을 알아보았다. 넷째, 조화가진의 경우 에너지 균형식을 바탕으로 등가점성감쇠비를 유도하였다. 등가점성감쇠비는 변위응답비의 영향을 받으므로 응답을 알아야만 구할 수 있다. 건물 응답의 진동수 특성은 협소영역(narrow band)이므로 고유진동수에 의해 지배된다고 가정하여 등가점성감쇠비를 구하였다. 마지막으로, 유도한 자유진동과 조화가진의 등가점성감쇠비를 이용한 등가선형운동방정식의 해를 비선형 수치해석 한 결과와 비교하여 검증하였다. A friction damper installed at a building shows nonlinear behavior since its stick and slip states are occurred repeatedly depending on the amplitude of external loadings to dissipate input energy. Friction damping is existed for the building with a friction damper. In additionally viscous one is inherently included. Therefore, the building installed in such combined damping is quite involved to find the analytical solution. In this study, first, displacement and acceleration characteristics are identified based on the exact solution for a single-degree-freedom building with a friction damper having both friction and viscous damping. Second, in free vibration, the equivalent viscous damping ratio is obtained by the energy dissipation. Third, numerical analysis is carried out to find response configuration with various friction force ratios. Fourth, corresponding equivalent viscous damping ratio is derived with the finding that the response reaches into steady-state for both friction and viscous damped structure. It is deduced using balance of input external energy and output dissipation energy for steady-state response. Finally, the equivalent viscous damping ratios of free or harmonic vibration are verified through nonlinear analysis.
MR제어기의 마찰력비에 따른 단자유도 구조물의 응답감소
성지영,민경원,Seong, Ji-Young,Min, Kyung-Won 한국전산구조공학회 2010 한국전산구조공학회논문집 Vol.23 No.4
본 연구에서는 MR(Magneto-Reological)제어기가 설치된 단자유도 구조물의 응답을 예측하기 위하여 구조물의 운동방정식을 해석적으로 분석하고 주요변수를 파악하였다. MR제어기의 수치 모델로는 마찰 및 점성감쇠로 단순모델한 Bingham모델을 사용하였다. 자유진동과 조화진동일때의 응답감쇠를 결정짓는 주요변수가 각각 마찰력과 최대정적복원력의 비 $R_f$, 마찰력과 최대조화가진력의 비 $R_h$ 임을 파악하였다. 비선형 미분방정식을 등가의 선형 미분방정식으로 변환하기 위하여 마찰력에 의한 에너지 소산을 등가의 점성에너지로 치환하여 등가점성감쇠와 등가점성감쇠비를 유도하였다. 마지막으로 등가선형화과정을 검증하기 위하여 실제 지진에 대한 구조물의 응답을 비선형 미분방정식의 해와 비교하였다. This study presents key parameters for the structure installed with MR controller in reducing its responses. MR controller is regarded as Bingham model of which control forces are frictional and viscous ones. The parameters are identified as friction force ratios, $R_f$ and $R_h$ which are, respectively, ratio of MR controller friction force to static restoring force for free vibration and ratio of the friction force to amplitude of harmonic force. Structure-MR controller system shows nonlinear response behavior due to friction force. Energy balance strategy is adopted to transform the behavior to linear one with equivalent damping ratio. Finally, proposed equivalent linear process is compared to the nonlinear one, which turns out to give acceptably good results.
MR제어기의 마찰력비에 따른 단자유도 구조물의 응답감소
성지영,민경원,Seong, Ji-Young,Min, Kyung-Won 한국전산구조공학회 2010 전산구조공학 Vol.23 No.4
본 연구에서는 MR(Magneto-Reological)제어기가 설치된 단자유도 구조물의 응답을 예측하기 위하여 구조물의 운동방정식을 해석적으로 분석하고 주요변수를 파악하였다. MR제어기의 수치 모델로는 마찰 및 점성감쇠로 단순모델한 Bingham모델을 사용하였다. 자유진동과 조화진동일때의 응답감쇠를 결정짓는 주요변수가 각각 마찰력과 최대정적복원력의 비 $R_f$, 마찰력과 최대조화가진력의 비 $R_h$ 임을 파악하였다. 비선형 미분방정식을 등가의 선형 미분방정식으로 변환하기 위하여 마찰력에 의한 에너지 소산을 등가의 점성에너지로 치환하여 등가점성감쇠와 등가점성감쇠비를 유도하였다. 마지막으로 등가선형화과정을 검증하기 위하여 실제 지진에 대한 구조물의 응답을 비선형 미분방정식의 해와 비교하였다. This study presents key parameters for the structure installed with MR controller in reducing its responses. MR controller is regarded as Bingham model of which control forces are frictional and viscous ones. The parameters are identified as friction force ratios, $R_f$ and $R_h$ which are, respectively, ratio of MR controller friction force to static restoring force for free vibration and ratio of the friction force to amplitude of harmonic force. Structure-MR controller system shows nonlinear response behavior due to friction force. Energy balance strategy is adopted to transform the behavior to linear one with equivalent damping ratio. Finally, proposed equivalent linear process is compared to the nonlinear one, which turns out to give acceptably good results.
