http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
석창목,김철환,정환목,Suk, Chang-Mok,Kim, Cheol-Hwan,Jung, Hwan-Mok 한국공간구조학회 2011 한국공간구조학회지 Vol.11 No.2
단층 래티스 돔과 같은 스페이스 프레임 구조물은 대공간을 확보하기 위하여 강접합으로 설계함으로써 경제성과 심미성 등의 장점을 확보할 수 있다. 그러나 실제 구조물의 접합상태는 완전한 강접합도, 완전한 핀접합도 아닌 접합부 상세에 따라 중간적인 특성을 나타내는 반강접합이 일반적이다. 본 연구에서는 저자 등에 의해 제안된 Step-Up Erection 공법을 적용하여 단층 라멜라 돔의 접합부 강성에 따른 시공 중의 좌굴 특성을 해석적으로 규명하였다. 얻어진 결과는 시공 Step이 증가할수록 그리고 접합부 휨강성이 핀접합에 가까울수록 좌굴내력은 감소하였으며, 좌굴모드는 시공 Step이 증가할수록, 접합부 휨강성이 강접합에 가까울수록 돔의 정점 부근에서 뜀좌굴 현상에 의한 절점좌굴이 발생하였다. 또한, 시공 Step이 낮을 경우 저면 경계부의 원주방향 부재에서 큰 인장응력 분포를 나타내었으며, 시공 Step이 증가할수록 정점 중앙부에서 큰 압축응력 분포를 보였다. 완성돔을 제외한 시공 중 Step에서는 Step이 증가할수록, 접합부 휨강성이 핀접합에 가까울수록 저면부 경선방향 부재에서 큰 인장응력 분포를 나타내었다. Single-layer latticed domes with rigid-joint have an advantage in the construction cost and the aesthetic. But, in single-layer latticed domes, the joints are hard to discriminate between pin-joint and rigid-joint, and consisted of semi-rigid joint in practical. And the erection of large roof structures requires special techniques. As one of these special techniques is the Step-Up erection method. This paper verified buckling characteristics of single-Layer lamella domes according to the Joint flexibility under construction by Step-up method. The results are follows: As erection steps increase, the buckling strength decreases. It is occurred the joint buckling by snap through on the top of dome when the joint flexibility close the rigid. And large tensile stress distribution appeared in circumferential member of bottom boundary when the step of construction is low. As the step of construction increase, large compressive stress distribution showed in the top of dome.
복층 평판형 공간 트러스의 그리드 형태 및 지지상태에 따른 좌굴특성
석창목(Suk Chang-Mok) 대한건축학회 2004 大韓建築學會論文集 : 構造系 Vol.20 No.9
The six preferred double-layer flat grid systems are used in this research, and each model is categorized by the support conditions ①Corner support ② Mid-side support ③ Corner and intermediate edge node support ④ Full edge node support The chosen models are space truss and space frame for analysis To evaluate the efficiency of these models, we must compare for buckling load, buckling mode, displacement and axial force distribution As a result from the analysis looking for the most efficient model, this study suggest DOS(diagonal on square) model by space frame analysis, and SOS(square on square, offset) model and DOD(square on square, set diagonally) model with mid-side support only by space truss analysis.<br/>
김철환,석창목,정환목,Kim, Cheol-Hwan,Suk, Chang-Mok,Jung, Hwan-Mok 한국공간구조학회 2010 한국공간구조학회지 Vol.10 No.4
대공간 구조형식을 갖는 단층 래티스 돔은 역학성, 가능성, 심미성 등을 갖는 구조물로서 그 용도가 점점 확대되고 있다. 단층 래티스 돔의 골조 격자 패턴은 무수히 존재하며, 그 대표적인 패턴에는 삼각형, 사각형, 육각형, 라멜라형, 리브형 등이 있다. 대공간 구조물의 경우, 일반구조물과 달리 재래적인 공법으로 지붕 골조를 시공할 경우 많은 가설재가 소요됨으로 시공비 증가가 예상된다. 따라서 대공간 구조물의 지붕 골조 설치는 특수 Erection 공법에 의하는 것이 일반적이며, 그 중 지상에서 지붕골조를 설치 후 jack-up 서포트에 의해 골조를 인양하는 Step-Up 공법을 적용할 경우 공기와 공비의 대폭적인 절감이 예상된다. 따라서 본 논문의 목적은 Step-Up 공법에 의해 단층라멜라 돔의 지붕골조를 시공할 경우, 인양 중 가설 서포트 개수와 위치에 따른 좌굴특성을 검토하는 것이다. 연구 결과 서포트 개수 및 위치에 따른 단층라멜라 돔의 다양한 좌굴 특성에 관한 실무자를 위한 기초적인 자료를 얻을 수 있었다. Single layer latticed domes which have a mechanics property, a functional property, a aesthetic property and so on, occupies one part of long span space structures and after this, the using parts will be extended. The frame network pattern of single-layer latticed domes can be infinitely taken into account. The typical network patterns are triangular, square, hexagon, lamella and rib etc. It would take long time and cost too much to erect large roof structures with traditional erection techniques due to require of large number of temporary bracing and supports. The erection of large roof structures requires special techniques. As one of these special techniques is the Step-Up election method that utilizes jack-up supports and this will extremely saves time and cost to erect large roof structures. The objective of this study is to analysis the buckling characteristics of single-layer lamella domes according to the support number and position. From the result of this study, we obtained the fundamental data for the structural engineers who design the temporary support of large roof structures.
