http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폴리머 기판에 스퍼터법으로 경사 증착한 Cr박막의 특성
배광진,최인균,정은욱,김동용,이태용,조영래,Bae, Kwang-Jin,Choi, In-Kyun,Jeong, Eun-Wook,Kim, Dong-Yong,Lee, Tae-Yong,Cho, Young-Rae 한국재료학회 2015 한국재료학회지 Vol.25 No.1
Glancing angle deposition (GLAD) is a powerful technique to control the morphology and microstructure of thin film prepared by physical vapor deposition. Chromium (Cr) thin films were deposited on a polymer substrate by a sputtering technique using GLAD. The change in thickness and Vickers microhardness for the samples was observed with a change in the glancing angle. The adhesion properties of the critical load (Lc) by a scratch tester for the samples were also measured with varying the glancing angle. The critical load, thickness and Vickers microhardness for the samples decreased with an increase in the glancing angle. However, the thickness of the Cr thin film prepared at a $90^{\circ}$ glancing angle showed a relatively large value of 50 % compared to that of the sample prepared at $0^{\circ}$. The results of X-ray diffraction and scanning electron microscopy demonstrated that the effect of GLAD on the microstructure of samples prepared by sputter technique was not as remarkable as the samples prepared by evaporation technique. The relatively small change in thickness and microstructure of the Cr thin film is due to the superior step-coverage properties of the sputter technique.
디바이스 인증 및 인가에 기반한 유비쿼터스 홈네트워크 프라이버시 대책
이선영(Sun-Young Lee),임강빈(Kangbin Yim),배광진(Kwang-jin Bae),정태영(Taeyoung Jeong),한종욱(Jong-Wook Han) 한국정보보호학회 2008 情報保護學會誌 Vol.18 No.5
유비쿼터스 홈네트워크에서는 다양한 디바이스를 이용하여 복수의 도메인을 오가며 서비스를 제공하거나 제공받을 수 있을 것으로 기대되는데 이때 디바이스는 반드시 정당한 디바이스여야 하며 이를 실현하기 위하여 인증서를 사용하는 디바이스 인증 기술이 제안되었다. 그리고, 계산 능력이 작은 디바이스를 인증하기 위한 방법으로서 대칭키 암호 기술에 기반을 둔 디바이스 인가 방법을 함께 사용함으로써 계산 능력이 다른 다양한 디바이스들을 인증하는 방법이 제안되었다. 이들 방법의 공통성은 사용자의 개인 정보 유출을 피하기 위하여 사용자 정보를 사용하지 않고 디바이스 고유의 정보만을 사용하여 인증한다는데 있다. 이러한 디바이스 인증/인가 방법을 홈네트워크에 사용하였을 경우 사용자의 개인 정보는 보호되는지 확인할 필요가 있다. 본 논문에서는 기존에 제안된 유비쿼터스 홈네트워크를 위한 디바이스 인증/인가 기술을 분석하여 개인 정보의 유출에 관한 문제점을 도출하고 그에 대한 대응 방법을 제안하였다.
상압 플라즈마 표면처리가 기판과 코팅층 사이에 생기는 중간층과 부착특성에 미치는 영향
김동용 ( Dong Yong Kim ),박홍석 ( Hong Seok Park ),배광진 ( Kwang Jin Bae ),김종구 ( Jong Gu Kim ),조영래 ( Young Rae Cho ) 대한금속재료학회(구 대한금속학회) 2015 대한금속·재료학회지 Vol.53 No.12
The effect of atmospheric plasma treatment on change in the interlayer and the adhesion strength between the substrate and the coating layer was investigated. Soda-lime glass and indium-tin oxide (ITO) coated glass plates were used as the substrate, and the surface energy was calculated from the wetting angle of liquids on the substrates. To study the effect of surface treatment on the adhesion strength between the substrate and the coating layer, chrome (Cr) thin film was deposited on the surface treated substrates by sputtering. For the analysis of the interlayer, auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) were used. The surface energy of the substrates increased as a function of exposure time for atmospheric plasma surface treatment. When the exposure time exceeded 20 sec, the surface energy increased to a saturated value of 76 mJ/m2. The adhesion strength between the substrate and Cr coating layer according to the surface treatment showed a similar trend of the surface energy. The atmospheric plasma surface treatment using argon and oxygen gases promoted the formation of an interlayer that was identified as chrome oxide (Cr2O3). The thicker chrome-oxide interlayer contributed to the increase in adhesion strength between the substrates and the Cr coating layer.