http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
2006 IPCC 가이드라인 적용에 따른 폐기물 매립 부문의 온실가스 배출량 산정 및 변화 요인 분석
김란희(Ran-Hui Kim),박진규(Jin-Kyu Park),송상훈(Sang-Hoon Song),박옥윤(Ok-Yun Park),이남훈(Nam-Hoon Lee) 유기성자원학회 2020 유기물자원화 Vol.28 No.1
2015년 말 채택된 파리협정으로 2023년부터 5년 단위로 국제이행점검(Global stock-taking)이 진행될 예정이며, 국가 온실가스 인벤토리와 온실가스 감축 목표 달성 경과 등을 의무적으로 보고해야 한다. 이에 대비하여 온실가스 배출량 산정의 신뢰도를 향상시키고, 온실가스 배출원별 특성 파악과 배출량 관리가 중요한 시점이다. 이에 본 연구에서는 폐기물 매립 부문을 대상으로 2000 GPG, 2006 IPCC 가이드라인 및 2019 Refinement 산정방법에 따라 온실가스 배출량을 비교·분석하였다. 그 결과, 2016년 기준 시나리오 1에서는 2,287 Gg CO₂_eq, 시나리오 2-1은 1,870 Gg CO₂_eq, 시나리오 2-2는 10,886 Gg CO₂_eq, 시나리오 2-3은 10,629 Gg CO₂_eq, 시나리오 3은 12,468 Gg CO₂_eq으로 나타나 2000 GPG 대비 2006 IPCC 가이드라인 적용 시 온실가스 배출량이 증가하는 것으로 나타났다. 이러한 배출량 변화의 차이는 산정방식의 변화와 적용되는 배출계수 값에 기인하였으며, 이에 우리나라 특성에 따른 배출계수의 국가고유값 개발이 시급한 것으로 나타났다. Following the Paris Agreement adopted at the end of 2015, global stock-taking has been planned to be carried out on a 5-year basis from 2023, and it is mandatory to report on national GHG inventory and progress toward achieving greenhouse gas reduction targets. To prepare for this, it is important to improve the reliability of estimation of the greenhouse gas emission, identify the characteristics of each greenhouse gas emission source, and manage the amount of emissions. As such, this study compared and analyzed the amount of emissions from the landfill sector using the 2000 GPG, the 2006 IPCC Guidelines, and the 2019 Refinement estimation method. As a result, in comparison to 2016, there were 2,287 Gg CO₂_eq. in scenario 1, 1,870 Gg CO₂_eq. in scenario 2-1, 10,886 Gg CO₂_eq. in scenario 2-2, 10,629 Gg CO₂_eq. in scenario 2-3, and 12,468 Gg CO₂_eq. in scenario 3. Thus, when the 2006 IPCC Guidelines were applied with respect to 2000 GPG, it was revealed that greenhouse gas emissions have increased. Such difference in the emission changes was due to the changes in the calculation method and the emission factor values applied. Therefore, it is urgent to develop national-specific values of the emission factor based on characteristics of greenhouse gas emission in Korea.
시멘트 기반 재료를 혼합한 사면 안정용 녹생토의 물성 및 식생 영향성
최윤석(Yoon-Suk Choi),김주형(Joo-Hyung Kim),조영근(Young-Keun Cho),김호규(Ho-Kyu Kim),박옥윤(Ok-Yun Park) 한국건설순환자원학회 2021 한국건설순환자원학회 논문집 Vol.9 No.2
이 연구에서는 사면과의 부착력과 식물 생장력이 높은 식생기반재를 개발하고자, 시멘트 기반의 결합재와 기능성 첨가제를 혼합한 녹생토의 기초물성과 식물 생장에 미치는 영향을 평가하였다. 석고계 시멘트를 혼합한 녹생토(No.3)의 전단강도가 낮게 나타났으나, 식생 환경에 가장 적합한 경도 수준(23.6mm) 및 pH 값(7.4)을 나타냈다. 또한, 보습제를 첨가하여 성능을 개선한 녹생토의 초기 식생 발현은 일반 녹생토 비해 늦고 전도도값은 다소 높은 경향을 나타냈다. 반면, 성능을 개선한 녹생토는 타설면과의 부착력이 높았으며, 일정 시간 경과 후의 식물 생장 속도 및 동절기와 환절기 재생능력이 우월한 것으로 나타났다. An experimental study was carried out to investigate the applicability of cement-based materials for green soil which is a soil for promoting plant growth. The results show that the shear strength of the green soil mixed with gypsum cement (No.3) was low, but the hardness (23.6mm) and pH value (7.4) was most suitable for the vegetation environment. In addition, the initial vegetation germination of green soil, which improved performance by adding a moisturizer, was slower than that of general green soil, and the conductivity value tended to be slightly higher. On the other hand, the slope adhesion of advanced green soil was high, and it was found that the plant growth rate and the regeneration capacity were superior after time passed.