http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
아치구조와 기둥간의 고유진동수비에 따른 아치구조물의 동적응답특성
석근영,강주원,Seok, Keun-Young,Kang, Joo-Won 한국공간구조학회 2013 한국공간구조학회지 Vol.13 No.3
Long span arch structure is composed of arch as relatively flexible structure and column as relatively rigid structure. In this study, the characteristic of dynamic response is analyzed according to the natural frequency ratio between arch and columns. The result of analysis for arch as relatively vertical vibration mode is dominant, the influence of columns mainly appears at relatively high frequency band according to increase of 1st mode frequency in column. However, the dynamic characteristic of arch structure is expected to vary with not only frequency ratio but interaction between vibration modes of arch and columns.
아치구조물의 형상비와 하부구조에 따른 지진응답특성에 관한 연구
석근영,강주원,Seok, Keun-Young,Kang, Joo-Won 한국공간구조학회 2012 한국공간구조학회지 Vol.12 No.3
공간구조물은 높이-경간비 또는 개각과 같은 아치의 형상비에 따라 상이한 동적거동특성을 나타내며, 이러한 공간구조물은 지진의 영향을 직접적으로 받는 하부구조의 강성 및 그 접합부에 따라 상이한 지진응답특성을 나타낸다. 따라서 본 연구에서는 수직진동모드와 수평진동모드의 영향이 다른 단층아치구조에 하부기둥의 강성과 접합부에 따른 지진응답특성을 분석하고자 한다. 하부기둥의 영향으로 단층아치구조는 수직방향 응답이 더 많은 영향을 받으며, 기둥의 접합부 회전강성에 있어서는 활절을 제외하고는 큰 영향이 없는 것으로 나타난다. The dynamic behavior of spatial structures is different depending on the aspect ration of arch structure, as the rise-span ratio or open-angle, and these spatial structures show differently the character of seismic response in accordance with stiffness and connection of the lower support structures that are directly influenced by earthquake. Therefore, in this paper, dynamic analysis is conducted for seismic response of single layer arch structures by the influence of column's stiffness and connection, to reflect the different vertical and horizontal vibration mode of single layer arch structures. The vertical response of single layer arch structures is more influence by lower columns and the influence of column's connection rotational stiffness is not large, except to the hinged connections.
수상 안전을 위한 Finger Printing 기반 무선 위치추적 기술
석근영,류종열,이정훈,Seok, Keun Young,Ryu, Jong Yeol,Lee, Jung Hoon 한국정보통신학회 2018 한국정보통신학회논문지 Vol.22 No.7
In this paper, we propose an efficient location tracking scheme using wireless signals for various situations in marine environment that requires location information for many reasons such as lifesaving, accident prevention, and facility management. Our proposed location tracking scheme not only monitors user's location, but also minimizes the risk under the user's limited battery power budget. The position of a user can be obtained at base stations from the strengths of the received signals from the user. In this case, it may require to prevent the user from getting out of the predetermined safe area. For each location in the safe area, we define a risk function, which is influenced by many factors such as location accuracy, depth, flow rate, and geometry. Our proposed scheme is based on finger printing technique and aims at minimizing the average risk of each user in the safe area. 본 논문은 인명구조, 사고방지, 시설관리 등 수상환경에서 위치정보가 필요한 상황에서 무선 신호를 활용한 효율적인 위치 추적 기술을 제안한다. 제안하는 기법은 유저의 배터리 파워 소모량을 고려하여 제한된 전력 내에서 위험도를 최소화한다. 수상의 일정 반경 내에서 유저의 송수신 신호 세기를 이용하여 유저의 위치를 알 수 있는데, 이 때 유저가 일정 반경을 벗어나는 것을 사전에 방지할 필요가 있다. 이 논문에서는 먼저 유저가 일정 반경을 벗어나는 것을 방지하기 위해 위험도 함수를 정의한다. 위험도 함수는 위치정확도, 수심, 유속 등 수상 환경 위험에 관련된 다양한 요인들을 고려한다. 본 논문은 finger printing 기법을 이용한 효율적인 무선 측위 기술을 활용하여 일정 지역 내에 위치한 유저의 평균 위험도를 최소화하는 것을 목표로 하고 있다.
CFT기둥에서 강관과 콘크리트 부착응럭의 해석기법 개선에 관한 연구
석근영,주기수,최준영,채승훈,강주원,Seok, Keun-Yung,Ju, Gi-Su,Choi, Joon-Young,Chae, Seoung-Hun,Kang, Joo-Won 한국공간구조학회 2007 한국공간구조학회지 Vol.7 No.2
건축물의 고층화, 대형화에 따라 기둥이 부담해야할 하중이 증대되고, 이로 인한 기둥단면적의 증대에 효율적으로 대처하기 위해 CFT(콘크리트 충전강관)기둥의 형식을 개발하게 되었다. CFT기둥은 이질재료로 구성된 복합구조형식으로, 역학적 거동을 규명하기 위해 많은 연구가 이루어지고 있다. 본 연구는 원형과 각형의 CFT기둥에 있어서 콘크리트 코어와 강관, 두 이질재료간의 접촉면 부착응력에 대한 해석적 연구로서 비선형 해석프로그램인 ABAQUS/Standard Version 5.8을 이용하여 shear-connector의 부착형태 및 위치에 따른 부착응력을 비교하고, 접촉면의 역학적 특성에 대한 개선된 해석기법을 제시하고자 한다. Buildings become high and large. CFT(Concrete Filled steel Tube) columns have been developed to manage effectively that loads which columns support and cross sections of columns are increased. Because CFT column is the composite structure made of two different materials, many researches have been performed to look into mechanical behaviors. This study is an analytic study about bond stress on interface between concrete core and steel tube in circular and rectangular CFT columns. ABAQUS/Standard Version 5.8 is used to analyze bond stress by bond form and position of shear-connector, and improved analystic method about mechanical characters on interface is suggested.