http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
농촌지역 활성화를 위한 도시공원의 활용 - 구례군 백련제 주변 관광자원화사업을 사례로 -
박지환,오창송,Park, Ji-Hwan,Oh, Chang-Song 한국농촌계획학회 2018 농촌계획 Vol.24 No.3
This study is conducted to propose urban park utilization and master plan in rural areas. Urban parks designed for the rural areas can be divided into three types: a themed type for rural tourism, a community type for hub regenerations and a waterfront type for using agricultural reservoirs. To use the themes and characteristics of ruralness, these types are required a multi-layered spatial structure. And ecological, cultural and economic networks of local tourism resources have to be integrated by utilizing agricultural reservoirs. Therefore, urban parks in rural areas can be defined as a part of the public benefit project aiming to revitalize the local economy. Also, urban parks are necessary to use attractions and amenities in rural areas. Based on theoretical backgrounds, this study proposed two sustainable master plans as the tourism resource development project for Baelyeonje, Gulye-gun. For ecological and cultural sustainability, this study proposed the environment restoration plan which reinforces the scenic resource of Nogodan in Mt. Jiri by developing the underdevelopment plan with consideration of the local landscape characteristics and resources. For economic sustainability, building the Mt. Jiri tourism complex and economic communities are needed to promote investments for securing mutual economic benefits. To achieve the sustainability, further studies related to the social equity and investment of private capital in rural areas are needed.
Hot pressing으로 제조된 Cu-W계 소결재의 미세조직 및 내마모특성
박지환,김수방,박윤우,Park, Ji-Hwan,Kim, Su-Bang,Park, Yun-U 한국재료학회 2000 한국재료학회지 Vol.10 No.3
Cu-20wt.%W 복합재료를 $800^{\circ}C$에서 $1000^{\circ}C$의 소결온도에서 15MPa과 30MPa의 소결압력으로 30분과 60분 동안 유지하여 진공가압소결하였다. 진공가압소결로 제조한 결과 일반적인 소결공정에 비해 높은 밀도와 경도값의 상승 및 내마모성이 향상되었다. 그런데, 15MPa의 소결압력에서 Cu-W의 미세조직은 W이 부분적으로 불균일하게 군집한 것을 관찰할 수 있다. 이러한 결과는 구리와 텅스텐간의 상호 불고용성과 소결시 소결압력의 차이의 의한 효과라 생각된다. Cu-W composites containing 20wt.% W were fabricated by hot pressing. Hot pressing was carried out at temperatures ranging from 800 to $1000^{\circ}C$ under pressures of 15MPa for 30MPa for 30min and 60min. This process gave composites of higher density, higher hardness and higher wear resistance than the conventional sintering processes. However, the microstructure of Cu-W composites under pressure of 15MPa revealed there was an inhomogeneous distribution of W, segregation of W on some area. These undesirable results are attributed to the immiscibility of W in Cu and the pressure effect on sintering.
다중 해상도 영상에서 페이싯 모델을 이용한 초소형 표적 검출
박지환,이민우,이철원,주재흠,남기곤,Park, Ji-Hwan,Lee, Min-Woo,Lee, Chul-Hun,Joo, Jae-Heum,Nam, Ki-Gon 한국융합신호처리학회 2011 융합신호처리학회 논문지 (JISPS) Vol.12 No.2
본 논문은 다중 해상도 영상에서 3차 페이싯 모델을 이용하여 적외선 영상의 원거리에 위치하고 있는 초소형 표적의 위치와 크기를 검출하기 위한 방법을 제안한다. 먼저, 원 영상을 점차 축소하여 여려 단계의 다중 해상도의 영상들로 구성한다. 각 단계에서의 다중 해상도 영상들에 대해 페이싯 모델과 국부 극대 조건을 적용하여 초소형 표적의 위치를 검출한다. 다중 해상도 영상에서 각 페이싯 모델의 국부 극대값을 의미하는 $D_2$값 중 최대 크기를 가지는 위치를 표적의 위치라고 평가한다. 이 경우 각 단계의 다중 해상도 영상들에 대해 크기가 다른 표적의 검출이 가능하게 된다. 본 논문에서 제안한 초소형 표적 검출 방법은 초소형 표적이 있는 다양한 적외선 영상에서 실험하였다. 기존의 페이싯 모델을 이용한 방법에서는 하나의 마스크만 적용시킨 것에 반해 제안된 방법은 하나의 마스크를 다중 해상도 영상에서 적용하였다. 고정된 마스크를 다중 해상도 영상에 적용함으로써 마스크의 크기를 달리하는 효과를 확인하였고 그에 따라 검출하는 표적의 크기도 다름을 확인하였다. 이를 이용해서 표적의 위치뿐만 아니라 크기도 검출할 수 있음을 확인하였다. In this paper, we propose the technique to detect the location and size of the small target in multi-resolution image using cubic facet model. The input image is reduced by the multi-resolution and we obtain the multi-resolution images. We apply the facet model and the local maxima conditions to the multi-resolution images of each level. And then, we detect the location of the small target. We estimate that the location at the maximum of the $D_2$ which means the local maxima value of the facet model in the multi-resolution images is the location of the small target. We can detect the small target of the various size about the multi-resolution images of each level. In this paper, we experimented in the various infrared images with the small target. The method using the typical facet model applies a mask. However, the proposed method applies a mask in the multi-resolution images. We verified to vary the mask size and differ the size of the small target. The proposed algorithm can detect the location and size of the small target.
박지환,이동원,김종렬,Park, Ji-Hwan,Lee, Dong-Won,Kim, Jong-Ryoul 한국분말야금학회 2010 한국분말재료학회지 (KPMI) Vol.17 No.5
Titanium powders have been usually produced by de-hydrogenating treatment in vacuum with titanium hydride ($TiH_2$) powders prepared by milling of hydrogenated sponge titanium, $TiH_x$. The higher stoichiometry of x in $TiH_x$, whose maximum value is 2, is achieved, crushing behavior is easier. $TiH_x$ powder can be, therefore, easy to manufactured leading to obtain higher recovery factor of it. In addition, contamination of the powder can also minimized by the decrease of milling time. In this study, the hydrogenation behavior of sponge titanium was studied to find the maximum stoichiometry. The maximum stoichiometry in hydride formation of sponge titanium could be obtained at $750^{\circ}C$ for 2 hrs leading to the formation of $TiH_{{\sim}1.99}$ and the treating temperatures lower or higher than $750^{\circ}C$ caused the poor stoichiometries by the low hydrogen diffusivity and un-stability of $TiH_x$, respectively. Such experimental behavior was compared with thermodynamically calculated one. The hydrogenated $TiH_{1.99}$ sponge was fully ball-milled under -325 Mesh and the purity of pure titanium powders obtained by de-hydrogenation was about 99.6%.