http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
디시아노비닐기와 카르보닐기를 포함하는 내열성 고분자의 합성과 그들의 열적 성질 비교
설완호,이칠원,공명선 한국공업화학회 2002 한국공업화학회 연구논문 초록집 Vol.2002 No.0
카보닐기와 유사한 특성을 보이는 dicyanovinyl기를 1번과 4번 위치에 치환된 p-bis(1-chloro-2,2-dicyanovinyl)benzene와 terephthaloyl chloride는 alkyl amine과 phenoxide 음이온 등의 친핵체와 유사한 반응성을 가진다. 본 연구에서는 alkyl amine과 phenoxide 음이온을 한 분자 내에 동시에 가지는 tyramine 혹은 tyrosine과 p-bis(1-chloro-2,2-dicyanovinyl)benzene 및 terephthaloyl chloride을계면 중합으로 삼원 공중합체를 합성하였다. p-bis(1-chloro-2,2-dicyanovinyl)bezene외 terephthaloyl chloride를 소수성 용매인 1,2-dichloroethane에 녹인 용액과 수산화나트륨과 상전이 촉매 그리고 tyramine 등을 증류수에 녹인 용액을 blender에 넣고 고속으로 회전시켜 중합을 시도하였다. 합성된 중합체는 재침전 등의 방법으로 미반응물을 제거한 후 50℃에서 24시간 진공건조하여 다양한 비율을 가지는 삼원 공중합체를 얻었다. P-bis(1-chloro-2,2-dicyanovinyl)benzene와 terephthaloyl chloride는 각각 3:1, 2:1, 1:1, 1:2 그리고 1:3의 비율로 중합하였다. 중합체는 <sub>1</sub>H-NMR과 FT-IR을 통하여 구조와 각성분의 비율등을 확인하였으며 분자량 및 점도등의 물성을 측정하였다. 또한 DSC, TGA등을 이용하여 열적 특성을 조사하였다. Homepage - http://home.dankook.ac.kr/chemistry
New Separators Based on Non-Polyolefin for Secondary Lithium Batteries
박정기,설완호,이용민,이준영,한영달,류명현 한국전기화학회 2007 한국전기화학회지 Vol.10 No.2
New porous separators based on non-polyolefin materials including the blend of poly (vinyl chloride)co-HFP)/poly(methyl methacrylate) (PMA), and theporous separator based on poly (vinylidene fluoride) (PVdF) were prepared by phase inversion method. The porosityand morphology were controlled with phase inversion rate, which is governed by the relative content of non-solventand solvent in coagulation bath. To enhance tensile strength, the solvent pre-evaporation and uni-axial stretching pro-cesses were applied. The ionic conductivity was increased with increasing stretching ratio, and tensile strength wasincreased with increasing solvent pre-evaporation time and 56 MPa of tensile strength, and the ionic conductivity of the stretched PVdF separator was 8.6
박정기,이제안,설완호,이용민 한국전기화학회 2006 한국전기화학회지 Vol.9 No.1
A new porous separator based on poly(vinyl chloride) (PVC) / poly(vinylidene fluoride-co-hexafluoropropylene) (P(VdF-co-HFP) / poly(methyl methacrylate) (PMMA) was prepared by a phase inversion method. To enhance mechanical property, the membrane was stretched uniaxially at high temperature. Tensile strength and ionic conductivity were measured for various draw ratios. The tensile strength and ionic conductivity were increased with increasing draw ratio. The tensile strength of the separator reached 52MPa after stretching to draw ratio of 5, and the ionic conductivity of the separator was increased from 1.9 10 4 S/cm to 4.6 10 4 S/cm at 25 C. The stretched separator immersed in liquid electrolyte was electrochemically stable up to 4.7V. The cell based on the stretched separator was maintained at about 99% of the initial discharge capacity after 10th cycle operation at 0.2C rate.