http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Nanoimprinting 방법으로 제작된 나노 기공 TiO₂를 이용한 복합 유기 태양전지의 특성 분석
백운혁(Woon-Hyuk Baek),윤태식(Tae-Sik Yoon),이현호(Hyun Ho Lee),김용상(Yong-Sang Kim) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
TiO₂의 계면적을 넓힘으로써 태양전지의 특성을 향상시키기 위해 정렬도가 높은 나노 기공 (nanopore, NP) 이산화티타늄 (TiO₂) 을 이용하여 복합 태양전지를 제작하였다. Polymethyl methacrylate (PMMA)를 사용한 nanoimprinting lithography (NIL) 기술을 이용하여 NP TiO₂를 제작하였으며. 광활성층으로는 poly(3-hexylthiophene) (P3HT)와 [6,6]-phenyl C61 butyric acid methyl ester (PCBM)을 사용하였다. NP TiO₂를 이용한 태양전지의 전력변환효율이 1.49%로 표면이 고른 소자의 효율인 1.18%에 비해 26% 가량 증가하였다. 이와 같은 효율 향상의 원인은 TiO₂와 광활성층의 계면이 증가되어 전하의 생성과 분리가 용이해졌기 때문인 것으로 사료된다.
스크린 프린팅 방법으로 형성된 은 전극을 이용한 유기물 태양전지의 제작 및 특성 분석
최미정(Mijung Choi),백운혁(Woon-Hyuk Baek),윤태식(Tae-Sik Yoon),이현호(Hyun Ho Lee),김용상(Yong-Sang Kim) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
본 논문에서는 유기 태양전지의 전극을 스크린 프린팅 방법을 이용하여 형성하였으며 전자 주게 물질(electron donor)인 regioregular poly(3-hexylthiophene) (P3HT)와 전자 받게 물질(electron acceptor)인 pheny-C61-butyric acid methyl ester (PCBM)을 혼합한 복합 박막 구조를 이용하여 태양전지를 제작하고 전기적 특성에 대해 분석하였다. 스크린 프린팅 방법을 이용하여 제작한 유기 태양전지의 개방회로 전압(V<SUB>oc</SUB>)은 0.59V, 단락 회로 전류(J<SUB>sc</SUB>)는 8.76mA, Fill factor(FF) 는 0.49, 전력변환효율(η)은 2.60%였다. 이를 통하여 스크린 프린팅 방법을 통한 태양전지 제작의 가능성을 확인하였다.
Hardware-in-the-loop 시뮬레이션을 이용한 차량의 종방향 제어기 설계 및 검증
송봉섭(Bongsob Song),백운혁(Woon-Hyuk Baek),신영호(Young-Ho Shin),송호인(Ho-In Song) 한국자동차공학회 2006 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
In this paper, design and validation procedures for a longitudinal controller via hardware-in-the-loop simulation are presented. As new technologies related with ECU and in-vehicle network have been developed, the corresponding longitudinal controller for velocity control of the vehicle needs to be modified and validated experimentally. Since much development cost and effort during the design and validation process are in general required, a relatively quick and efficient design and validation method via hardware-in-the-loop simulation (HILS) is proposed in the paper. Finally speed controller based on Dynamic Surface Control is designed and its performance results are validated via HILS.