http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
NLF를 이용한 광대역 PCS용 CE-OQPSK의 설계 및 제작
방성일,장홍주,Bang, Sung-Il,Jang, Hong-Ju 한국전기전자학회 1997 전기전자학회논문지 Vol.1 No.1
본 논문에서는 PSK 를 비선형증폭기에 적용하여 전력효율을 개선하고자 등포락선을 갖는 CE-OQPSK 를 설계하였다. 이의 실현을 위해서 비교적 전력소모가 적은 ROM 과 D/A 변환기를 사용하였다. CE-OQPSK의 전력스팩트럼밀도를 기존의 OQPSK 와 비교한 결과 등포락선을 만들기 위한 계수 ${\alpha}$ =0.707 인 경우 주로브와 부로브에서 각각 최대 5% 와 20%의 대역효율의 개선을 보였으며 여기에 대역제한 필터를 부가하였을 경우 설계기준으로 설정한 FCC 무선 LAN 규격을 만족함을 보였다. In this paper, the CE-OQPSK that has constant envelope was designed for applying PSK to the nonlinear amplifier so as to improve power efficiency. For this realization. ROM and D/A converter that have relative low power consumption were used. As a result of comparing the PSD (Power spectrum density) of CE-OQPSK with that of conventional OQPSK through simulation for estimating the performance. In case of correlation factor ${\alpha}$ = 0.707. the improvement of bandwidth efficiency of 5% and 20% is achieved in the main lobe and the sidelobe, respectively. And, in case additional bandwidth-limiting-filter is added, it can be shown that the PSD of CE-OQPSK meet the FCC wireless LAN spectrum specification.
터널화 술식을 이용한 치근 이개부 병변의 치료: 증례보고
방경일 ( Kyung Il Bang ),이준우 ( Jun Woo Lee ),이창규 ( Chang Kyu Lee ),유상준 ( Sang Jun Yoo ),김병옥 ( Byung Ock Kim ) 조선대학교 구강생물학연구소 2011 Oral Biology Research (Oral Biol Res) Vol.35 No.2
Furcation area has complex anatomy and the furcation involvement of periodontitis impedes accessibility for professional root debridement. Many treatment options can be taken and among them, the tunnel preparation exposes the furcation area surgically and eases cleansing. This study described 3 cases treated by tunnel preparation. Before the treatment, mobility, probing depth and clinical attachment level of the tooth were evaluated and thorough tooth brushing instruction was performed at each visit. After treatment, each patient was followed up by suppotive periodontal treatment. By thorough tooth brushing instruction and supportive periodontal treatment, the treated area were well maintained for each follow-up period. Reduction on mobility, probing depth and clinical attachment level of the teeth were observed. Also improved gingival index and plaque index could be obtained. And no further alveolar bone loss could be identified with radiographic examination. These results provide us with good prognosis of furcation-involved teeth treated with both tunnel preparation and supportive periodontal treatment.
동기식 IMT-2000을 위한 MC-CDMA의 성능 개선
방성일,Bang, Sung-Il 한국전기전자학회 1999 전기전자학회논문지 Vol.3 No.2
본 논문에서는 북미식 차세대 이동통신 방식인 동기식 IMT-2000을 위한 실내 및 실외 전송환경하에서 DS-CDMA 및 MC-CDMA의 오율특성을 컴퓨터 시뮬레이션을 통해 고찰하였다. 즉 RAKE 수신기를 채택한 DS-CDMA 방식과 EGC(equal gain combining), MRC(maximum ratio combining) 및 개선된 MMSEC(minimum mean square error combining) 방식에 대해 단일 및 다중 사용자와 부 반송파의 수에 따른 비트 오율특성을 분석 하였다. 그 결과 MMSEC 방식이 다른 방식에 비해 페이딩 채널에서 오율이 $2{\times}10^{-3}$ 일 때 약 5 [dB], 동기식 IMT-2000을 위한 실내 및 실외 전송채널의 경우에는 약 6[dB] 개선됨을 보였다. 또한 다중 사용자의 수가 증가함에 따라 MMSEC를 적용한 MC-CDMA 방식이 가장 우수함을 확인하였다. In this paper, the DS(direct sequence)-CDMA and MC(multi-carrier)-CDMA, which are being researched recently as a synchronous IMT-2000 scheme for next-generation mobile multimedia communications, are studied in terms of BER(bit error rate) performance. The BER performance of MC-CDMA with EGB, MRC, and improved MMSEC detection scheme are analyzed and compared to that of conventional DS-CDMA adopting RAKE receiver through the computer simulations under the environments of synchronous IMT-2000 transmission channel. Not only single user case but also multiuser case is considered in the given system. As a result, it is shown that MC-CDMA with MMSEC detection outperforms all other schemes improved the $E_b/N_o$ by about 5 [dB] and 6 [dB] when the BER is $2{\times}10^{-3}$, for the indoor/outdoor fading channel and synchronous IMT-2000 transmission channel, respectively. Also in the multiuser case, MC-CDMA with MMSEC detection scheme exhibits better performance than all the other schemes.