성지영,민경원,Seong, Ji-Young,Min, Kyung-Won 한국전산구조공학회 2011 한국전산구조공학회논문집 Vol.24 No.4
In this study, a simplified design procedure for friction dampers of a multi-story structure in order to reduce seismic response is proposed. To get insight for control effect of the structure with friction dampers is difficult, because of a nonlinear characteristic by a friction damper. Since a control force of a friction damper is influenced by coupling velocity between floors, adjoining modes are coupled. Thus structural response are derived by assuming steady-state response in resonance. As it is impossible that an exact solution is obtained for seismic load, first, a closed form solution can be achieved under harmonic vibration. Second, to convert a three-story building into a single-degree-of-freedom(SDOF) structure, modal analysis is performed. Third, an equivalent damping ratio is derived with utilizing closed form solution. And response reducing factor is proposed by it. Finally, friction force of a damper is designed for using response reducing factor, and then designed dampers are verified for seven seismic data. The nonlinear analysis results confirm the validity of the proposed procedure. 본 논문은 지진응답을 제어하기 위해 다층 건물에 설치된 마찰감쇠기의 간단한 설계절차를 제안하였다. 마찰감쇠기는 비선형성이 강하므로 마찰감쇠기가 설치된 건물의 제어효과를 파악하는 것은 어렵다. 마찰감쇠기의 제어력은 층간속도에 영향을 받으므로, 인접한 모드가 서로 연계된다. 따라서 응답은 공진일 때 안정상태응답으로 가정하여 유도하였다. 첫째로 지진하중에 대한 정해응답을 구하는 것은 불가능하므로 조화가진을 받을 때의 근사해를 유도하였다. 둘째, 다층 건물을 단자유도로 변환하기 위해서 모드해석이 수행되었다. 셋째, 근사해를 이용하여 등가감쇠비를 유도하였다. 그리고 등가감쇠비를 이용하여 응답감소계수를 제안하였다. 마지막으로, 마찰감쇠기의 마찰력을 응답감소계수에 의해 설계하고 설계된 감쇠기를 7개의 지진파를 통해 검증하였다. 비선형해석 결과가 제안된 절차의 유효성을 확인하였다.
갑상선 유두암 환자의 전절제술 후 부갑상선 기능 저하증의 위험 인자
성지영(Ji Young Seong),이초록(Cho Rok Lee),김민지(Min Jhi Kim),김태형(Tae Hyung Kim),이슬기(Seul Gi Lee),최정범(Jung Bum Choi),반은정(Eun Jeong Ban),강상욱(Sang Wook Kang),이잔디(Jan Dee Lee),정종주(Jong Ju Jeong),남기현(Kee Hyun Nam 대한갑상선-내분비외과학회 2016 The Koreran journal of Endocrine Surgery Vol.16 No.3
Purpose: Postoperative hypocalcemia is a common complication of thyroidectomy. This study evaluated the incidence and predisposing risk factors for postoperative permanent hypocalcemia after total thyroidectomy. Methods: There were 1,247 consecutive patients undergoing total thyroidectomy and complete treatment and observation for differentiated thyroid cancer between January 2012 to December 2012 who were enrolled in this study. Patients were divided into two groups, those remaining normalcalcemic (Group I-824 pts) and those who had hypocalcemia requiring treatment (Groups II-423 pts). Group II was subdivided into a transient hypocalcemic group (Group IIA-409 pts) and a permanent hypocalcemic group (Group IIB-14 pts). Results: Female gender, thyroiditis, preserved parathyroid number, lateral lymph node metastasis, RAI treatment, preoperative parathyroid hormone and preoperative vitamin D were significantly associated with the development of postoperative hypocalcemia by multivariate analysis. Comparing patients with transient versus permanent hypocalcemia, tumor size and multiplicity were significantly related to the development of permanent hypocalcemia by multivariate analysis. RAI treatment and parathyroid hormone level on the postoperative third day were significantly related to recovery from transient hypocalcemia to normo-calcemia. Conclusion: Risk factors of postoperative hypocalcemia were associated with preoperative patient factors and advanced thyroid cancer. Advanced thyroid cancer was a risk factor for permanent hypocalcemia. To prevent postoperative hypocalcemia, we should focus on patient condition and need to preserve parathyroid gland more carefully in thyroid surgery.