정적변위센서와 무선주파수를 이용한 기능성 건축부재에 관한 연구
김동현,석창목,김태곤,Kim, Dong-Hyun,Suk, Chang-Mok,Kim, Tae-Gon 한국공간구조학회 2012 한국공간구조학회지 Vol.12 No.3
In this study, static displacement sensors using lead switches are bonded on concrete beams and RC beams, and monitoring systems to crack damages are studied using radio frequency. If load is received on the center of flexible specimens, bonded static displacement sensors will be destroyed, and these become to send signals of damages at radio frequency system connected with static displacement sensors. Study of these functional building elements will be protected from external factors by unusual weather, earthquake, etc, in RC buildings and structures. 본 연구에서 리드스위치를 이용한 정적변위센서를 무근과 철근 콘크리트 보에 부착하고 균열손상의 모니터링을 위해 무선주파수를 이용하였다. 무근 콘크리트 보와 철근 콘크리트 보에 외력이 작용하면 균열손상이 발생하고 균열의 증진으로 정적변위센서가 파괴되면 이와 연결되어 있는 무선주파수 발신자가 손상신호를 외부로 발신하게 된다. 이러한 기능성 건축부재에 대한 연구는 이상 기후 현상과 지진 등으로부터 건축물이나 주요구조물을 보호하는데 중요한 역할을 담당할 것으로 사료된다.
리드스위치 센서와 무선주파수를 이용한 막재료의 손상 모니터링에 관한 연구
김동현,김태곤,석창목,Kim, Dong-Hyun,Kim, Tae-Gon,Suk, Chang-Mok 한국공간구조학회 2013 한국공간구조학회지 Vol.13 No.4
PTEF membranes are used for roofing materials of membrane structures. PTEF is the abbreviation of Poly-tetra Fluotide-ethylene. These materials are consisted of fiberglass weave and polyetrfluoroethylene coating. Also, PTEF membranes have some problems of structural capacity by wind or snow load, etc. In this study, sensor housings using lead switches are bonding in PTFE membranes, Monitoring to changes tension and tear damages are studied using radio frequency. If tension is received on edged membranes, bonded lead switches of sensor housings will be destroyed by changes tension, and these become to send signals of damages at the connected radio frequency system with increased tension. Study of these functional membrane materials will be contributed to prevent water leakage and long-term maintenance of membrane structures.
방재 성능 비교 시스템 구축을 위한 화재관련 법규의 건축 용도별 분류
신호섭(Shin, Ho-Sub),석창목(Suk, Chang-Mok),차정숙(Cha, Chung-Sook),한주형(Han, Ju-Hyung),김용연(Kim, Young-Yeon) 한국화재소방학회 2008 한국화재소방학회 학술대회 논문집 Vol.2008 No.춘계
Korean city had been rapid developed through high industrialization and rapid economic growth after the 1970's. The city development process was guaranteed the fulfillment of city function through the city expansion based on New Towns and satellite cities rather than the reformation of existing city. This city expansion caused by degrading of city, being backward and producing many problems. To solve this problems, it was considered the rehabilitation of retarded function with rejuvenation such as a special law accelerating urban renaissance and reorganization project. Also a fire protection performance did not satisfied the required conditions of modern FPP system, such as the function deterioration of building facilities, the technological development with FPP facilities, changed fire laws and building occupancy for social needs. Insufficiency of requirements depreciated the building value and intimidated a safety of residents. To solve this problem, the improvement of FPP was essentially required and also strongly recommended an analysis and a comparative study between the required FPP of existing building and it improving effective FPP. Therefore, purpose of this study is that establish the basic data to construct a system to analyze and compare the building FPP.
국내 건축물 내진 보강 시스템 구축을 위한 선진각국의 매뉴얼 비교 분석
김용연 ( Kim Young-yeon ),석창목 ( Suk Chang-mok ),차정숙 ( Cha Jeong-suk ),한주형 ( Han Ju-hyung ),신호섭 ( Shin Ho-sub ) 한국구조물진단유지관리공학회 2008 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.12 No.1
The purpose of this research is that presents the basic information for constructing the seismic retrofitting system in korea after analyzing the related manuals of the existing low rise buildings of the United States and Japan. The method of the study is to introducing and analyzing the seismic retrofitting manuals in the United States and Japan. Finally, some analyses are drawn to supply the valuable data for the related manuals in Korea in conclusion.