http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김요식(Yo-Sik Kim),배기형(Ki-Hyoung Bae),유병길(Byung-Gil Yu),김민성(Min-Sung Kim),박찬익(Chan-Yik Park) 한국항공우주학회 2013 韓國航空宇宙學會誌 Vol.41 No.10
본 논문에서는 스마트 스킨 기술을 활용한 소형경량 및 광대역 특성을 갖는 항공기용 안테나 내장 스킨 구조(CLAS: Conformal Load bearing Antenna Structure)를 설계하였다. 제안된 CLAS 안테나는 전기적 성능을 만족하기 위해 전도성 매쉬, 외부표피, 복사소자, 내부심재 및 하우징 등으로 구성하였다. 특히, 복사소자의 경우 복합자성유전체와 PCB에 에칭된 방사체로 구성되어 있으며 방사체는 복합자성유전체에 삽입되어 슬롯형 폴디드 대수주기 구조(Folded Log-Periodic)를 갖는다. 제안된 CLAS 안테나는 복합자성유전체에 의해 공진주파수가 낮아지고 임피던스 매칭특성이 향상되었으며 측정 결과, 안테나의 소형경량 및 광대역 특성을 확인하였다. In this paper, a compact and wideband CLAS(Conformal Load bearing Antenna Structure) was studied using smart skin technique. In order to satisfy the electrical performance of the CLAS antenna, the proposed CLAS antenna is composed of conductive mesh, face-sheet, radiator, honeycomb, housing. Especially, radiator is composed of composite magneto-dielectric material and radiating element etched on the PCB (Printed Circuit Board). The radiating element is inserted into the composite magneto-dielectric material and has sloted Folded LP(Log Periodic) structure. By fabricated composite magneto-dielectric, the resonance frequency is decreased and the impedance matching characteristics is improved. We verified that the antenna has wideband characteristics and compact size using the antenna test results.
정치현(Chi-Hyun Cheong),정혜미(Hye-Mi Jeong),김건우(Kun-Woo Kim),배기형(Ki-Hyoung Bae),태현식(Hyun-Sik Tae),엡츄시킨겐나디(Evtyushkin Gennadiy) 한국항공우주학회 2010 韓國航空宇宙學會誌 Vol.38 No.12
본 논문에서 소개하는 위성 통신 안테나는 대용량 데이터 전송을 위한 위성 송수신 시스템에 응용되어 추가적인 급전부 교체나 다른 기구 형상 변경 없이 X, Ku와 Ka 3중 대역의 전파 신호를 통시에 송수신할 수 있다. 설계된 안테나는 오프셋 파라볼라 안테나 형태로 2중 대역(X/Ka 대역) 급전혼, 단일대역(Ku 대역) 급전혼, 주파수 선택막(FSS : frequency selective surface) 특성을 갖는 부반사판 및 파라볼라 주반사판으로 구성되어 있다. 주반사판의 초점에는 2중 대역 급전혼이 위치하며, FSS 부반사판으로 이미지 초점을 만들어 단일 대역 급전혼이 설치되어 운용된다. 본 안테나는 전기적 특성이 국내 위성 환경에 부합되도록 3차원 EM 시뮬레이터를 이용하여 설계하였고, 측정결과 X/Ku/Ka 대역에서 안테나 이득이 각각 31.6 dBi, 36.8 dBi, 40.8 dBi 이상, 교차편파는 각각 21.7 ㏈, 26.6 ㏈, 그리고 25.2 ㏈ 이상의 특성으로 목표 성능을 만족함을 확인하였다. The design is presented for a SATCOM antenna capable of simultaneous multi-band (X/Ku/Ka-Band) communications without replacement of feed horns or change of other parts in the application as a ground satellite terminal for large data transfer. The antenna is the offset configuration and consists of a dual-band(X/Ka-band) feed horn, a single-band(Ku-band) feed horn, a frequency selective surface(FSS) sub-reflector and a parabolic main-reflector. The antenna has a main reflector defining a prime focus and a frequency selective surface sub-reflector defining an image focus. A dual-band feed and a single-band feed are provided at each of the prime focus and image focus. The antenna is designed using 3D EM simulator and the gains measured in X/KulKa-band of the complete antenna assembly is more than 31.6dBi, 36.8dBi, 40.8dBi, and the cross polarization is 2l.7㏈, 26.6㏈, 25.2㏈, respectively.