http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저온 소결성이 우수한 Pb(Zr<sub>0.53</sub>Ti<sub>0.47</sub>)O<sub>3</sub> 계 압전 분말 제조
이용희,백인찬,석상일,Lee, Yonghui,Baek, In Chan,Seok, Sang Il 한국입자에어로졸학회 2008 Particle and Aerosol Research Vol.4 No.1
$Pb(Zr_{0.53}Ti_{0.47})O_3$ (PZT) was synthesized by a multiple wet dry process. Precipitates prepared from reaction between $ZrOCl_2{\cdot}8H_2O$ and $TiOCl_2$ and $NH_4OH$ in an aqueous solution was dried at $100^{\circ}C$, and calcined at $500^{\circ}C$ and $700^{\circ}C$. The mixture mixed with PbO and as-dried or calcined $Zr_{0.53}Ti_{0.47}O_4$ (ZT) powders was calcined again at 700 and $800^{\circ}C$. Well crystallized ZT and PZT were formed at even $700^{\circ}C$. PZT piezoelectric ceramics of more than 98.5% in a relative density was obtained by sintering at as low as $900^{\circ}C$.
경요도 절제술을 시행받는 환자에서 초음파기를 이용한 폐쇄신경 차단 - 서혜부 주름부위 접근법
길현주 ( Hyun Jue Gill ),전덕희 ( Duk Hee Chun ),백인찬 ( In Chan Baek ),장준흠 ( Jun Heum Jang ),신동욱 ( Dong Wook Shin ),강화자 ( Wha Ja Kang ) 경희대학교 경희의료원 2014 慶熙醫學 Vol.29 No.1
연구배경: 경요도절제술을 시행받을 환자 중에서 초음파기와 신경 자극기를 이용하여 폐쇄신경 차단 을 시행하는 것이 환자에게 안전하고 효과적인지 알 아보고자 한다. 방법: 척추 마취하 경요도절제술을 시행 받는 26 명의 환자들에게 초음파기와 신경 자극기를 사용하 여 폐쇄신경 차단을 시행하였다. 초음파로 해부학적 구조를 확인하고 근수축 확인 후 1% lidocaine 10 ml 를 폐쇄신경의 anterior와 posterior branch에 각각 투 여하였다. 초음파기를 이용하여 해부학적 위치감별 에 걸리는 시간, 전체 신경차단에 걸리는 시간, 바늘 깊이, 수술 중 근수축의 정도, 실패율, 합병증등을 평가하였다. 결과: 초음파기를 이용하여 fascial plane을 감별하 는 데 걸리는 시간은 21±14.9초, 폐쇄신경의 anterior branch와 posterior branch를 확인하는 데 걸리는 시간 은 각각 39.6±27.4와 24.3±11.7초였으며 전체 신경차 단에 걸리는 시간은 174±65.1초, 바늘 깊이는 anterior branch가 4.8±0.8 cm, posterior branch가 6.2±1.1 cm였 다. 실패율은 anterior branch가 2/26 (7.7%), posterior branch가 7/26 (26.9%)이었다. Grade 1의 근수축은 22/26 (84.7%)에서 나타났으며 폐쇄신경술의 성공률 은 23/26 (88.5%)이었다. 결론: 서혜부 위치에서 초음파로 신경의 위치를 확인하는 방법은 쉬우나 초음파와 신경 자극기를 사 용한 폐쇄신경 차단술의 성공률은 큰 차이가 없었다.
황규홍,조명제,백인찬 경상대학교 생산기술연구소 2000 生産技術硏究所論文集 Vol.16 No.-
To achieve the good densification of SiC plate at low temperature, the effect and behaviour of V2O5 added for sintering agent was studied. By adding V2O5 powder fairly good wetability between SiC particles improved densification, but V2O5 was removed toward surface after sintering. After sintering, to get a better strength, the effect of clay content was investigated. and about 0.3wt% of clay content was suitable for getting a good strength. Addition of large amount of clay and V2O5 powder was good for getting a high sintering density, but the bending was happened during liquid phase sintering so that to protect bending suitable content of clay and V2O5 powder was studied.