온도보상 기법을 적용한 디지털 방식의 사전 왜곡제거기 알고리듬
고영은,방성일,Ko, Young-En,Bang, Sung-Il 대한전자공학회 2005 電子工學會論文誌-TC (Telecommunications) Vol.42 No.9
본 논문에서는 디지털 방식으로 온도에 의한 왜곡을 보상할 수 있는 사전왜곡제거기 알고리듬을 제안하였다. 사전왜곡제거 알고리듬은 입력레벨에 따른 시스템 비선형 왜곡뿐만 아니라 온도에 따른 왜곡의 보상성분을 산출하여 베이스밴드 영역의 디지털 신호를 사전 왜곡함으로써 발생하는 왜곡을 상쇄시키는 알고리듬이다. 이와 같은 알고리듬의 우수성을 증명하기 위해 Saleh의 고출력 증폭기 모델에 적용하여 컴퓨터 모의실험을 한 결과, 기존의 A&P PD 방식보다 P1dB는 약 0.5dBm 증가하였고, 위상천이는 약 $0.8^{o}$ 감소하였으며, 온도보상 기법을 적용한 사전왜곡제거기 로 증폭기의 PldB를 약 2dBm 개선하였고, 위상천이는 약$0.1^{o}$ 이하로 안정시켰다. 또한 이 증폭기에 UMTS 신호 샘플을 인가 시 온도보상 기법을 적용한 사전왜곡 제거기의 IMD3가 온도보상 기법을 적용하지 않은 경우보다 10dBm 감소하였으며, 왜곡제거기가 없는 신호보다 19dBm 감소시킴으로써 우수한 선형성을 보였다. In this paper, we proposed predistortion algerian that can compensate temperature distortion by digital. Predistortion algorithm produces compensation value of distortion by temperature as well as system nonlinear distortion by input level, and warps beforehand signal of baseband. To prove excellency of such algorithm we applied predistortion algorithm to Saleh's high power amplifier model, and did computer simulation. As a result, P1dB increased about 0.5 dBm phase shift reduced about $0.8^{o}$ than existent the A&P PD, and predistiortion algorithm to apply temperature compensation techniques improved P1dB about 2dBm and stabilized phase shift by about $0.1^{o}$ low. When approved UMTS's sample signal to this amplifier, IMD3 of amplifier decreased 10dBm than is no temperature compensation techniques, and reduced 19dBm than signal that is no distortion.
김상기,방성일,Kim, Sang-Ki,Bang, Sung-Il 한국전기전자학회 2003 전기전자학회논문지 Vol.7 No.1
본 논문에서는 미국내의 상용 PCS 서비스 대역인 $1.9GHz(1.93{\sim}1.99GHz)$대역에서 사용 가능한 선형 전력 증폭기를 설계 및 제작하였다. 실제로 제작한 선형 전력 증폭기는 출력이 25W이고 Feedforward선형화 기법을 사용하여 FCC가 규정한 혼변조 왜곡 특성을 만족하도록 하였다. 선형 전력 증폭기의 출력별로 측정한 결과 1W(30dBm)에서 25W(44dBm)까지 14dB의 측정구간에서 선형화에 의한 혼변조 왜곡은 최저 10.51dBc부터 최고 19.01dBc까지 개선되었고, 최종 출력에서의 IMD 레벨은 최저 64.84dBc에서 최고 68.17dBc로 각각 나타났다. 이러한 특성은 PCS 기지국의 상용제품으로 충분히 사용할 수 있을 것으로 기대된다. In this paper, We designed and implemented a linear high-power amplifier which can be used for the commercial service in band of $1.9GHz(1.93{\sim}1.99GHz)$ at U.S.A. The output power of the implemented linear high power amplifier is 25W. In order to satisfy IMD characters decided by FCC, the Feedforward linearization techniques has been used. The used feedforward method has improved the IMD characteristics from 10.51dBc to 19.01dBc in each power level from 1W(30dBm) to 25W(44dBm). The IMD level of the final output shows from minimum 64.84dBc to maximum 68.17dBc. Because this good characteristics of IMD, the LPA is expected to use as a commercial product of PCS base station.