http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
프리스트레싱을 통한 도로용 복층터널 중간슬래브 단면감소 방안
박희범,조영교,이영훈,문수환,김성민 한국도로학회 2016 한국도로학회 학술발표회 논문집 Vol.2016 No.06
해외에서 운용 중인 복층터널 중간슬래브의 경우 핵심 설계・시공 기술은 공개되지 않고 있다. 국내의 경우 도심지 교통정체 및 지상공간의 부족문제 등으로 복층터널의 수요가 증가할 것으로 예상되므로 복층 터널 중간슬래브 설계에 대한 국내 기술을 보유함으로써 복층터널 기술 보유국으로부터의 국내 건설시장 잠식을 방지하고 기술선점 및 세계 일류 원천기술 확보가 시급한 분야라고 할 수 있다. 복층터널의 중간슬래브는 터널 라이닝에 브래킷을 설치하여 그 위에 지지되는 구조이므로 하부층에 전 면 지지되는 콘크리트 도로 포장 슬래브와 교각과 거더에 지지되는 교량 슬래브와는 다른 구조적 형식을 가진다. 따라서 슬래브가 자중에 의해 과다한 응력이 발생하게 되는데 슬래브의 두께를 늘리게 되면 중간 슬래브에 발생하는 응력을 어느 정도 감소시킬 수 있다. 하지만 중간슬래브의 응력에 지배적인 영향이 미 치는 인자는 슬래브의 자중이기 때문에 슬래브의 두께를 늘 리는 것으로 응력을 감소시키는 데에는 한계가 있다. 실제 중간 슬래브의 설계를 위해서는 프리스트레싱과 같은 방법을 통해 응력을 감소시키는 방안이 필요하다. 본 연구에서는 중간슬래브 최적 단면 설계 방안을 도출 해 내기 위하여 프리스트레싱을 통한 복층터널 중간 슬래브의 단면 감소 방안에 대하여 검토하였다. 우선 그림 1과 같이 강선 배치 간격에 따른 주인장 응력을 검토 하였으며, 그림 에서 볼 수 있듯이 강선배치 간격이 1m인 경우 강선이 없는 중간슬래브에 비해 최대 인장응력이 약 16% 감소하였으며, 간격이 0.5m인 경우 강선이 없는 중간 슬래브에 비해 최대 인장응력이 약 31% 감소하는 것을 알 수 있다. 프리스트레싱에 따른 중간슬래브의 슬래브 두께 감소 효과 를 분석하였다. 그림 2에서 볼 수 있듯이 프리 스트레싱이 가 해지지 않은 두께 40cm의 슬래브에서 발생 하는 응력과 프리 스트레싱이 가해진 두께 30cm의 중간 슬래브에서 발생하는 응력이 유사하게 나타난다. 이와 같이 프리 스트레싱을 통해 서 중간슬래브의 두께 조절이 가능 하다는 것을 알 수 있다. 하지만 슬래브의 두께가 과도하게 얇아질 경우에는 차량하중 에 의한 처짐량을 제어할 수 없기 때문에 적정한 두께를 유지 하면서 프리스트레싱을 적용해야 할 것으로 판단된다.
복합소재를 활용한 곡면 패널 실대형 실험체의 구조 성능 평가
박희범,박종섭,강재윤,정우태 한국복합신소재구조학회 2018 복합신소재구조학회논문집 Vol.9 No.2
FRP is a new material that has light, high strength and high durability characteristics and is emerging as a third construction material in and out of countries. However, very few studies have been done on curved FRP construction materials that can be used for tunnels or arched bridges. In particular, many joints are required for the application of curved panels to the open cut tunnel. Experimental data on the performance of the joint is required due to insufficient design criteria. The purpose of this study is to analyze the structural performance of real size, composite materials curved panels. To achieve this goal, curved panels were constructed and bending performance was tested. A numerical analysis was also performed and compared with the results of the test. The results of the test showed that the average load was 757.6 kN and the average displacement of bottom was measured at 53.12 mm. Compression stress on the upper flange and tensile stress on the lower flange were within acceptable limits of 50% of the allowable stress.
박희범,서진관,조한권,정기섭 한국자동차공학회 1994 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
It was required to improve the low frequency vibration characteristics of a current production car. For the sake of design study, a well correlated FE model was necessary. This paper describes the process of how to build FE model and to correlate it with test result from BIW to total vehicle.<br/>
포스트텐션 프리스트레스트 콘크리트 포장의 긴장 후 거동 분석
박희범 慶熙大學校 大學院 2009 高凰論集 Vol.44 No.-
This research was conducted to analyze the behavior of PTCP (Post-Tensioned prestressed Concrete Pavement) after tensioning by performing field tests when the experimental PTCP slab was being constructed. The displacements in the slab under the environmental loading and tensioning were measured using temperature measurement sensors and displacement transducers. The behavior of PTCP after tensioning could be observed by investigating the relationship between temperatures and displacements and daily changes in the displacement. 본 연구는 포스트텐션 프리스트레스트 콘크리트 포장(PTCP: Post-Tensioned prestressed Concrete Pavement) 공법의 국내 적용을 위해 수행한 시험 시공 후에 현장 실험을 통해 PTCP의 긴장 후 구조적 거동을 분석하기 위하여 수행되었다. 실험을 위해 온도측정센서 및 변위측정게이지를 슬래브에 장착하여 환경하중 및 긴장력 도입에 따른 슬래브의 변위 변화를 측정하였다. 긴장 후의 PTCP 거동을 온도와 변위의 상관관계, 종방향 변위 변화량 등을 분석하여 판단하였다.